1-1393130-4 TE Connectivity

General Purpose Relays Industrial Relays Potter & Brumfield PRD Series Power Relay n Contact ratings to 50 amps n Magnetic blowouts available for switching DC loads n Contact arrangement up to 2 form C (2CO) n 1 Form C auxiliary switch available n UL class B insulation Typical applications Industrial controls, lighting Approvals Contact ratings (continued) UL E22575 CSA LR15734 VDE Reg.Nr.C144 Type Load Cycles 1) Models with all screw terminals are UL Listed. Others are UL Recognized. UL 508 Technical data of approved types on request Models with screws or quick connects for main terminals Code F, AgCdO, 1 pole 2) 3 Contact Data 50A, 240VAC, general purpose 20x10 3 Contact arrangement 1 and 2 Form A (NO) 1 and 2 Form C (CO) 30A, 277VAC, resistive 100x10 3 1 Form X (NO-DM) 1.5HP, 120VAC 100x10 3 Rated voltage 600VAC,125VDC 2HP, 250VAC 100x10 3 Rated current 50A 10A, 600VAC 100x10 Contact material Ag, AgCdO, W Code F, AgCdO, 2 pole 2) 3 Min. recommended contact load 1A, 12VDC or 12VAC 50A, 240VAC, general purpose 20x10 3 Initial contact resistance 75m Max 30A, 240VAC 100x10 3 Initial voltage drop 75mV 20A, 277VAC 100x10 3 Frequency of operation 7200 ops/hr 1.5HP, 120VAC 100x10 3 Operate/releases time max. 40/20ms 2HP, 250VAC 100x10 3 Bounce time max. 10ms 10A, 600VAC 100x10 2) In order to achieve 50A rating with Contact Code F, Termination Code 0 or A is required. Contact ratings Type Load Cycles Code H, Ag with magnetic blowout, 1 or 2 pole 1) 3 UL 508 20A, 125VDC 100x10 3 Models with screws or quick connects for main terminals 1/3HP, 125VDC 100x10 Code Y, Ag, 1 pole Code J, AgCdO with magnetic blowout, 1 or 2 pole 3 3 25A, 277VAC 100x10 20A, 125VDC 100x10 3 3 1HP, 120VAC 100x10 1/3HP, 125VDC 100x10 3 2HP, 250VAC 100x10 Code N, W stationary with AgCdO movable, 1 or 2 pole 3 3 10A, 600VAC 100x10 25A, 250VAC 100x10 3 3 7A, 50VDC, resistive 100x10 1HP, 125VAC 100x10 3 Code Y, Ag, 2 pole 2HP, 250VAC 100x10 3 1) 25A, 240VAC 100x10 UL 508 3 20A, 277VAC 100x10 Models with box lugs for main terminals 3 1HP, 120VAC 100x10 Code P, Ag, 1 form X 3 3 2HP, 250VAC 100x10 50A, 277VAC, general purpose 100x10 3 3 7A, 50VDC, resistive 100x10 30A, 277VAC, ballast 6x10 3 3 10A, 600VAC 100x10 15A, 277VAC, tungsten 6x10 3 Code G, AgCdO, 1 pole 102LRA, 17FLA, 240VAC 30x10 3 3 30A, 277VAC, resistive 100x10 120LRA, 20FLA, 120VAC 30x10 3 3 1.5HP, 120VAC 100x10 1.5HP, 120VAC 30x10 3 3 2HP, 250VAC 100x10 3HP, 240VAC 30x10 3 10A, 600VAC 100x10 Factory ratings Code G, AgCdO, 2 pole Models with box lugs for main terminals 3 30A, 240VAC 100x10 Code R, Ag with magnetic blowout, 1 form X 3 3 20A, 277VAC 100x10 60A, 28VDC, resistive 100x10 3 3 1.5HP, 120VAC 100x10 30A, 125VDC 100x10 3 2HP, 250VAC 100x10 3 6 5 10A, 600VAC 100x10 Mechanical endurance DC Coil, 1x10 ops. AC Coil 5x10 ops. 1) Any PRD relay deviating electrically or physically from the standard models in the table is not UL or CSA listed. All horsepower ratings are for single phase motors.. Auxiliary Snap-Action Switch Contact Data Contact arrangement 1 Form C (CO) Rating 5A, 120VAC, 60 Hz., 25C Contact material Ag 1 08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Industrial Relays Potter & Brumfield PRD Series Power Relay (Continued) Coil Data Insulation Data Coil voltage range 6 to 110VDC Initial dielectric strength 6 to 480VAC between open contacts 2000V rms Coil insulation system according UL Class B between contact and coil 2000V rms Coil versions, DC coil between adjacent contacts 2000V rms Coil Rated Operate Release Coil Rated coil Initial insulation resistance code voltage voltage voltage resistance power between insulated elements 100M VDC VDC VDC 10% W 6 6 4.5 0.6 18 2 12 12 9 1.2 71 2 Other Data 24 24 18 2.4 288 2 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 48 48 36 4.8 1150 2 refer to the Product Compliance Support Center at 110 110 82.5 11 6050 2 www.te.com/customersupport/rohssupportcenter All figures are given for coil without preenergization, at ambient temperature +23C. Ambient temperature Other coil voltages on request. AC coil: -55C to 45C DC coil: -55C to 80C Coil versions, AC coil Category of environmental protection Coil Rated Operate Release Coil Rated coil IEC 61810 RT0 - open relay code voltage voltage voltage resistance power Terminal type Screw, Quick connects, Box lugs VAC VAC VAC 15% VA Weight 284g 6 6 5.1 0.6 0.86 9.8 Packaging/unit tray/20 pcs., box/40pcs. 12 12 10.2 1.2 3.2 9.8 24 24 20.4 2.4 12 9.8 120 120 102 12 290 9.8 Accessories 240 240 204 24 1200 9.8 480 480 408 48 4500 9.8 Product Code Description All figures are given for coil without preenergization, at ambient temperature +23C. 35D013 Metal dust cover Other coil voltages on request. Dimensions PRD/PRDA 1, 3, 5 and 7 PRD/PRDA 11 PRD-3 P and R 2 MTG. HOLES DIA. 2.5 MAX875 MAX875 MAX31 .31 3.375 MAX31 .187 + .005 (63.3) (22.23) (22.23) (7.9) .003 (7.9) (85.73) (7.9) .81 1.687 4.75 + .13 (42.85) (20.6) ( ) .08 4 2 4 2 2 6 6 6 8 2.51 MAX. 2.50 2.51 MAX. (63.5) (63.75) (63.8) COIL COIL BOX LUG COIL 1.875 1.875 1.875 (47.63) CONNECTOR (47.63) 7 (47.63) 5 5 3 1 1 3 5 1 2 MTG. HOLES .81 2 MTG. HOLES DIA. (20.6) DIA187 + .005 .59 MAX. 2.5 MAX187 + .005 .003 (15.0) (64) .003 4.75 + .13 ( ) 4.75 + .13 .08 ( ) .08 2.28 MAX. (57.9) 2.50 MAX. 2.50 MAX.ON PRD7 2.28 MAX. (63.5) (57.9) (63.5) .375 (9.53) 2.23 3.00 (56.6) (76.2) .375 3.375 .375 4.250 MAX. (9.53) (9.53) (85.73) (107.95) 3.375 MAX. 2.5 MAX. W/O AUX SWITCH W/O AUX SWITCH (85.73) (63.5) 2 08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company