General Purpose Relays
Industrial Relays
Potter & Brumfield
KUIP/KUGP Series Panel Plug-in Relay
n
10 amp rated relays
n
2 Form A (NO) and 1-3 Form C (CO) contact arrangement
n
KUIP 8mm coil-to-contact spacing and KUGP 3mm contact gap
n
Various mounting and socket styles
Typical applications
Voltage control units
Approvals Coil versions, DC coil
UL E22575; CSA LR15734 Coil Rated Operate Coil Rated coil
Technical data of approved types on request code voltage voltage resistance power
VDC VDC 10% W
Contact Data KUIP
Contact arrangement 5 5 3.75 21 1.2
KUGP: 2 form A (NO); 3 form A (NO) 6 6 4.5 32.1 1.125
KUIP: 1 form C (CO), 2 form A (NO), 2 form C (CO), 3 form C (CO) 12 12 9.0 120 1.2
Rated voltage 240VAC 24 24 18.0 472 1.25
Rated current 10A 48 48 36.0 1800 1.3
Contact material Ag AgCdO 110 110 82.5 10000 1.25
Min recommended contact load 100mA, 12VDC 300mA, 12VDC KUGP
Frequency of operation 360 ops./hour 360 ops./hour 5 5 3.75 14 1.8
Operate/releases time max. 20/15ms 6 6 4.5 20 1.8
Bounce time max. 20ms 12 12 9.0 80 1.8
24 24 18.0 320 1.8
Contact ratings 48 48 36.0 1250 1.85
Type Load Cycles 110 110 82.5 6720 1.8
UL 508 All figures are given for coil without preenergization, at ambient temperature +23C.
Ag
5A, 240VAC Coil versions, AC coil
5A, 28VDC Coil Rated Operate Coil Rated coil
1/6HP, 120VAC code voltage voltage resistance power
2.5A, 120VAC, tungsten VAC VAC 15% VA
1/3HP, 240VAC KUIP 1 and 2 pole
0.5A, 120VDC 6 6 5.1 6 2.0
5FLA, 15LRA, 250VAC 12 12 10.2 24 2.0
AgCdO 24 24 20.4 85 2.0
10A, 240VAC 120 120 102.0 2250 2.1
10A, 32VDC 240 240 204.0 9110 2.1
5FLA, 15LRA, 250VAC KUIP 3 pole, KUGP
1/3HP, 120VAC 6 6 5.1 4.2 2.8
5A, 120VAC, tungsten 12 12 10.2 18 2.8
1/2HP, 250VAC 24 24 20.4 72 2.8
0.5A, 125VDC 120 120 102.0 1700 2.9
10FLA, 40LRA, 125VAC 240 240 204.0 7200 2.9
3A, 600VAC
All figures are given for coil without preenergization, at ambient temperature +23C.
1/2HP, 480VAC
1/2HP, 600VAC
1HP, 480VAC, 3 phase Insulation Data KUIP KUGP
6
Mechanical endurance 10x10 ops. Initial dielectric strength
between open contacts 1200V 3500V
rms rms
between contact and coil 2200V 3750V
rms rms
Coil Data between adjacent contacts 2200V 3750V
rms rms
Coil voltage range 6 to 110VDC Initial insulation resistance
6 to 240VAC between insulated elements 100M, 500VDC
Coil insulation system according UL Class B
1
08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company General Purpose Relays
Industrial Relays
Potter & Brumfield
KUIP/KUGP Series Panel Plug-in Relay (Continued)
Other Data Accessories
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content For details see datasheet Sockets and Accessories, KUP Relays
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter Product Code Description
Ambient temperature 27E893 DIN socket (use 20C318 clip)
DC coil KUIP: -45C to 95C 27E121 Track mount socket (use 20C314 clips)
KUGP: -45C to 75C (1 & 2 pole) 27E043 Chassis mount/solder eyelet socket (use 20C254 clip)
AC coil KUIP: -45C to 70C 27E046 Chassis mount/PCB socket (use 20C254 clip)
KUGP: -45C to 70C (1 & 2 pole) 27E067 Chassis mount/quick connect socket (use 20C254 clip)
Category of environmental protection 27E396 Snap-in/quick connect socket (use 20C254 clip)
IEC 61810 RTI - dust protected
Terminal type Quick connects (QC) .187
PCB-THT
Terminal retention, push force 25 lbs for 3s
Weight 85g
Packaging/unit tray/25 pcs., box/150pcs.
Dimensions
Plain case Bracket mount case
.312
.078 R. TYP.
2.90 MAX.
.625 TYP. TYP.
(73.7) (1.98)
(15.88) (7.92)
X
1.906 MAX.
.75
(48.41)
(19.1)
1.531 MAX.
(38.89)
X
X
X
X
.375
.437
(9.53)
2.500
X (11.10)
X
(63.50)
1.531 MAX.
(38.89)
1.406 MAX.
1 2 3
(35.71)
4 5 6 .06
(1.52)
1.406 MAX.
7 8 9
(35.71)
1.906 MAX.
A B
.07 (48.41)
(1.8)
Top flange case PCB layout
Bottom view on solder pins
1.518 MAX.
.078 TYP.
(38.56) 3 Form C shown
(1.98)
Omit unncessary holes for other contact forms
1 2 3
1.713 .003
4 5 6
(43.51 .08)
.206
.076 DIA. TYP.
7 8 9
1.989 .003 (5.23)
1.373 .010 (1.93)
(50.52)
(34.87 .25)
A B
.328
(8.33) .626
(15.90)
2.248 MAX.
.178 TYP.
(57.10)
(4.52)
.437
(11.10)
.875
(22.23)
X Is For Terminal Dimensions.
See Teminal Drawings.
2
08-2011, Rev. 0811 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company