B72724A8151V62 TDK

Ceramic transient voltage suppressors SMD multilayer transient voltage suppressors, high-speed series The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Deadline Last Last Shipments Withdrawal Orders B72762A8151V060 2012-11-09 2013-03-01 2013-06-01 B72762A8140S160 2012-11-09 2013-03-01 2013-06-01 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. EPCOS AG 2012. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited.Multilayer varistors (MLVs) High-speed series EPCOS type designation system for high-speed series CA 04 P2 S 14 T HS G Construction: CT Single chip with nickel barrier termination (AgNiSn) CA Chip array with nickel barrier termination (AgNiSn) Case sizes: 0201 0201 single chip 0402 0402 single chip 0603 0603 single chip 04 0405 array 05 0508 array 06 0612 array Number of elements per component: Single chip P2 Array with 2 elements P4 Array with 4 elements Tolerance of the varistor voltage: L 15% S Special tolerance V Special tolerance Maximum RMS operating voltage (V ): RMS 14 14 V Typical varistor voltage (V ): v 150 150 V Internal coding High-speed series Taping mode: G 180-mm reel Please read Cautions and warnings and Page 2 of 30 Important notes at the end of this document.