Automotive Relays PCB Double Relays Double Mini Relay DMR Q Limiting continuous current 30 A Q Easiest PCB routing among all PCB relays Typical applications Car alarm, door control, door lock, immobilizer, seat control, sun roof, window lifter, wiper control. F084 fcw2c bw Contact Data Coil Data Contact arrangement 2 form C, 2 CO Coil voltage range -40 to +85C Rated voltage 12VDC Rated coil voltage 12VDC Rated current both motor both motor 1)2) 1)2) systems reverse systems reverse Coil versions, DC coil 20/20A 30/30A 18/18A 30/30A Coil Rated Operate Release Coil Rated coil Limiting continuous current code voltage voltage voltage resistance power 2) 2) at 23C 20/20A 30/30A 18/18A 30/30A VDC VDC VDC 10% mW at 85C 15/15A 30/30A 12/12A 30/30A 001 12 6.9 1.0 255 565 1) Limiting making current 35A 35A 35A 35A 002 12 5.8 0.8 178 809 1) All gures are given for coil without pre-energization, at ambient temperature +23C. Limiting breaking current 35A 35A 35A 35A Contact material AgNi0.15 AgNi0.15 AgSnO AgSnO 2 2 3) Min. recommended contact load 1A at 5VDC Coil operating range Initial voltage drop at 10A, typ./max. 30/300mV ECR2225-B 4) Operate/release time max. at nominal voltage typ. 3 /1.3ms 40 coil/001 Electrical endurance Coil 001 35 at cyclic temperature -40/+23/+85C and 13.5VDC, both systems AgNi0.15, motor reverse blocked, 5 30 25A, 0.77mH inductive >10 ops. 5 AgSnO , lamp load, 45A (on), 8A (off), 80C >2x10 ops. 2 5 25 AgSnO , resistive load, 20A, 80C >2x10 ops. 2 7 Does not take into account Mechanical endurance >10 operations the temperature rise due to 20 1) The values apply to a resistive or inductive load with suitable spark suppression and at the contact current maximum 13.5VDC for 12VDC load voltages. E = pre-energization 2) At 50% ON period: max. make time 15s. 15 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at Automotive Relays PCB Double Relays Double Mini Relay DMR (Continued) Insulation Data Terminal assignment Initial dielectric strength Bottom view on solder pins between open contacts 500VAC rms between contact and coil 500VAC 2 form C contacts, 2 CO rms 25 15 14 24 Other Data EU RoHS/ELV compliance compliant 23 13 Ambient temperature -40 to 85C Cold storage, IEC 60068-2-1 1000h -40C 22 12 11 Dry heat. IEC 60068-2-2 1000h +125C 21 Temperature cycling (shock) IEC 60068-2-14, Na 1000 cycles -40/+125C Temperature cycling TE1651-J2 IEC 60068-2-14, Nb 35 cycles -40/+125C Damp heat cyclic PCB layout IEC 60068-2-30, Db, Variant 1 6 cycles 25C/55C/93%RH Bottom view on solder pins Damp heat constant 3.75 0.1 5) IEC 60068-2-3, Ca 56 days 40C/95%RH 1.25 Category of environmental protection IEC 61810 RT III - immersion cleanable Sealing test 24 25 14 15 5 0.1 IEC 60068-2-17 Qc, method 2, 1min, 70C 13 23 Vibration resistance (functional) 13.75 0.2 6) IEC 60068-2-6 (sine sweep) 10 to 200Hz 6to 30g 12 22 2.5 0.1 21 11 Shock resistance (functional) 2.2 0.2 6) IEC 60068-2-27 (half sine) 6ms 30g Shock resistance (destructive) 2.8 0.2 IEC 60068-2-29 (half sine) 30g: 6ms, 105 shocks 100g: 2ms, 10 shocks TE1652-S3 11.25 0.2 Terminal type PCB Weight approx. 10g (0.35oz) Solderability (aging 3: 4h/155C) IEC 60068-2-20 Ta, method 1, hot dip 5s, 215C Resistance to soldering heat THT IEC 60068-2-20 Tb, method 1A, hot dip 10s, 260C with thermal screen Packaging unit 600 pcs. 5) Relays have to be dried at 85C for 24 hours after test. 6) depending on mounting position: no change in the switching state >10s. Dimensions 5.15 1.15 5.6 16.8 0.2 17.5 0.1 1.6 13.2 0.2 *) 3.2 0.2 0.43 0.04 0.92 0.07 0.54 0.04 0.5 0.1 0.43 0.04 0.92 0.07 Terminals tinned *) Additional tin tops max. 1mm *) additional tin tops max. 1 mm TE1650-B3 2 09-2010, Rev. 0910 Datasheets and product specication ac- Datasheets and product data is subject to the Datasheets, product data, Denitions sec- cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specications www.tycoelectronics.com together with the Denitions section. the Denitions section, available at are subject to change. 2010 Tyco Electronics Ltd.