1-1414995-0 TE Connectivity

Automotive Relays High Current Devices High Current Relay 200 Normally closed contact Limiting continuous current 175A at 85C Typical applications Energy management, battery coupling, start/stop. F230 fcw5b Contact Data Insulation Data Contact arrangement 1 form B, 1 NC Initial dielectric strength Rated voltage 12VDC between open contacts 500VDC A) Max. switching voltage depends on load parameter set between contact and coil 500VDC 2 Rated current, cable 50mm 175A at 85C Load dump test Limiting continuous current ISO 7637-1 (12VDC), test pulse 5 no switching allowed during load dump 2 23C, load cable 35mm 245A ISO 7637-2 (24VDC), test pulse 5 no switching allowed during load dump 2 85C, load cable 35mm 165A 2 110C, load cable 35mm 120A 2 23C, load cable 50mm 255A Other Data 2 85C, load cable 50mm 175A EU RoHS/ELV compliance compliant 2 110C, load cable 50mm 130A Ambient temperature -40C to +110C Limiting making current 200A at <5VDC Climatic cycling with condensation, Limiting breaking current 200A at <5VDC IEC 60068-2-38 240h (-10 to +65C), 93% RH A) Limiting short-time current depends on load parameter set Temperature cycling (shock), Contact material AgSnO IEC 60068-2-14, Na 100 cycles (-40 to +110C), 2 Contact style single contact dwell time 50min, transfer time <30s Min. recommended contact load 1A at 5V Degree of protection Initial voltage drop 100mV at 100A splash water proof: IP64 (IEC 60529), RT III (IEC 61810) 1) Operate/release time typ. at nominal voltage 25/35ms Corrosive gas 5 1%NaCl, 96h, 35C 2) Bounce time max. Vibration resistance (functional), Electrical endurance IEC 60068-2-64 (random) 10 to 2000Hz, min. 5g effective 50A (on), 30A (cont.), 50A (off): 48000 cycles Shock resistance (functional), 80A (on), 30A (cont.), 120A (off): 1000 cycles IEC 60068-2-27 (half sine) 11ms min. 30g 200A (on), 120A (cont.), 120A (off): 1000 cycles Drop test, free fall 1m onto concrete 3) repeated until 800000 cycles are reached Terminal type connector, screw 7 Mechanical endurance >10 ops. Weight approx. 230g (8.1oz) 1) With diode in parallel. Packaging unit on request 2) Release and bounce time depend on component in parallel to the coil, please contact application engineering support. 3) Validated with a load voltage of 5VDC. A) Please contact TE relay application engineering. Coil Data Rated coil voltage 12VDC 1) Max. coil power 3.3W Max. coil temperature 155C 1) With diode in parallel. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC 10% W 1001 12 7.2 1.2 37 3.9 2001 12 7.2 1.2 43 3.3 All figures are given for coil without pre-energization, at ambient temperature +23C. 1 12-2017, Rev. 1217 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications 2017 TE Connectivity. together with the Definitions section. the Definitions section, available at are subject to change. Automotive Relays High Current Devices High Current Relay 200 (Continued) Terminal Assignment NCD NCR 1 form B, NC with diode 1 form B, NC with resistor 2 B 2 B 1 A 1 A Dimensions View of the terminals (bottom view) 1) Connector AMP MCPI.2, 2pos. keying B, appropriate for TE part no. 2-1670916-1 2) Permitted torque: 16.5 Nm max. 3) LabelIing with following information: - TE logo and part number - Nominal voltage - Date code (Day-Month-Year) - Circuit diagram 4) Seating area on leadframe 5) Seating area in fusebox 6) Contact area for cable lugs. Recommended cable lug: 50mm Tolerances unless otherwise specified: ISO 8015, ISO 2768-vL Mounting 230 DD3 2 12-2017, Rev. 1217 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications 2017 TE Connectivity. together with the Definitions section. the Definitions section, available at are subject to change.