General Purpose Relays
Force Guided Relays
SCHRACK
Force Guided Relay SR2M
n
2 pole relay with force guided contacts according to EN 50205
n
Reinforced insulation between poles
n
Version P1 for use in sockets
F0188-D
Typical applications
Emergency shut-off, press control, machine control, elevator and escalator
control, safety relays
ZT
Approvals Coil Data (continued)
VDE 116064, UL E214025, TUV 968/EZ 111, CCC 2014010305743065
Technical data of approved types on request Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
Contact Data code voltage voltage voltage resistance power
1)
Contact arrangement 1 form A + 1 form B contacts VDC VDC VDC 10% mW
(1 NO + 1 NC) or 005 5 3.8 0.5 35.7 700
2 form C contacts (2 CO) 006 6 4.5 0.6 51 706
According EN50205 only 1NO / 1NC (11-14 and 22-21 or 12-11 and 009 9 6.8 0.9 116 698
21-24) shall be used as force guided contacts. 012 12 9 1.2 206 699
Rated voltage 250VAC 015 15 11.3 1.5 321 701
Max. switching voltage 400VAC 018 18 13.5 1.8 483 671
Rated current 6A 021 21 16 2.1 630 700
Contact material AgNi 024 24 18 2.4 823 700
Contact style single contact, force guided 036 36 27 3.6 1851 700
1 form A + B, 1 NO + 1NC type A according to EN 50205 040 40 30 4.0 2286 700
1)
2 form C, 2CO type B according to EN 50205 048 48 36 4.8 3291 700
1)
Min. recommended contact load 5V/10mA 060 60 45 6 5142 700
1)
Initial contact resistance 100m at 1A, 24VDC 080 80 60 8 9143 700
1)
20 at 10mA, 5VDC 110 110 83 11 17285 700
-1 1)
Frequency of operation, with/without load 6/300min Coil resistance 12%.
All figures are given for coil without pre-energization, at ambient temperature +23C.
Contact ratings, IEC60947-5-1,
on 1 form A (NO) contact AC15 - 250V/3A
DC13 - 24V/3A
on the basis of DC13 - 24V/6A
under conditions specified in
product spec. 2158001
6
Mechanical endurance 10x10 operations
Insulation
Initial dielectric strength
between open contacts 1500V
rms
between contact and coil 4000V
rms
Coil Data between adjacent contacts 3000V
rms
Coil voltage range 5 to 110VDC Clearance/creepage
between open contacts microdisconnection
between contact and coil 8/8mm
between adjacent contacts 5.5/5.5mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts reinforced
1
11-2016, Rev. 1116 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company General Purpose Relays
Force Guided Relays
SCHRACK
Force Guided Relay SR2M (Continued)
Other Data SR2M SR2M Plug-in PCB layout / terminal assignment
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to 70C 2 form C, 2 CO contacts
Category of environmental Protection
IEC 61 810 RTIII RTII
Weight 20g
Resistance to soldering heat THT
IEC 60068-2-20 260C/5s -
Packaging/unit tube/20 pcs.
For more detailed information see product specification 2158001
S0163-CO
Accessories
For details see datasheet Accessories Force Guided Relay SR2M plugin
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
S0163-BJ
Dimensions
1 form A + 1 form B contacts, 1 NO + 1 NC
SR2M
S0163_CU
S0273-BB
SR2M Plug-In S0163-CV
2
11-2016, Rev. 1116 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company