Rev. A (05/18) Page 1 of 2 Anti-Static Freezer Product 1747 Product Description Rapidly evaporating liquid that super-chills isolated areas. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors, and other defective components. It also increases visibility of cold solder joints, cracks in printed circuit boards and oxidized junctions. Contains additive that avoids static build-up, critical when working with ESD-sensitive components. Features / Benefits Avoids static build-up Nonflammable Non-ozone depleting Moisture free Zero residue Safe on plastics Chills down to -60F (-51C) Typical Product Data and Physical Properties Applications Physical state: Gas (aerosol) Cool Equipment for Testing Color: Clear, colorless Dissipate Heat While Soldering or Desoldering Odor: Ethereal, faint odor Isolate Thermal Intermittent Components Test Circuit Traces for Continuity Boiling/condensation point: -15.2F (-26.2C) Test Printed Circuit Boards for Stress Fractures Melting/freezing point: -149.8F (-101C) Track Intermittent Failures and Shorts Vapor density: 3.5 Air=1 Volatility: 100% Product Description Always be sure that sprayhead is aimed at surface to be chilled. Allow VOC EPA 0% components to heat up to normal operating temperature or until CARB Exempt intermittent fault occurs. Spray suspected components until chilled. Shelf life: 10 years Product will freeze small areas. Due to the colder temperature and the more aggressive nature of the product, it is possible that prolonged spraying may cause blistering of some conformal coating or deterioration of some plastics. Always test on a inconspicuous area before using. Can crack ceramics and other temperature sensitive components. 800-858-4043 www.techspray.com Rev. A (05/18) Page 2 of 2 Anti-Static Freezer Product 1747 Material Compatibility Packaging and Availability Buna-N: Fair 1747-10S 10 oz. Aerosol Graphite: Good HDPE: Good Environmental Policy LDPE: Good Techspray is committed to developing products to ensure a safer Lexan: Poor and cleaner environment. We will continue to meet and sustain the Neoprene: Good regulations of all federal, state and local government agencies. Cross-Linked PE: Good Polyacrylate: Poor Resources Polystyrene: Good PVC: Good Techspray products are supported by global sales, technical and Silicone Rubber: Fair customer services resources. Teflon: Good For additional technical information on this product or other Viton: Poor Techspray products in the United States, call the technical sales department at 800-858-4043, email tsales techspray.com or visit our web site at: www.techspray.com. Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techsprays only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray be liable for any special, incidental, or consequential damages based on breach of warranty, negligence or any other theory. Europe North America Countries outside the US ITW Contamination Control BV Call to locate a distributor in your Techspray Saffierlaan 5, 2132 VZ Hoofddorp country 8125 Cobb Center Drive The Netherlands Kennesaw, GA 30152 +31 88 1307 400 800-858-4043 info itw-cc.com tsales techspray.com