0024K0214
SPECIFICATION CONTROL DRAWING
Date:
07-24-06
100 OHM, AWG 24, 19 STRANDS OF AWG 36,
Revision:
CHEMINAX
TWIN CONDUCTOR CABLE, OUTER SPACE USE C
THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.
CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS
DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE
DESIGNATED.
CHARACTERISTIC IMPEDANCE 100 7 ohms, Method C at 1 MHz
CAPACITANCE - MUTUAL 14.5 pF/ft. (nominal) at 1 MHz
CONDUCTOR
AWG 24, 19 Strands of VELOCITY OF PROPAGATION 76% (nominal)
.025 AWG 36, Silver-Coated
High Strength Copper
Alloy
DIELECTRICS
.051
Rayfoam L
Colors - Tan / White
ADDITIONAL REQUIREMENTS
.035
FILLERS
Radiation-Crosslinked
ELECTRICAL
Modified ETFE
CONDUCTOR RESISTANCE 26.5 ohms/1000 ft. (nominal)
INSULATION RESISTANCE 10,000 megohms (minimum)
for 1000 ft.
JACKET FLAWS
SPARK TEST 1.0 kV (rms)
IMPULSE TEST 6.0 kV (peak)
VOLTAGE WITHSTAND
SHIELD
(DIELECTRIC) 1000 volts (rms)(minimum)
.119
AWG 38,
Silver-Coated Copper
ENVIRONMENTAL
FLAMMABILITY Method B
HEAT SHOCK 225C
LOW TEMPERATURE- -55C/4.00 inch mandrel
COLD BEND
VOLTAGE WITHSTAND
(POST ENVIRONMENTAL) 1000 volts (rms), for 1 minute
PHYSICAL
JACKET
Radiation-Crosslinked,
.143
INSULATION (DIELECTRIC)
Modified PVF
2
(Prior to cabling)
ELONGATION 50% (minimum)
TENSILE STRENGTH 1000 lbf/in (minimum)
JACKET
ELONGATION 200% (minimum)
TENSILE STRENGTH 4000 lbf/in (minimum)
JACKET THICKNESS .012 inch (nominal)
SHIELD COVERAGE 90% (minimum)
WEIGHT 15.3 lbs/1000 ft. (nominal)
OUTER SPACE REQUIREMENTS
RADIATION RESISTANCE 500 megorads / 4.25 inch mandrel
VACUUM STABILITY
Outer jacket color will be white (designated by a9" appended
TOTAL MASS LOSS (TML) 1.0% (maximum)
to the part number, e.g. 0024K0214-9) unless otherwise specified.
VOLATILE CONDENSABLE 0.1% (maximum)
Designate outer jacket color with a dash number in accordance
MATERIAL (VCM)
with MIL-STD-681. Other codes and suffixes may be added to the
part number, as necessary, to capture any additional requirements
imposed by the purchase order.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
501 Oakside Avenue
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
RR
RRR
Redwood City, California 94063-3800
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Wire & Cable
1-800-227-8816 Fax: 1-650-361-6297
2006 Tyco Electronics Corporation. All rights reserved.