(1/5) Conformity to RoHS Directive SMD Inductors(Coils) For High Frequency(Multilayer) MLG Series MLG0603Q Type FEATURES PRODUCT IDENTIFICATION It serializes a product of inductance 0.2 to100nH. In a product of MLG 0603 Q 2N2 S T 0.2 to 4.0nH, it realizes line up in a 0.1nH steps. (1) (2) (3) (4) (5) (6) By the most suitable design, Q is higher than competing in a conventional product MLG0603S type. In particular, Q in more (1) Series name than 800MHz largely improved. Advanced monolithic structure is formed using a multilayering (2) Dimensions and sintering process with ceramic and conductive materials for 0603 0.6 0.3mm (L W) high-frequency. The products contain no lead and also support lead-free (3) Material code soldering. It is a product conforming to RoHS directive. (4) Inductance value 2N2 2.2nH APPLICATIONS 12N 12nH For high-frequency applications including mobile phones, high frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB (5) Inductance tolerance and tuners. B 0.1nH C 0.2nH SHAPES AND DIMENSIONS S 0.3nH H3% 0.60.03 J5% (6) Packaging style T Taping (reel) 0.060.04 SPECIFICATIONS Operating temperature range 55 to +125C Storage temperature range 55 to +125C PACKAGING STYLE AND QUANTITIES Weight: 0.2mg Packaging style Quantity 0.150.05 Dimensions in mm Taping 15000 pieces/reel RECOMMENDED PC BOARD PATTERN HANDLING AND PRECAUTIONS 0.25 0.3 0.25 Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and Dimensions in mm product temperature does not exceed 150C. After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. RECOMMENDED SOLDERING CONDITION When hand soldering, apply the soldering iron to the printed REFLOW SOLDERING circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating Soldering 60 to 120s 30 to 60s Time(s) Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. Please contact our Sales office when your application are considered the following: The devices failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) All specifications are subject to change without notice. 005-03 / 20090925 / e521 mlg0603q.fm 0.30.03 0.30.03 0.3(2/5) ELECTRICAL CHARACTERISTICS Self-resonant DC resistance frequency Inductance Inductance Q Test frequency Rated current () Part No. (nH) tolerance min. L, Q (MHz) (GHz) (mA)max. min. typ. max. typ. 0.2 0.1, 0.2nH 100 10.0 20 up 0.10 0.01 600 MLG0603Q0N2 T 0.3 0.1, 0.2nH 100 10.0 20 up 0.10 0.02 600 MLG0603Q0N3 T 0.4 0.1, 0.2nH 100 10.0 20 up 0.10 0.02 600 MLG0603Q0N4 T 0.5 0.1, 0.2nH 100 10.0 20 up 0.10 0.02 600 MLG0603Q0N5 T 0.6 0.1, 0.2nH 100 10.0 20 up 0.10 0.03 600 MLG0603Q0N6 T 0.7 0.1, 0.2nH 100 10.0 20 up 0.10 0.04 600 MLG0603Q0N7 T 0.8 0.1, 0.2nH 100 10.0 17.5 0.10 0.03 600 MLG0603Q0N8 T 0.9 0.1, 0.2nH 100 10.0 16.3 0.10 0.04 600 MLG0603Q0N9 T 1.0 0.1, 0.2, 0.3nH 5 100 10.0 14.2 0.10 0.06 600 MLG0603Q1N0 T 1.1 0.1, 0.2, 0.3nH 5 100 10.0 14.9 0.15 0.06 550 MLG0603Q1N1 T 1.2 0.1, 0.2, 0.3nH 5 100 10.0 14.7 0.15 0.05 550 MLG0603Q1N2 T 1.3 0.1, 0.2, 0.3nH 5 100 10.0 13.6 0.15 0.05 550 MLG0603Q1N3 T 1.4 0.1, 0.2, 0.3nH 5 100 9.0 12.0 0.15 0.06 550 MLG0603Q1N4 T 1.5 0.1, 0.2, 0.3nH 5 100 9.0 10.7 0.20 0.08 550 MLG0603Q1N5 T 1.6 0.1, 0.2, 0.3nH 5 100 9.0 11.3 0.20 0.08 500 MLG0603Q1N6 T 1.7 0.1, 0.2, 0.3nH 5 100 8.5 10.0 0.20 0.08 500 MLG0603Q1N7 T 1.8 0.1, 0.2, 0.3nH 5 100 8.5 10.3 0.20 0.09 500 MLG0603Q1N8 T 1.9 0.1, 0.2, 0.3nH 5 100 7.5 8.9 0.20 0.08 500 MLG0603Q1N9 T 2.0 0.1, 0.2, 0.3nH 5 100 7.5 9.4 0.20 0.09 500 MLG0603Q2N0 T 2.1 0.1, 0.2, 0.3nH 5 100 7.5 8.8 0.20 0.09 500 MLG0603Q2N1 T 2.2 0.1, 0.2, 0.3nH 5 100 7.5 9.3 0.20 0.08 500 MLG0603Q2N2 T 2.3 0.1, 0.2, 0.3nH 5 100 7.5 10.0 0.30 0.17 450 MLG0603Q2N3 T 2.4 0.1, 0.2, 0.3nH 5 100 7.5 9.3 0.30 0.14 450 MLG0603Q2N4 T 2.5 0.1, 0.2, 0.3nH 5 100 7.0 9.1 0.30 0.17 450 MLG0603Q2N5 T 2.6 0.1, 0.2, 0.3nH 5 100 6.5 8.0 0.30 0.13 450 MLG0603Q2N6 T 2.7 0.1, 0.2, 0.3nH 5 100 6.5 7.7 0.30 0.11 450 MLG0603Q2N7 T 2.8 0.1, 0.2, 0.3nH 5 100 6.2 7.9 0.30 0.14 300 MLG0603Q2N8 T 2.9 0.1, 0.2, 0.3nH 5 100 6.2 7.6 0.30 0.13 300 MLG0603Q2N9 T 3.0 0.1, 0.2, 0.3nH 5 100 6.0 7.4 0.30 0.12 300 MLG0603Q3N0 T 3.1 0.1, 0.2, 0.3nH 5 100 6.0 7.2 0.30 0.15 300 MLG0603Q3N1 T 3.2 0.1, 0.2, 0.3nH 5 100 6.0 7.1 0.30 0.15 300 MLG0603Q3N2 T 3.3 0.1, 0.2, 0.3nH 5 100 5.8 7.1 0.30 0.15 300 MLG0603Q3N3 T 3.4 0.1, 0.2, 0.3nH 5 100 5.8 7.1 0.30 0.15 300 MLG0603Q3N4 T 3.5 0.1, 0.2, 0.3nH 5 100 5.8 6.8 0.35 0.18 300 MLG0603Q3N5 T 3.6 0.1, 0.2, 0.3nH 5 100 5.8 7.4 0.35 0.20 300 MLG0603Q3N6 T 3.7 0.1, 0.2, 0.3nH 5 100 5.8 7.4 0.40 0.23 300 MLG0603Q3N7 T 3.8 0.1, 0.2, 0.3nH 5 100 5.8 7.3 0.40 0.23 300 MLG0603Q3N8 T 3.9 0.1, 0.2, 0.3nH 5 100 5.8 7.3 0.40 0.24 300 MLG0603Q3N9 T 4.0 0.1, 0.2, 0.3nH 5 100 5.8 7.1 0.40 0.23 300 MLG0603Q4N0 T 4.3 3%, 0.3nH 5 100 5.2 6.4 0.40 0.21 300 MLG0603Q4N3 T 4.7 3%, 0.3nH 5 100 5.2 6.9 0.45 0.25 300 MLG0603Q4N7 T 5.1 3%, 0.3nH 5 100 5.0 6.0 0.50 0.30 250 MLG0603Q5N1 T 5.6 3%, 0.3nH 5 100 4.2 5.5 0.50 0.28 250 MLG0603Q5N6 T 6.2 3%, 0.3nH 5 100 4.2 5.3 0.55 0.32 250 MLG0603Q6N2 T 6.8 3, 5% 5 100 4.2 5.5 0.60 0.34 250 MLG0603Q6N8 T 7.5 3, 5% 5 100 3.8 4.8 0.70 0.36 220 MLG0603Q7N5 T 8.2 3, 5% 5 100 3.8 4.9 0.70 0.44 220 MLG0603Q8N2 T 9.1 3, 5% 5 100 3.6 4.4 0.80 0.49 200 MLG0603Q9N1 T 10 3, 5% 5 100 3.6 4.7 0.80 0.52 200 MLG0603Q10N T 11 3, 5% 6 100 3.6 4.5 0.80 0.48 200 MLG0603Q11N T 12 3, 5% 6 100 3.0 3.8 1.00 0.56 180 MLG0603Q12N T 13 3, 5% 6 100 3.0 3.9 1.00 0.63 180 MLG0603Q13N T 15 3, 5% 6 100 3.0 3.8 1.10 0.69 180 MLG0603Q15N T 16 3, 5% 6 100 2.8 3.6 1.10 0.64 180 MLG0603Q16N T 18 3, 5% 6 100 2.5 3.3 1.20 0.75 150 MLG0603Q18N T : Please specify inductance tolerance, B (0.1nH), C (0.2nH), S (0.3nH), H (3%) or J (5%). Test equipment Inductance Q : HP4291A+16197A, or equivalent SRF: HP8720C, or equivalent Rdc: YOKOGAWA TYPE7561, or equivalent All specifications are subject to change without notice. 005-03 / 20090925 / e521 mlg0603q.fm