Signal Relays AXICOM D2n Relay V23105 n Standard DIL relay n Dimensions 20x10x11mm (.795x.394x.433) n Switching and continous current 3A n 2 form C contacts (2 CO, 2 changeover contacts) n Immersion cleanable n Four different coil sensitivities, 150mW, 200mW, 400mW, >500mW n Surge voltage resistance meets FCC Part 68 requirement: 1.5kV (10/700s) between coil and contacts Typical applications Communications equipment, office equipment, measurement and control equipment, entertainment electronics, medical equipment, consumer electronics Z Approvals Coil Data UL 508 File No. E 111441 Magnetic system neutral Technical data of approved types on request Coil voltage range 3 to 48VDC Max. coil temperature 85 C Contact Data Thermal resistance < 85K/W Contact arrangement 2 form C (CO) Max. switching voltage 220VDC, 250VAC Coil versions, monostable Rated current 3A Coil Rated Operate Limiting Release Coil Rated coil Limiting continuous current, 85C 3A code voltage voltage Voltage voltage resistance power Contact material AgNi, gold-covered VDC VDC VDC VDC 10% mW Min. recommended contact load 10mA at 20mV 150mW coil power Minimum switching voltage 100V 001 5 4.0 11.7 0.25 167 150 Initial contact resistance <100m at 10mA, 20mV 002 6 4.8 14.0 0.30 240 150 Frequency of operation without load max. 50 operations/s 006 9 7.2 21.0 0.45 540 150 Operate / release time max. 6ms/4ms 003 12 9.6 28.0 0.60 960 150 Bounce time max. 5 ms 005 24 19.2 56.0 1.20 3840 150 Electrical endurance 200mW coil power 5 at 230VAC/0.5A typ. 3x10 operations 308 3 2.1 6.1 0.15 45 200 6 at 6VDC/0.1A typ. 2x10 operations 301 5 3.5 10.1 0.25 125 200 5 at 30VDC/1A typ. 5x10 operations 302 6 4.2 12.2 0.30 180 200 5 at 30VDC/2A typ. 1x10 operations 306 9 6.3 18.2 0.45 405 200 Contact ratings, UL 30VDC/1.0A 303 12 8.4 24.3 0.60 720 200 100VDC/0.3A 305 24 16.8 48.6 1.20 2880 200 150mW and 200mW coil 125VAC/0.5A 307 48 33.6 97.2 2.40 11520 200 400mW and 500mW coil 125VAC/1.0A 400mW coil power 6 Mechanical endurance typ. 15x10 operations 401 5 3.5 7.2 0.25 62 400 402 6 4.2 8.6 0.30 90 400 406 9 6.3 12.9 0.42 203 400 403 12 8.4 17.2 0.60 360 400 405 24 16.8 34.3 1.20 1440 400 407 48 33.6 68.6 2.40 5760 400 >500mW coil power 501 5 3.5 6.1 0.25 36 695 502 6 4.2 7.3 0.30 70 515 506 9 6.3 10.9 0.45 140 580 503 12 8.4 14.5 0.60 280 515 505 24 16.8 29.1 1.20 1050 550 507 48 33.6 58.1 2.40 4000 575 All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company Signal Relays AXICOM AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay D2n Relay V23105 (Continued) Coil Operating Range Coil Data (continued) Coil Data (continued) Coil operative range graphs 3.0 3 200 mW coil 150 mW coil 150 mW U Nominal coil voltage 200 mW nom 2.8 2.8 U Upper limit of the operative range of the coil voltage (limiting max 2.6 2.6 voltage) when coils are continously energized Umax. at 0 A Umax. at 0 A 2.4 2.4 U Lower limit of the operative range of Umax. at 2 x 1 A op. min. Umax. at 2 x 1 A 2.2 2.2 the coil voltage (reliable operate voltage) Umax. at 2 x 2 A Umax. at 2 x 2 A 2.0 2 U Lower limit of the operative range of rel. min. the coil voltage (reliable release voltage) 1.8 1.8 1.6 1.6 1.4 AXICOM 1.4 Telecom-, Signal and RF Relays Insulation Data 108-98007 Rev A 1.2 1.2 AXICOM Initial dielectric strength Telecom-, Signal and RF Relays 1.0 Unom. nominal coil voltage 108-98007 Rev A 1 Unom. nominal coil voltage D2n V23105 Relay between open contacts 750V rms 0.8 0.8 D2n V23105 Relay between contact and coil 1050V rms 0.6 Uop. min. 0.6 Uop. min. Urel. min. between adjacent contacts 750V rms 0.4 0.4 Urel. min. Coil Operating Range Initial surge withstand voltage 0.2 0.2 between open contacts 1500V Coil Operating Range 0.0 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 - 20 between contact and coil-10 0 10 20 30 40 50 60 70 80 90 100 11 0 120 1500V 3.0 3 Ambient Temperature C 150 mW coil Ambient Temperature C 200 mW coil 150 mW between adjacent contacts 200 mW 1500V 2.8 3.0 2.8 3 9 150 mW coil 200 mW coil Initial insulation resistance at 500 VDC > 10 150 mW 200 mW 2.6 2.8 2.6 2.8 3.0 3.0 Capacitance Umax. at 0 40A0 mW coil 550 mW coil Umax. at 0 A 2.4 400 mW 550 mW 2.6 2.4 2.6 2.8 Umax. at 2 x 1 A 2.8 Umax. at 2 x 1 A between open contacts max. 2pF Umax. at 0 A Umax. at 0 A 2.2 2.4 Umax. at 2 x 2 A 2.2 2.4 Umax. at 2 x 2 A 2.6 2.6 Umax. at 2 x 1 A Umax. at 2 x 1 A between contact and coil max. 4pF 2.0 Umax. at 0 A Umax. at 0 A 2.2 2 Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A 2.4 2.4 between adjacent contacts max. 2 pF Umax. at 2 x 1 A Umax. at 2 x 1 A 1.8 2.0 1.8 2 2.2 Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A 1.6 1.8 1.6 1.8 2.0 2.0 1.4 1.6 1.6 1.4 1.8 1.8 RF Data 1.2 1.4 AXICOM 1.2 1.4 1.6 1.6 Isolation at 100MHz/900MHz -39.0dB/-20.7dB Telecom-, Signal and RF Relays 108-98007 Rev A 1.0 Unom. nominal coil voltage 1.2 1 Unom. nominal coil voltage 1.2 1.4 1.4 Insertion loss at 100MHz/900MHz -0.02dB/-0.27dB 0.8 1.0 Unom. nominal coil voltage 1 Unom. nominal coil voltage 0.8 1.2 1.2 D2n V23105 Relay Voltage standing wave ratio (VSWR) 0.6 Uop. min. 0.8 0.6 0.8 1.0 Unom. 1.0 Unom. Uop. min. Urel. min. at 100MHz/900MHz 1.04/1.40 0.4 0.6 Uop. min. 0.6 0.4 0.8 0.8 Urel. min. Uop. min. Urel. min. 0.2 0.4 0.2 0.4 0.6 0.6 Urel. min. Coil Operating Range Uop. min. Uop. min. 0.0 0.2 0 0.2 0.4 0.4 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Urel. min. -30 -Other Data20 -10 0 10 20 30 40 50 60 70 80 90U1rel. min.00 110 120 0.0 0 0.2 0.2 Ambient Temperature C Ambient Temperature C -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 3.0 0.03 0.0 150 mW coil 200 mW coil Ambient Temperature C Ambient Temperature C refer to the Product Compliance Support Center at 150 mW 200 mW -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 2.8 2.8 3.0 3.0 Ambient Temperature C Ambient Temperature C www.te.com/customersupport/rohssupportcenter 400 mW coil 550 mW coil 400 mW 550 mW 2.6 2.6 2.8 2.8 3.0 3.0 Ambient temperature -40 to +85C Umax. at 0 40A0 mW coil Umax. at 0 A 550 mW coil 2.4 400 mW 2.4 550 mW Umax. at 2 x 1 A 2.6 2.6 2.8 2.8 Umax. at 2 x 1 A Category of environmental protection Umax. at 0 A 2.2 2.2 Umax. at 0 A Umax. at 2 x 2 A Umax. at 2 x 2 A 2.4 2.4 2.6 2.6 IEC 61810 RT III - immersion cleanable Umax. at 2 x 1 A Umax. at 2 x 1 A 2.0 Umax. at 0 A 2 Umax. at 0 A 2.2 2.2 2.4 2.4 Umax. at 2 x 2 A Degree of protection, IEC 60529Umax. at 2 x 2 A IP 67 Umax. at 2 x 1 A Umax. at 2 x 1 A 1.8 1.8 2.0 2.0 2.2 Umax. at 2 x 2 A 2.2 Vibration resistance (functional) 10g, 10 to 55Hz Umax. at 2 x 2 A 1.6 1.6 1.8 1.8 2.0 2.0 Shock resistance (functional) 1.4 1.4 U = Nominal coil voltage 1.6 nom1.6 1.8 1.8 IEC 60068-2-27 (half sine) 10g 1.2 1.2 1.4 1.4 1.6 1.6 Shock resistance (destructive) 50g Unom. nominal coil voltage U = Upper limit of the operative range of the coil voltage (limiting 1.0 1 Unom. nominal coil voltage max. 1.2 1.2 1.4 1.4 Terminal type PCB-THT 0.8 voltage) when coils are continously energized 0.8 1.0 Unom. 1.0 1.2 1.2 Unom. Weight max. 6g 0.6 Uop. min. 0.6 0.8 0.8 1.0 Unom. 1.0 Unom. Uop. min. U = Lower limit of the operative range ofResistance to soldering heat THT Urel. min. op. min. 0.4 0.4 0.6 Urel. min. 0.6 0.8 0.8 IEC 60068-2-20 265C/10s Uop. min. the coil voltage (reliable operate voltage) Uop. min. 0.2 0.2 0.4 0.4 0.6 0.6 Urel. min. Ultrasonic cleaning Urel. min. not recommended Uop. min. 0.0 Uop. min. 0 0.2 0.2 0.4 0.4 U = Lower limit of the operative range of -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 rel. min. Packaging unit 1000 pcs. Urel. min. -30 -20 -10 0 10 20 30 40 50 60 70 80 90U1rel. min.00 110 120 0.0 0.0 0.2 0.2 Ambient Temperature C Ambient Temperature C the coil voltage (reliable release voltage) -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 0.0 0.0 Ambient Temperature C Ambient Temperature C -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 3.0 3.0 Ambient Temperature C Ambient Temperature C 400 mW coil 550 mW coil 400 mW 550 mW All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12 2.8 2.8 Terminal assignment 2.6 2.6 TOP view on component side of PCB Umax. at 0 A Umax. at 0 A 2.4 2.4 Umax. at 2 x 1 A Umax. at 2 x 1 A 2.2 Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A 2.0 2.0 U = Nominal coil voltage 1.8 1.8 nom U = Nominal coil voltage 1.6 1.6 nom U = Upper limit of the operative range of the coil voltage (limiting max. 1.4 1.4 U = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized max. 1.2 1.2 voltage) when coils are continously energized 1.0 Unom. 1.0 Unom. PCB layout U = Lower limit of the operative range of op. min. 0.8 0.8 TOP view on component side of PCB U = Lower limit of the operative range of the coil voltage (reliable operate voltage) op. min. 0.6 0.6 Uop. min. the coil voltage (reliable operate voltage) Uop. min. 0.4 0.4 U = Lower limit of the operative range of rel. min. Urel. min. Urel. min. 0.2 0.2 U = Lower limit of the operative range of the coil voltage (reliable release voltage) rel. min. 0.0 0.0 the coil voltage (reliable release voltage) -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature C Ambient Temperature C All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12 All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 12 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company