General Purpose
Low Power PCB Relays
SCHRACK
Power PCB Relay RT1 Inrush Power
n
1 pole 16A, 1 form A (NO) contact (W pre-make contact + AgSnO )
2
n
165A/20ms inrush peak current
n
Mono- or bistable coil
n
5kV/10mm coil-contact
n
Reinforced insulation
n
Test tab (manual operator) optional
n
WG version: product in accordance to IEC60335-1
Typical applications
Lighting systems, movement sensors, filament and incandescent lamp
loads, motors.
Zb
Approvals Contact Data (continued)
Mechanical endurance
VDE Cert. No. 40007571,UL E214025, cCSAus 1142018
6 6
DC coil >5x10 ops. >10x10 ops.
Technical data of approved types on request.
6 6
bistable version >3x10 ops. >5x10 ops.
3
tab manually operated >1x10 ops. -
Contact Data RT.3T RTS3L
Contact arrangement 1 form A (NO) contact
Coil Data, monostable DC coil
Rated voltage 250VAC
Coil voltage range 5 to 110VDC
Max. switching voltage 400VAC
Operative range, IEC 61810 2
Rated current 16A
Coil insulation system according UL1446 class F
Limiting continuous current 16A, UL: 20A (RTS3L)
Limiting making current,
Coil versions, monostable DC coil
max. 20ms (incand. lamps) 165A 120A
Coil Rated Operate Release Coil Rated coil
Breaking capacity max. 4000VA
code voltage voltage voltage resistance power
Contact material W (pre-make cont.) AgSnO
2 1)
VDC VDC VDC 10% mW
+AgSnO
2
005 5 3.5 0.5 62 403
Contact style pre-make contact single contact
006 6 4.2 0.6 90 400
-1
Frequency of operation, with/without load 360/3600h
009 9 6.3 0.9 203 400
Operate/release time max., DC coil 10/5ms
012 12 8.4 1.2 360 400
Operate/Reset time max., bistable version 10/10ms
024 24 16.8 2.4 1440 400
Bounce time max. 4ms
048 48 33.6 4.8 5520 417
1)
060 60 42.0 6.0 8570 420
Contact ratings
1)
110 110 77.0 11.0 28800 420
Type Contact Load Cycles
1) Coil resistance 12%.
IEC 61810
All figures are given for coil without pre-energization, at ambient temperature +23C.
3
RTS3L A (NO) 20A, 250VAC resistive, 70C 20x10
Other coil voltages on request.
3
RTS3L monostable A (NO) 16A, 250VAC resistive, 85C 100x10
3
RTS3T A (NO) 16A, 250VAC resistive, 85C 5x10
UL 508
3
RTS3L A (NO) 20A, 250VAC, general purpose, 70C 20x10
3
RTS3L A (NO) 16A, 250VAC, resistive, 85C 50x10
3
RTS3L A (NO) TV8, 240VAC, 40C 25x10
3
RTS3L A (NO) 1.5hp, 240VAC, 70C 30x10
RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC,
3
60Hz, 50C 6x10
RTS3T A (NO) 620W Discharge lamps (standard ballast),
3
120VAC/277VAC, 60Hz, 50C 6x10
Coil Data, bistable coils 1 coil 2 coils
Magnetic system polarized, bistable
Coil voltage range 3 to 24VDC
Operative range, IEC 61810 2
Limiting voltage, % of rated coil voltage 120% 150%
Min./Max. energization duration 30ms/1min at <10% duty factor
Coil insulation system according UL1446 class F
1
07-2014, Rev. 0714 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change.
a TE Connectivity Ltd. company. General Purpose
Low Power PCB Relays
SCHRACK
Power PCB Relay RT1 Inrush Power (Continued)
Coil Data (continued) Other Data RT.3T RTS3L
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
Coil versions, bistable
refer to the Product Compliance Support Center at
Coil Rated Set Reset Coil Rated coil
www.te.com/customersupport/rohssupportcenter
code voltage voltage voltage resistance power
Ambient temperature
VDC VDC VDC 10% mW
monostable DC coil -40 to 85C
Coil versions, bistable 1 coil
bistable 1 coil -10 to 85C
A03 3 2.1 1.7 21 429
bistable 2 coils -40 to 85C
A12 12 8.4 6.6 360 400
Category of environmental protection
A24 24 16.8 13.2 1440 400
IEC 61810 RTII - flux proof
Coil versions, bistable 2 coils
Vibration resistance (functional),
F03 3 2.1 1.7 15 600
monostable version 10g 20g
F12 12 8.4 6.6 240 600
Shock resistance (destructive) 100g
F24 24 16.8 13.2 886 650
2)
All figures are given for coil without pre-energization, at ambient temperature +23C. Terminal type PCB-THT, plug-in
Other coil voltages on request. Weight, without / with test tab 14/16g 14g/-
Resistance to soldering heat THT
Bistable coils - operation IEC 60068-2-20 270C/10s
Version 1 coil 2 coils Packaging/unit
Coil terminals A1 A2 A1 A3 A2 without test tab tube/20 pcs., tube/20 pcs.,
Operate + - + - box/500 pcs. box/500 pcs.
Reset - + - + with test tab tray/25 pcs., -
Contact position not defined at delivery box/100 pcs. -
2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories.
Accessories RTS3.
For details see datasheet Accessories Industrial Power Relay R T
Socket available for 1 coil version only.
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
Insulation Data
Initial dielectric strength
between open contacts 1250V
rms
between contact and coil 5000V
rms
Clearance/creepage
between contact and coil 10/10mm
Material group of insulation parts IIIa
Tracking index of relay base PTI 250V
2
07-2014, Rev. 0714 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
2014 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change.
a TE Connectivity Ltd. company.