B65981A0000R097 TDK

Ferrites and Accessories PQ 50/50 Cores and coil former Series/Type: B65981A, B65982E Date: 2009-06-17 Version: 1 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the colour towhit (or invisible). This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbolPrevie and thenClos. Please do not alter the header or footer when copying the content. Identification/Classification 1: Ferrites and Accessories (header 1 + top left header bar) Identification/Classification 2: PQ 50/50 (header 2 + bottom left header bar) Ordering code: B65981A, B65982E0012D001 (top right header bar) Series/Type: PQ 50/50 (top right header bar) Preliminary data (optional): Preliminary data (if necessary) EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Department: SMP IN FER D PD Date: EPCOS AG is a TDK Group Company. 2009-06-17 PQ cores B65981A PQ 50/50 Preliminary data To IEC 62317-13 Delivery mode: sets Magnetic characteristics (per set) -1 l/A = 0.342 mm l = 113.0 mm e 2 A = 330.0 mm e 2 A = 290.0 mm min 3 V = 37270 mm e Approx. weight: 190 g/set Dimensions in mm Ungapped 1) Material A value P Ordering code L e V nH W/Set N87 6500 +30/-20% 1770 < 3.80 (100 kHz, 100 mT, 100 C) B65981A0000R087 N97 6700 +30/-20% 1825 < 3.50 (100 kHz, 100 mT, 100 C) B65981A0000R097 N95 8200 +30/-20% 2230 < 4.50 (100 kHz, 100 mT, 25 C-100 C) B65981A0000R095 < 5.40 (100 kHz, 100 mT, 120 C) N92 4700 +30/-20% 1170 < 6.5 (100 kHz, 100 mT, 100 C) B65981A0000R092 < 6.10 (100 kHz, 100 mT, 25 C) N51 8200 +30/-20% 2230 B65981A0000R051 < 6.50 (100 kHz, 100 mT, 100 C) 1) Measurement parameter: 10 kHz, 0.25 mT, 100 turns, room temperature. A value is measured acc. to IEC62044-2. An appropriate wringing of cores with polished surface is used to improve L reproducibility of the measurement. (It is recommended to rub the mating surfaces themselves six times in a circular or elliptic arc that matches the core profile before measuring A value). L KA IN FER D PD 2009-06-17 Please read Cautions and warnings and Page 2 of 5 Important notes at the end of this document.