101A094-3/86-0 TE Part 037347-000 TE Internal : 101A094-3/86-0 101A094-3/86-0 ACTIVE Raychem TE Part 037347-000 TE Internal : 101A094-3/86-0 View on TE.com> Harnessing > Heat Shrink Components > End Caps Wall Type: Dual Material Code: 3 Sealant: Yes Material Systems Code: 10 Adhesive Pre-Coat: Yes Features Product Type Features Size Code 94 Wall Type Dual Body Features Color Black Material Crosslinked Polyolefin Shrink Ratio 2:1 Pliancy Flexible Lining Type Adhesive Material Code 3 Sealant Yes Material Systems Code 10 Adhesive Pre-Coat Yes Dimensions Length 114 mm 4.5 in Recovered Inside Diameter (Max) 38.1 mm 1.5 in Recovered Wall Thickness (Nominal) 3.05 mm .12 in Expanded Inside Diameter (Min) 83.8 mm 3.3 in Wall Thickness Medium Usage Conditions Flammability Flame-Retardant 08/20/2019 07:52AM Page1 For support call+1 800 522 6752 101A094-3/86-0 TE Part 037347-000 TE Internal : 101A094-3/86-0 Flammability Flame-Retardant Resistance Protection Suitable for occasional exposure to fluids Resistance Properties Immersion Protection Operating Temperature Range -55 135 C -67 275 F Industry Standards Government Qualified No Other Adhesive Code /86 Precoat Molded Part Shape Code 101A Adhesive Type High Performance Pre-Coat Adhesive Adhesive Options /86 Precoat Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 SvHCs : 2019 1197 SvHCs: 20191 197 Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be updating its statements accordingly. 08/20/2019 07:52AM Page2 For support call+1 800 522 6752 Compatible Parts