1-1618113-1 TE Connectivity

1 3 /2 3.0 7 3 /8 Voltage Sensitive Relays WILMAR Protective Relays WUV/WOV Series Function: 27/59 ANSI/IEEE C37.90-1978 UL file No. E58048 CSA file No. LR61158 TERMINAL STRIPS 6 - 32 SCREWS Voltage sensitive relays are available for both AC and DC applications for over/undervoltage protection. Combination over/undervoltage relays provide bandpass capabilities. AC relays are either single or three-phase type. Three phase models are de- signed to sense the average of the three phases or the highest single phase. Voltage trip points are screwdriver adjustable, and operation is time-de- layed so that momentary voltage transients will not cause nuisance tripping. Typical Time Curve 40.0 30.0 Overvoltage Relays WOV Series 20.0 10.0 0.0 -10.0 Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm. 0 0.05 0.1 0.15 0.2 0.25 0.3 PART NUMBER SELECTION Pick-Up Time Delay PART NUMBER SELECTION Single Sample Part No. WUV-1-120 Three Phase Phase Type: WUV - Undervoltage WOV - Overvoltage No. Phases 1 = Single 3 = Three PRODUCT SPECIFICATIONS Line Voltage VAC Part Number WUV/WOV 120 416 Nominal Voltage ............................... 208 440 120 VAC to 575 VAC 220 460 Phase ................................................ Single or Three 230 480 Line Frequency ................................. 50-400 Hz 240 525 380 575 Pick-up to Drop-out Differential...... 2.5% maximum Options Drop-out Point (u/v models) ........... 70-100% of nominal voltage, screwdriver adjustable P - Transient Protection A - Two Normally Open Contacts Pick-Up Point (o/v models) ............. 100-125% of nominal voltage, screwdriver adjustable B - Two Normally Closed Contacts Output Contacts ............................... One set N.O., One set N.C. H - 125VDC, 3A Contacts Contact Ratings ................................ 5 amp resistive at 120 VAC or 28 VDC Transient Protection - All voltage relays will withstand Operating Temperature Range ........ -20C to +65C momentary voltage surges of twice the nominal rated Power Consumption ........................ input voltage (standard). 2 VA maximum Time Delay........................................ 150-300 ms (UV Model) Option provides additional transient protection Minimum Life ................................... which complies with the requirements of ANSI/IEEE 500,000 operations C37.90-1978 Notes: 1. Remove black screw for access to the voltage trip adjustment. Consult factory for additional models. 2. Clockwise rotation of the adjustment potentiometer will raise the voltage trip point. 20 Tyco Electronics / www.tycoelectronics.com / Factory Direct Technical Support: 800-253-4560, ext. 2023 (U.S., Canada, Mexico) or 805-220-2020, ext. 2023 (International) 11 /64 DIA. 4 MTG. HOLES 3.0 3 2 /4 1 3 /2