General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR2M n 2 pole relay with force guided contacts according to EN 50205 n Reinforced insulation between poles Typical applications F0188-D Emergency shut-off, press control, machine control, elevator and escalator control, safety relays VZT Approvals Coil Data (contunied) VDE 116064, UL E214025, TUV 968/EZ 111, CQC0617015579 Technical data of approved types on request Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil Contact Data code voltage voltage voltage resistance power 1) Contact arrangement 1 form A + 1 form B contacts VDC VDC VDC 10% mW (1 NO + 1 NC) or 015 15 11.3 1.5 321 701 2 form C contacts (2 CO) 018 18 13.5 1.8 483 671 According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 021 21 16 2.1 630 700 21-24) shall be used as force guided contacts. 024 24 18 2.4 823 700 Rated voltage 250VAC 036 36 27 3.6 1851 700 Max. switching voltage 400VAC 040 40 30 4.0 2286 700 1) Rated current 6A 048 48 36 4.8 3291 700 1) Contact material AgNi 060 60 45 6 5142 700 1) Contact style single contact, force guided 080 85 63.8 8.5 9143 790 1) 1 form A + B, 1 NO + 1NC type A according to EN 50205 110 110 83 11 17285 700 1) Coil resistance 12%. 2 form C, 2CO type B according to EN 50205 All figures are given for coil without pre-energization, at ambient temperature +23C. Min. recommended contact load 5V/10mA Initial contact resistance 100m at 1A, 24VDC 20 at 10mA, 5VDC -1 Frequency of operation, with/without load 6/300min Contact ratings, IEC60947-5-1, on 1 form A (NO) contact AC15-3A DC13-6A 6 Mechanical endurance 10x10 operations Insulation Initial dielectric strength between open contacts 1500V rms Coil Data between contact and coil 4000V rms Coil voltage range 5 to 110VDC between adjacent contacts 3000V rms Clearance/creepage Coil versions, DC-coil between open contacts microdisconnection Coil Rated Operate Release Coil Rated coil between contact and coil 8/8mm code voltage voltage voltage resistance power between adjacent contacts 5.5/5.5mm 1) VDC VDC VDC 10% mW Insulation to EN 50178, type of insulation 005 5 3.8 0.5 35.7 700 between contact and coil reinforced 006 6 4.5 0.6 51 706 between adjacent contacts reinforced 009 9 6.8 0.9 116 698 012 12 9 1.2 206 699 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Force Guided Relays SCHRACK Force Guided Relay SR2M (Continued) Other Data PCB layout / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -25 to 70C 2 form C, 2 CO contacts Category of environmental Protection IEC 61 810 RTIII Weight 20g Resistance to soldering heat THT IEC 60068-2-20 260C/5s Packaging/unit tube/20 pcs. For more detailed information see product specification 2158001 S0163-CO S0163-BJ Dimensions 1 form A + 1 form B contacts, 1 NO + 1 NC S0163 CU S0273-BB S0163-CV 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company