General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 n 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact n DC or AC coil n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85C (DC coil) n WG version: product in accordance to IEC 60335-1 n Reflow version: for THR (Through-Hole Reflow) soldering process Typical applications F0144-C Boiler control, timers, garage door control, POS automation, interface modules Zb EN60947-5-1 Approvals RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13 6.050 VDE Cert. No. 40007571, cULus E214025, cCSAus 1142018 EN60730-1 CQC in preparation 3 RT314 DC-coil A (NO) 12(2)A, 250VAC, 85C 100x10 Technical data of approved types on request 1) For reflow solderable versions: actual contact performance may be influenced by the reflow soldering process. Contact Data 12A 16A Contact arrangement 1 form C (CO) or 1 form A (NO) Rated voltage 250VAC Contact Data (continued) Max. switching voltage 400VAC Mechanical endurance 6 Rated current 12A 16A DC coil >30x10 operations 6 Limiting continuous current 12A 16A, UL: 20A AC coil >10x10 operations 6 Limiting making current AC coil, reflow version >5x10 operations max. 4s, duty factor 10% 25A 30A Breaking capacity max. 3000VA 4000VA Contact material AgNi 90/10, AgNi 90/10 gold plated Coil Data Frequency of operation, with/without load Coil voltage range, DC coil/ AC coil 5 to 110VDC / 24 to 230VAC -1 DC coil 360/72000h Operative range, IEC 61810 2 -1 AC coil 360/36000h Coil insulation system according UL class F Operate/release time max., DC coil 8/6ms Bounce time max., DC coil, form A/form B 4/6ms Coil versions, DC coil 1) Electrical endurance see electrical endurance graph Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power Contact ratings 2) VDC VDC VDC 10% mW Type Contact Load Cycles 005 5 3.5 0.5 62 403 IEC 61810 3 006 6 4.2 0.6 90 400 RT314 DC-coil A (NO) 16A, 250VAC, cos=1, 85C 30x10 3 009 9 6.3 0.9 200 400 RT314 DC-coil C (CO) 16A, 250VAC, cos=1, 85C 10x10 3 012 12 8.4 1.2 360 400 RT314 DC-coil A (NO) 10A, 400VAC, cos=1, 85C 150x10 3 018 18 12.6 1.8 770 420 RT114 DC-coil A (NO) 12A, 250VAC, cos=1, 85C 50x10 3 020 20 14.0 2.0 952 420 RT114 AC-coil A (NO) 12A, 250VAC, cos=1, 70C 100x10 024 24 16.8 2.4 1440 400 UL 508 3 048 48 33.6 4.8 5520 417 RT314 A/B (NO/NC) 20A, 250VAC, general purpose, 85C 6x10 3 2) 060 60 42.0 6.0 8570 420 RT334 A (NO) 16A, 250VAC, gen. purpose, 85C 50x10 3 2) 110 110 77.0 11.0 28800 420 RT314 A (NO) 1hp, 240VAC, 40C 1x10 3 2) Coil resistance 12%. RT314 A (NO) FLA/LRA, 4.5/13.1A, 480VAC, 70C 100x10 All figures are given for coil without pre-energization, at ambient temperature +23C. EN60947-4-1 Other coil voltages on request. RT314 DC-coil A (NO) 250V/6A, AC-3 6.050 RT314 AC-coil A (NO) 250V/2A, AC-3 6.050 Coil versions, AC coil 50/60 Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 3) VAC VAC VAC 15% VA 3) 524 24 18.0 3.6 350 0.76 615 115 86.3 17.3 8100 0.76 620 120 90.0 18.0 8800 0.75 700 200 150.0 30.0 24350 0.76 730 230 172.5 34.5 32500 0.74 3) Coil resistance 10%. All figures are given for coil without pre-energization, at ambient temperature +23C, 50 Hz. Other coil voltages on request. 1 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RT1 (Continued) Other Data (continued) Terminal type standard version PCB-THT, plug-in reflow version PCB-THR Mounting distance AC coil: 2.5mm Weight 14g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270C/10s RTIII 260C/5s Resistance to soldering heat THR 4) reflow soldering (for reflow version) forced gas convection or 5) vapour phase temperature profile according EN61730 Packaging/unit tube/20 pcs., box/500 pcs. Insulation Data 4) infrared heating not allowed Initial dielectric strength 5) recommended fluid LS/230 between open contacts 1000V rms between contact and coil 5000V rms Clearance/creepage Accessories between contact and coil 10/10mm For details see datasheet Accessories Industrial Power Relay R T Material group of insulation parts IIIa NOTE: indicated contact ratings and electrical endurance data for direct Tracking index of relay base PTI 250V wiring of relays (according IEC 61810-1) for relays mounted on sockets reflow version PTI 175V deratings may apply. Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version or Reflow version according EN60335, par30 Ambient temperature DC coil -40 to 85C AC coil -40 to 70C Category of environmental protection, IEC 61810 standard version RTII - flux proof, RTIII - wash tight reflow version RTII - flux proof Vibration resistance (functional) form A/form B contact, 30 to 500Hz 20g/5g Shock resistance (destructive) 100g PCB layout / terminal assignment *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. Bottom view on solder pins 12A, pinning 3.5 mm 12A, pinning 5 mm 16A, pinning 5 mm S0418-CB S0418-CN S0418-CA 1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact S0163-BG S0163-BC S0163-BE 1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact S0163-BH S0163-BD S0163-BF 2 10-2018, Rev. 1018 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2014 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company