KPSA Series 4-15W AC-DC Board Mount Power Supplies Features Low pro le Smaller footprint PC board Mountable Low Cost UL Class II Approved Wide input range No external components needed Key Market Segments & Applications Speci cations Model KPS-5 KPS-10 KPS-15 Input Voltage range - 85 - 264VAC (47 - 440Hz) or 110 - 370VDC* Inrush Current A 30A at 240VAC, cold start at 25C Input Current (115/230VAC) A 0.13 / 0.07 0.27 / 0.13 0.4 / 0.2 Leakage Current mA 0.25mA maximum Temperature Coef cient - 0.05%/C Voltage Accuracy - 1% Minimum Load A None Load Regulation - 1% (10% to 100% load) Line Regulation - 0.5% (100-240VAC line change) Ripple & Noise (1) mV 1% or 50mV whichever is greater Short Circuit Protection - Continuous - hiccup mode Overvoltage Protection V 130-150%, Zener clamp Ef ciency (typical) % 72% 75% 75% Hold Up Time (Typ 115VAC input) ms 14ms at full load LED Indicator - Green LED = OK Operating Temperature (2) C Convection cooling: 0 to +70C, derating linearly to 25% load from 40 to 70C Storage Temperature C -20 to +85C Humidity (non condensing) - 10 - 95% RH Cooling - Convection or forced air Withstand Voltage - Input to Output 3kVAC 2 Vibration (non operating) - 23.52m/s (10 - 55Hz: constant sweep 1 min X, Y, Z for 1 hour) 2 Shock - < 196.1 m/s (20G) Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, Class II, CE Mark Conducted & Radiated EMI - EN55022-B, FCC Class B Immunity - EN61000-4 -2, -3, -4, -5, -6 Weight (Typ) g(oz) 29g (1oz) 60g (2oz) 80g (2.8oz) Size (WxLxH H above pcb) in. 1.28 x 2.17 x 0.83 1.55 x 2.40 x 0.9 1.77 x 2.75 x 0.79 Warranty yr One Year Notes: *Safety certi ed for AC input only (1) Measured with 0.1uF ceramic & 10uF electrolytic at 20MHz BW (2) 20CFM forced air ratings: KPSA5: 0 - 70C full load KPSA10: 0 - 70C full load (3.3V & 5V models derate linearly to 80% load from 50 to 70C) KPSA15: 0 - 70C derate linearly to 80% load from 50 to 70C 1-800-526-2324 www.us.tdk-lambda.com/lp/ 71 Disclaimer: us.tdk-lambda.com/lp/legal.htmKPSA Series Model Selector (other voltages available) KPSA5 Outline Drawing Output Maximum Peak Load Output -Vo Model Voltage (V) Output (A) (A)(3) Pwr (W) KPSA5-3R3 3.3 1.25 - 4.1 ACN KPSA5-5 5 1.0 - 5.0 KPSA5-12 12 0.42 - 5.0 KPSA5-15 15 0.33 - 5.0 KPSA5-24 24 0.23 - 5.5 KPSA10-3R3 3.3 2.5 3.8 8.3 ACL KPSA10-5 5 2.0 2.8 10.0 +Vo KPSA10-12 12 0.84 1.2 10.1 KPSA10-15 15 0.67 1.0 10.1 0.16 4.00 VR KPSA10-24 24 0.42 0.65 10.1 1.85 47.00 KPSA15-3R3 3.3 3.0 4.5 9.9 KPSA15-5 5 3.0 4.5 15.0 2.17 55.00 KPSA15-12 12 1.25 1.8 15.0 KPSA15-15 15 1.0 1.5 15.0 KPSA15-24 24 0.63 0.95 15.1 Notes (3) Average not to exceed max power, <30s, 10% duty cycle KPSA10 Outline Drawing 0.04 1.00 0.07 1.80 -Vo 1.85 47.00 ACN +Vo KPSA15 Outline Drawing ACL VR 0.14 3.48 -Vo 2.13 54.00 2.40 60.96 ACN +Vo ACL VR 0.16 4.10 0.04 1.00 2.44 62.00 0.07 1.80 2.75 69.90 2.13 54.00 Other Industrial Products ZPSA 20W to 60W KM 15 to 40W pcb mount medical 0.04 1.00 ZWS 5 to 240W, single output 0.07 1.80 2.44 62.00 For Additional Information, please visit us.tdk-lambda.com/lp/products/kps-series.htm 1-800-526-2324 www.us.tdk-lambda.com/lp/ 72 Revision A4: Apr 2015 1.55 39.47 0.69 17.50 0.17 4.40 0.12 3.15 0.15 3.80 0.06 1.60 0.08 2.00 max. 0.42 10.64 1.21 30.68 0.79 20.00 max. 1.77 45.00 0.79 20.00 0.17 4.40 1.28 32.61 0.16 4.00 0.15 3.80 0.79 20.14 0.17 4.40 0.10 2.64 0.15 3.80 0.06 1.60 0.40 10.18 0.08 2.00 max. 0.06 1.60 1.19 30.19 0.83 21.00 max. 0.08 2.00 max. 0.49 12.50 1.40 35.50 0.79 20.00 max.