016548827 TE Connectivity

T01120 001229 How to connect ground terminal blocks electrically to the mounting rail Screwdriver Movable foot ensures positive connection to the rail DIN 3 rail DIN 1 rail 2. Screw down the center of the block to tighten the movable foot on the rail 1. Position the block on the mounting rail Blocks can slide on the rail before tightening. MA 2,5/5.P M 4/6.P M 4/6.3A.P Ground terminal blocks Spacing 5 mm + 0,08 .200 Spacing 6 mm + 0,05 .238 Spacing 6 mm + 0,05 .238 electrically connected to the mounting rail Compression clamp DIN 1 - 3 R 2 1 Type Part number Type Part number Type Part number Green-yellow Green-yellow Green-yellow - UL 94 V0 MA 2,5/5.P 0165 488.27 MA 4/6.P 0165 113.16 M 4/6.3A.P.V0 0195 637.12 MA 2,5/5.P.V0 0195 488.16 MA 4/6.P.V0 0195 113.05 Terminal block for ground wire, same size Terminal block for ground wire, same size Terminal block for ground wire, same size as MA 2,5/5 terminal block. as M 4/6 terminal block. as M 4/6.3A terminal block. IEC IEC IEC UL CSA UL CSA UL CSA Characteristics NFC-DIN NFC-DIN NFC-DIN Compression Solid wire Wire size 0,2-4 mm 24-12 AWG 24-12 AWG 0,2-4 mm 24-10 AWG 24-10 AWG 0,2-4 mm 22-10 AWG 12 AWG max. clamp Stranded wire 0,22-2,5 mm 24-12 AWG 24-12 AWG 0,22-4 mm 24-10 AWG 24-10 AWG 0,22-4 mm 22-10 AWG 12 AWG max. Short circuit current 300A/1s 480A/1s 480A/1s 2,5 mm/A3 12 AWG 12 AWG 4 mm/A4 10 AWG 10 AWG 4 mm/A4 10 AWG 12 AWG Rated wire size / Gauge Wire stripping Recomm. Recomm. Protection Wire stripping Recomm. Recomm. Protection Wire stripping Recomm. Recomm. Protection Other characteristics length screwdriver torque length screwdriver torque length screwdriver torque 10 mm 3.5 mm 0,4-0,6 Nm 9,5 mm 4 mm 0,5-0,8 Nm 9,5 mm 4 mm 0,5-0,8 Nm .39 .14 3.5-5.3 lb.in .37 .16 4.4-7 lb.in .37 .16 4.4-7 lb.in Approvals Type Part number Type Part number Type Part number Accessories 1 End section yellow FEM6 th. 2,8 mm 0103 062.21 FEM6 th. 2,8 mm 0103 062.21 FEM3AP V0 green th. 3 mm 0199 876.26 yellow FEM6 V0 th. 2,8 mm 0199 305.02 FEM6 V0 th. 2,8 mm 0199 305.02 2 Separator end section grey SCF6 th. 3 mm 0118 707.03 SCF6 th. 3 mm 0118 707.03 On rail : Recomm.screwdriver/Recomm.torque 3,5 mm .14 / 0,6 Nm 5.5 lb.in 4 mm .16 / 0,8 Nm 7.0 lb.in 4 mm .16 / 0,8 Nm 7.0 lb.in R See markers marking method 10 12 11 12 11 12 78X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for entrelec manufacturer: Other Similar products are found below : 023103024 023000107 1SNK505310R0000 017322627 011762822 016511417 016340320 1SNK516020R0000 023300421 1SNK510010R0000 018731214 011870703 010500220 011511607 023300227 016049626 017666704 1SNK508411R0000 023300320 016548827 023300001 012511813 017301610 011546820