Quick Reference Guide
RJ point five Connector System
The RJ point five connector system is the next generation Ethernet link, offering a higher
density cabling solution for Original Equipment Manufacturers (OEMs) who desire a lower cost
per port while maintaining the convenience of a single connector per channel. The port spacing
is on a 7mm centerline, occupying half the space than that of traditional RJ45 Ethernet link.
In addition to the high density receptacle, Tyco Electronics offers the mating cable assembly,
as well as cable management solutions for single box and rack configurations. The receptacle
and cable assembly were redesigned to eliminate the undesirable RJ45 split pair configuration,
resulting in heightened electrical performance. Additionally, the latching feature incorporates an
easy-to-use lanyard that will facilitate up to 96 ports on a single line card. Due to the density on
the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing
the port indicator light closer to the end user.
FEATURES AND BENEFITS
Approximately double the density offered Product family will support Gigabit speeds of
over the standard RJ45 Ethernet link Cat5e UTP cable, and roadmap supports PoE+
Same footprint to support both integrated and 10Gig over Cat6a
magnetic and non-integrated solutions Receptacle is a modular design to allow for easy
Cable assemblies capable of field termination and rapid deployment of product extensions
Cable management features available from Tyco
Electronics for higher density configurations
www.tycoelectronics.com/products/rjpointfiveRJ point five Connector System
Product Applications Mechanical
High density Ethenet switching/routing products
Port center-on-center spacing at 7mm for Cat5e cabling
Data center switching applications:
Overall height is 25.25mm
Top of rack
High density cabling consists of ergonomically friendly
End of row
lanyard for easy extraction
Mid-row
Port indicator LEDs conveniently located on the cable
Server I/O applications
boot to facilitate easy viewing
Wiring closet switching products
Electrical/Optical
Product meets category 5e performance for Magnetic product performs for
10/100/1000BASE-T applications 10/100/1000BASE-T applications
Insertion loss 0.4 dB maximum at 100 MHz Insertion loss 1.5 dB maximum at 100 MHz
Return loss 20 dB minimum at 100 MHz Return loss 10 dB minimum at 100 MHz
NEXT loss 43 dB minimum at 100 MHz Crosstalk 31 dB minimum at 100 MHz
FEXT loss 35.1 dB minimum at 100 MHz Common Mode Rejection Ratio 17 dB minimum at 100 MHz
Isolation voltage complies with IEEE 802.3
RJ point five Connector Comparison to RJ45*
*Drawing not shown to scale
58.5 MM
115.06 mm
RJ Point Five Connector
RJ45
RJ point five Board Mount Receptacles and Plug Kit
Part Number Description Integrated Magnetics LEDs
Customer Drawings Product Available
2007669-1 2x8 Receptacle Yes Yes (R/G) Yes Yes
2007669-2 2x8 Receptacle Yes Yes (Y/G) Yes Yes
2057133-1 2x8 Receptacle No Yes (R/G) Yes Yes
2057133-2 2x8 Receptacle No Yes (Y/G) Yes Yes
2007311-1 2x6 Receptacle Yes Yes (R/G) Yes No
2007311-2 2x6 Receptacle Yes Yes (Y/G) Yes No
2057132-1 2x6 Receptacle No Yes (R/G) Yes No
2057132-2 2x6 Receptacle No Yes (Y/G) Yes No
2057004-1 2x12 Receptacle Yes Yes (R/G) Yes Yes
2057004-2 2x12 Receptacle Yes Yes (Y/G) Yes Yes
2057134-1 2x12 Receptacle No Yes (R/G) Yes Yes
2057134-2 2x12 Receptacle No Yes (Y/G) Yes Yes
2057014-1 2x1 Receptacle Yes Yes (R/G) Yes No
2057014-2 2x1 Receptacle Yes Yes (Y/G) Yes No
2057131-1 2x1 Receptacle No Yes (R/G) Yes No
2057131-2 2x1 Receptacle No Yes (R/G) Yes No
2007312-1 Plug Kit -- -- Yes Yes
www.tycoelectronics.com/products/rjpointfive
RJ point five Connector System I Tyco Electronics