CTVS Ceramic transient voltage suppressors SMD multilayer varistors (MLVs), automotive E series Series/Type: Date: December 2019 TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics prior express consent is prohibited.Multilayer varistors (MLVs) Automotive E series EPCOS type designation system for automotive series, single chips CT 0603 S 14 B AUTO E2 G2 Construction: CT Single chip with nickel barrier termination (AgNiSn) EAI case sizes: 0402 0603 0805 1206 1210 1812 2220 Varistor voltage tolerance: K 10%, standard L 10%, standard S Special tolerance Maximum RMS operating voltage (V ): RMS 14 14 V V < 25 V are suitable for 12 V DC supply systems RMS V 25 V are suitable for 24 V DC supply systems RMS Special tolerance for the varistor voltage: Standard tolerance A or B Special tolerance Standard series AUTO specified for load-dump/ jump-start protection (except CT0603S14BAUTOG and CT0805K17AUTOLCG) Special features: Standard energy handling capability E2 Increased energy handling capability HT High temperature version LC Low capacitance version CC Controlled capacitance version RF Radio frequency Taping mode: G Taped, 180-mm reel, 7 G2 Taped, 330-mm reel, 13 Please read Cautions and warnings and Page 2 of 86 Important notes at the end of this document.