Rev. A (12/17) Page 1 of 2 G3 No-Clean Flux Remover Product 1634 Product Description Residues from higher, lead-free temperatures are more baked on and harder to clean. G3 No-Clean Flux Remover has been proven very effective at removing fluxes baked on at lead-free temperatures. It has a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Features / Benefits Powerful cleaner Nonflammable Rapid evaporation Zero residue Proven effective for lead-free processes Non-ozone depleting Usage Instructions Typical Product Data and Physical Properties Physical state: Liquid Make sure opening of spray head is pointing toward surface to be cleaned. Hold can 15-20 cm away. Direct spray to saturate soiled Odor: Faint ethereal odor surface. A TechBrush (2000 Series) may be utilized to help in the Appearance: Clear, colorless liquid removal of heavy soils. When used as a general cleaner, start at top Percent volatile: 100 of area to be cleaned using a sweeping motion, and spray the area Vapor Pressure: 144.85 mmHg 20C slowly, working towards the bottom. To clean in hard to reach areas, Vapor density: >1 (Air=1) insert extension tube in spray head to direct spray. Allow Boiling point: 102.2F (39C) components to dry completely before applying current. For flat Flashpoint and method: None to boiling point surface cleaning, saturate a lint-free TechClean Twill wipe (2357) or Purwipe (2355) and wipe surface with cloth. Rotate the cleaning Evaporation rate: <1 (TCE=1) side of the wipe periodically and re-saturate. Density: 1.22 at 25C VOC: 64% by weight (EPA) Material Compatibility 75% weight VOC (CARB) Shelf life: 5 years Plastics & Rubber Compatibility ABS: Not Compatible Nylon: Excellent Lexan: Not Compatible HDPE: Excellent LDPE: Excellent C.E.Phenolic: Excellent PMMA: Not Compatible POM: Excellent PP: Excellent PS: Not Compatible PTFE: Excellent PVC: Excellent 800-858-4043 www.techspray.com Rev. A (12/17) Page 2 of 2 G3 No-Clean Flux Remover Product 1634 Packaging and Availability 1634-12S 12 oz. (340g) Aerosol Environmental Policy Techspray is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies. Resources Techspray products are supported by global sales, technical and customer services resources. For additional technical information on this product or other Techspray products in the United States, call the technical sales department at 800-858-4043, email tsales techspray.com or visit our web site at: www.techspray.com. Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techsprays only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray be liable for any special, incidental, or consequential damages based on breach of warranty, negligence or any other theory. North America Europe Countries outside the US ITW Contamination Control BV Call to locate a distributor in your Techspray Saffierlaan 5, 2132 VZ Hoofddorp country 8125 Cobb Center Drive The Netherlands Kennesaw, GA 30152 +31 88 1307 400 800-858-4043 info itw-cc.com tsales techspray.com