Application Specification DEUTSCH* Size 16 Stamped and Formed (S&F) 114-151000 Pin and Socket Contacts 06 FEB 21 Rev L NOTE All numerical values are in metric units with U.S. customary units in brackets . Dimensions are in millimeters and inches . Unless otherwise specified, dimensions have a tolerance of 0.13 .005 and angles have a tolerance of 2. Figures and illustrations are for identification only and are not drawn to scale. NOTE In the event that there are difference between the information presented in this application specification versus the information found in other instruction material, this application specification will take precedence. 1. INTRODUCTION This specification covers the requirements for application of DEUTSCH size 16 S&F pin and socket contacts. These contacts are used in any DEUTSCH connector having size 16 contact cavities. Each contact features a wire barrel, insulation barrel, retention shoulder, and mating end. The socket features a protective sleeve. In use, the retention shoulder holds the contact in the connector. The contacts are available in loose-piece and strip-fed form for terminating using a hand tool or automatic machine. When corresponding with personnel, use the terminology provided in this specification to facilitate inquiries for information. Basic terms and features of this product are provided in Figure 1. Size 16 Pin Contact Size 16 Socket Contact Insulation Barrel Insulation Barrel Retention Shoulder Retention Shoulder Wire Barrel Wire Barrel Mating End Protective Sleeve Size 16 Pin Reel Payoff Size 16 Socket Reel Payoff TE Logo 4X Flat Optional 4X Flat Optional 607 24.00 607 24.00 30.18 1.188 30.18 1.188 Part Number Part Number 29.97 1.180 29.97 1.180 Label Label Figure 1 2021 TE Connectivity family of companies PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. 1 of 14 All Rights Reserved For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 114-151000 2. REFERENCE MATERIAL 2.1. Revision Summary See section 8 2.2. Customer Assistance Product Base Part Numbers (listed below) and Product Code J836 are representative of DEUTSCH size 16 S&F pin and socket contacts. Use of these numbers will identify the product line and help you to obtain product and tooling information. Such information can be obtained by visiting our website at www.te.com or calling the number at the bottom of this page. Pin: 1060-14-01 1060-14-10 1060-16-01 1060-16-06 1060-16-07 1060-16-09 Socket: 1062-14-01 1062-14-10 1062-16-01 1062-16-06 1062-16-07 1062-16-09 2.3. Drawings Customer drawings for product part numbers are available from www.te.com. The information contained in the customer drawings takes priority. 2.4. Instructional Material Instructional material that pertains to this product are: 402-1002 Interpretation of Cross-Sections for F-Crimp 408-3295 Preparing Reel of Contacts for Application Tooling 408-7424 Checking Terminal Crimp Height and Gaging the Die Closure 408-8059 Suggested Preventative Maintenance Schedule for Applicators 408-9816 Handling of Reeled Product 408-10389 Ocean Side-Feed Applicators 408-151007 DEUTSCH Extraction Tools for Rear-Release Connectors 408-151008 DEUTSCH Removal Tool DT-RT1 for Front-Release Connectors 409-5128 Basic AMP-O-LECTRIC* Model K Terminating Machines 471273- 409-5207 Model T Terminating Units 694620- 409-5289 Model T Terminating Unit 458000-4 409-5842 AMP-O-LECTRIC Model G Terminating Machines 354500- 409-10047 AMP 3K* Terminating Machines 1725950- and AMP 5K* Terminating Machines 1725900- 409-10099 AMP 3K/40* Terminating Machines 2116983- and AMP 5K/40* Terminating Machines 2116984- 114-18022-10 Making and Evaluation of Cross Sections for F-Crimp Termination 0425-031-0000 Applicator DCT 16-02-00 0425-037-0000 Hand Crimping Tool DTT-16-00 0425-038-0000 Hand Crimping Tool DTT-16-01 0425-060-0000 Applicator DCT1620-02-00 2.5. Global Standards and Publications DIN 72551-6, Road VehiclesLow-Tension CablesPart 6: Single-Core, Unscreened with Thin Insulation Wall Dimensions, Materials, Marking ISO 6722, Road Vehicles60 V and 600 V Single-Core CablesDimensions, Test Methods, and Requirements SAE J1128, Low Voltage Primary Cable 2 of 14 Rev L