15-Serie 3500-A 18-Serie 3500-A 30/10/14 15:23 Page96 3500 series High performance toggle switches - environmentally sealed Distinctive features and specifications UG1410A Completely sealed switches withstanding 0,1 bar pressure Frontal sealing to IP67 or IP69K by a silicone membrane (for sealed panel mounting, add washer U60, section I). Rear sealing to IP 64 provided by moulded-in terminal inserts A Approved to European standards CECC 96000 Three types of terminals Many lever styles available ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load and electrical life at full load: Case : mineral filled polyester see table below UL94-V0 Initial contact resistance : 10 m max. at 1A 2VDC Bushing and cover : zamac Insulation resistance : 1.000 M Actuator : brass, nickel or chrome Dielectric strength : 2.500 Vrms 50 Hz min. between terminals plated, or anodized aluminium 3.000 Vrms 50 Hz min. between terminals and frame Contacts : silver alloy FUNCTIONS GENERAL PERFORMANCES AGENCY APPROVAL 10.000 cycles, T20C ON-OFF 15A 28VDC resistive CECC 96201-004 et 15A 28VDC inductive ON-ON 5A 28VDC lamp Availability : consult factory for 10.000 cycles, T20C details of approved models. 15A 28VDC resistive ON OFF ON Marking : to order switches 15A 28VDC inductive marked CECC, complete 5A 28VDC lamp appropriate box of ordering 10.000 cycles, T20C format. AUTRES 15A 28VDC resistive FONCTIONS 10A 28VDC inductive 3A 28VDC lamp GENERAL SPECIFICATIONS Mechanical life : 40.000 cycles Torque : 2 Nm (1.47 Ft.lb) max. applied to nut Panel thickness : see Mounting Accessories on the following pages Operating temperature : -40c to +85C Moisture resistance : 56 days The company reserves the right to change specifications without notice. A-96 www.apem.com APEM15-Serie 3500-A 18-Serie 3500-A 30/10/14 15:23 Page97 3500 series High performance toggle switches - environmentally sealed Overview 35 SERIES Number of poles Electrical functions Electrical functions (continued) Terminals 1 6 3 Single pole 1-0 ON - OFF 0 Screw 4-6 MOM ON MOM A 4 Double pole 2-0 ON - m.OFF 2 Solder lug/quick-connect 5-0 ON - MOM 3-0 OFF - MOM 3 Normalized quick- 6-0 ON - ON 3 4 4-1 ON ON ON connect 7-0 MOM OFF MOM 3 4 4 Screw + clamp 4-2 ON ON MOM 8-0 ON OFF MOM 3 4 4-3 MOM ON MOM 9-0 ON OFF ON 1 6 4-4 ON ON ON Function 4 : double pole only 1 6 4-5 ON ON MOM Lever styles Lever locking styles Accessories 1 Standard, length 17,5 mm (.688) 0 No locking 0 2 hex nuts, 1 locking or locking, length 20 mm (.787) A Locked in 3 positions ring and 1 lockwasher 2 Length 30 mm (1.181) D Locked out of center position 2 2 hex nuts and 1 sealing 3 Flatted, length 24 mm (.944) G Locked in keyway side washer 4 Length 40 mm (1,574) See drawings on the following pages. 5 Length 50 mm (1.968) 6 Locking, length 25,4 mm (1.000) Lever finish Agency approval Locking lever special finish 0 None N Bright nickel (blank) None 1 CECC B Satin chrome P5 Painted yellow G* Black A6 Anodized red F* Black with fluorescent tip Order with lever finish type C. (lever type 1 only) Other colours : on request. C Painted or anodized * Black finish on bushing too. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - their options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Security caps are available to prevent inadvertent lever operation. They are presented in section I. Packaging unit : 25 pieces APEM www.apem.com A-97