EMC filters 3-line filters Sine-wave output filters 300/520 V AC 400/690 V AC, 4 A ... 320 A, 40 C Series/Type: B84143V*R227 Date: December 2017 EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited. EPCOS AG is a TDK Group Company.Line reactors, output chokes and output filters B84143V*R227 Sine-wave output filters for 3-phase systems Sine-wave output filters for 3-phase systems Rated voltage V : 300/520 V AC and 400/690 V AC R Rated current I :4Ato320A R Construction 3-line filters Features Reduction of motor noise and eddy current losses Generation of sinusoidal phase-to-phase voltage with low ripple dv/dt reduction Easy to install Compact design 1) Degree of protection: IP20 up to 95 A Optimized for long motor cables and operation under full 2) load Natural cooling Wiring between inverter and filter must be shorter than 10 meters Up to 180 A: tube clip for convenient shield bonding UL approved insulation system T-EIS-CF1 Typical applications Frequency converters for motor drives, e.g. elevators pumps traction and conveyer systems HVAC systems (heating, ventilation and air conditioning) Terminals Up to 180 A: Finger-safe terminal blocks 250 A and 320 A: Copper busbars Marking Marking on component: Manufacturers logo, ordering code, rated voltage, rated current, rated motor frequency, rated switching frequency, rated temperature, climatic category, date code, approvals Minimum data on packaging: Manufacturer s logo, ordering code, quantity, date code 1) According to IEC 60529 2) The maximum permissible motor cable length depends on the application and must be checked. Please read Cautions and warnings and Page2of16 Important notes at the end of this document.