MT3000 Altera medical-grade, thin wall, flexible, fluoropolymer heat-shrinkable tubing Altera MT3000 heat-shrinkable tubing Altera MT3000 tubing provides Altera MT3000 tubing may be sterilized is tough, flexible tubing with a very electrical insulation and strain relief by radiation, ethylene oxide, and dry thin wall construction. It is especially for components that are exposed to heat with no significant change in suitable for applications requiring high high temperatures - either during properties. It is fabricated from temperature performance and operation or during sterilization. With materials that meet the requirements resistance to abrasion, cut-through, its exceptional flexibility and thin-wall of U.S. Pharmacopeia (USP) Class VI and a variety of fluids. In polar media, construction, Altera MT3000 tubing is plastics (contact with injectables and such as aqueous systems and ideal for applications where pliancy body fluids or tissue). alcohols, property retention and coupled with small overall bundle dimensional stability are exceptional. size is desired. Temperature rating Full recovery temperature: 150C Continuous operating temperature: 55C to 150C Recommended maximum temperature for use as a primary insulator: 135C Specifications* Type Raychem Material Master File Number MT3000 MT3000 SCD USP Class VI MAF-472 *When ordering, always specify latest issue. Dimensions (millimeters/inches) W Expanded as supplied Fully recovered after heating d D Inside diameter Wall thickness D (min.) d (max.) W Expanded Recovered after Recovered after Size as supplied heating heating** 3/64*** 1.2 0.046 0.6 0.023 0.25 0.05 0.010 0.002 1/16 1.6 0.063 0.8 0.031 0.25 0.05 0.010 0.002 3/32 2.4 0.093 1.2 0.046 0.25 0.05 0.010 0.002 1/8 3.2 0.125 1.6 0.062 0.25 0.05 0.010 0.002 3/16 4.8 0.187 2.4 0.093 0.25 0.05 0.010 0.002 1/4 6.4 0.250 3.2 0.125 0.30 0.05 0.012 0.003 3/8 9.5 0.375 4.8 0.187 0.30 0.05 0.012 0.003 1/2 12.7 0.500 6.4 0.250 0.30 0.05 0.012 0.003 3/4*** 19.1 0.750 9.5 0.375 0.43 0.08 0.017 0.003 1*** 25.4 1.000 12.7 0.500 0.48 0.08 0.019 0.003 **Wall thickness will be less if tubing recovery is restricted during shrinkage. ***Nonstandard size available by special order only. Ordering information Colors Standard Black Nonstandard White Size selection Always order the largest size that will shrink snugly over the component being covered. A variety of special order sizes may be made available upon request. Standard packaging On plastic spools, double-bagged Ordering description Specify product name, size, and color, for example MT3000 1/4-0 (0=Black).Specification values Property Unit Requirement Method of test Physical Dimensions mm (inches) See reverse ASTM D 2671 Longitudinal change percent +0, -10 ASTM D 2671 Concentricity as supplied percent 70 minimum ASTM D 2671 Tensile strength psi (Mpa) 4000 (27.6) minimum ASTM D 2671 Ultimate elongation percent 300 minimum ASTM D 2671 Secant modulus (recovered) psi (Mpa) 50,000 (345) maximum ASTM D 2671 Heat resistance ASTM D 2671 (336 hours at 225C/437F) Followed by test for: Ultimate Elongation percent 250 minimum ASTM D 2671 Electrical Dielectric strength volts/mil (volts/mm) 500 (19,680) minimum ASTM D 2671 Dielectric withstand seconds 60 minimum ASTM D 2671 3000 V, 60 Hz Chemical Fluid resistance ASTM D 2671 (24 hours at 23C/73F) in: Isopropyl Alcohol 5% Saline Solution Cidex* Followed by tests for: Dielectric strength volts/mil (volts/mm) 400 (15,760) minimum ASTM D 2671 Tensile strength psi (Mpa) 3500 (24.1) minimum ASTM D 2671 Heavy metals analysis ppm 1 maximum (total of all metals) USP XXII Cadmium Physiochemical Mercury Tests - Plastics Lead Bismuth Antimony Typical performance values Property Unit Performance Method of Test Electrical Dielectric strength** volts/mil (volts/mm) ASTM D 2671 0.005 < IWT 0.010 1200 (47,244) 0.010 < IWT 0.015 1000 (39,370) 0.015 < IWT 0.020 700 (27,559) *Trademark of Johnson & Johnson Company **IWT = Installed wall thickness. Or equivalent dilute glutaraldehyde sterilizing solution. Note: Consult the MT3000 SCD for specific details about test procedures. Altera and Raychem are trademarks of Tyco Electronics Corporation. Users should independently evaluate the suitability of the product for their application. Tyco Electronics Corporation 300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2 USA United Kingdom Japan Singapore 569507 Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151 Tel:+1 (650) 361-3860 (All other countries) All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporations only obligations are those in the Standard Terms and Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Tyco Electronics Corporations Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing without notification to the Buyer which do not affect compliance with any applicable specification. For more information about this product visit www.tycoelectronics.com 1993-1994, 2002 Tyco Electronics Corporation Printed in USA 1654063 6/02