Catalog 1308242
Catalog 1308242
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04) OEG
Issued 3-03 (PDF Rev. 11-04) OEG
Issued 3-03 (PDF Rev. 11-04) OEG
Ordering Information
Ordering Information
Ordering Information
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
1. Basic Series:
1. Basic Series:
1. Basic Series:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZT = TV-8 Rating PC Board Terminals
OZT = TV-8 Rating PC Board Terminals
OZT = TV-8 Rating PC Board Terminals
2. Enclosure:
2. Enclosure:
2. Enclosure:
S = Vent (Flux-tight)* plastic cover (only available with OZF)
S = Vent (Flux-tight)* plastic cover (only available with OZF)
S = Vent (Flux-tight)* plastic cover (only available with OZF)
General Purpose Relays
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
3. Termination:
3. Termination:
3. Termination:
PCB Relays
OEG
1 = 1 pole
1 = 1 pole
1 = 1 pole
4. Coil Voltage:
4. Coil Voltage:
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 24 = 24VDC
05 = 5VDC 09 = 9VDC 24 = 24VDC
Power PCB Relay OZ/OZT
06 = 6VDC 12 = 12VDC 48 = 48VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
5. Coil Input:
5. Coil Input:
D = Standard (720mW) L = Sensitive (540mW)
D = Standard (720mW) L = Sensitive (540mW)
D = Standard (720mW) L = Sensitive (540mW)
n 6. Contact Arrangement:
6. Contact Arrangement: 1pole, 16A, 1 form A(NO) or 1 form C (CO)
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
n
UL TV-8 (OZT) available
7. Contact Material:
7. Contact Material:
7. Contact Material:
n
Meet 5000V dielectric voltage between coil and contactsBlank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
8. Mounting and Termination:
8. Mounting and Termination:
8. Mounting and Termination:
n
Meet 10000V surge voltage between coil and contacts
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
9. Insulation System:
9. Insulation System:
9. Insulation System:
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation
10. Sufx:
10. Sufx:
10. Sufx:
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
* Not suitable for immersion cleaning processes.
* Not suitable for immersion cleaning processes.
* Not suitable for immersion cleaning processes.
Typical applications
Home appliances, office machines
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
OZ-SH-105L,294 OZ-SH-124L,294
OZ-SH-105L,294 OZ-SH-124L,294OZ-SH-105D,294 OZ-SH-124D,294 OZ-SH-112LM1,294
OZ-SH-105D,294 OZ-SH-124D,294 OZ-SH-112LM1,294 OZ-SH-105L,294 OZ-SH-124L,294
OZ-SH-105D,294 OZ-SH-124D,294 OZ-SH-112LM1,294
OZ-SH-105LM1,294 OZ-SH-124LM1,294 OZ-SH-112L,294
OZ-SH-105LM1,294 OZ-SH-124LM1,294 OZ-SH-112L,294 OZ-SH-112D,294
OZ-SH-112D,294 OZ-SH-112D,294 OZ-SH-105LM1,294 OZ-SH-124LM1,294 OZ-SH-112L,294
UCt
Outline Dimensions
Outline Dimensions PC Board Layouts (Bottom View)
PC Board Layouts (Bottom View) Outline Dimensions
.061 DIA .061 DIA PC Board Layouts (Bottom View)
.266 .012 .092 .012 .061 DIA
.266 .012 .092 .012
.266 .012 .092 .012
(1.55)
(1.55) (6.75 .3) (2.35 .3) (1.55)
(6.75 .3) (2.35 .3)
OZF .224 (6.75 .3) (2.35 .3)
OZF .224 OZ
OZ OZF .224
OZ
(5.7)
(5.7) .2 .002
.2 .002 .187 (5.7)
.187 .2 .002
.187
OZ
OZ (.5 .05)
(.5 .05) 8 .059 DIA OZ
8 .059 DIA (4.75) (.5 .05)
(4.75) (4.75) 8 .059 DIA
.134 .25
.134 Appr.25 ovals Coil Data
(1.5) .134 .25
(1.5)
(1.5)
(3.4) (6.35)
(3.4) (6.35)
(3.4) (6.35)
UL E58304, CSA LR48471, TuV R50139112, CQC 03001007810 Coil voltage range 5 to 48VDC
.811 .02 .126
.811 .02 .126
.811 .02 .126
Technical data of approved types on request Coil insulation system according UL class105 (A)
(3.2) .295 .012
(3.2) (20.6 .5).295 .012
(20.6 .5) (20.6 .5) (3.2) .295 .012
(7.5 .3)
(7.5 .3) (7.5 .3)
class155 (F)
Contact Data
.945 .08 .197 .012
.945 .08 .197 .012
.945 .08 .197 .012
(24.0 .2)
(24.0 .2) Contact arrangement 1 form A (NO), 1 form C (CO) Coil versions, DC coil (5.0 .3)
(5.0 .3) (24.0 .2) (5.0 .3)
.197 .012
.197 .012
.197 .012
(5.0 .3)
Rated voltage .157 .012(5.0 .3) 240VAC Coil Rated Operate Release .600 .012Coil Rated coil
.157 .012 .600 .012 (5.0 .3)
.157 .012 .600 .012
(4.0 .3)
(4.0 .3) .012 (15.24 .3)
.012 (15.24 .3) (4.0 .3)
.024 c .012 (15.24 .3)
.024 c Max. switching voltage 24VDC, 240VAC code voltage voltage voltage resistance power
.024 c
(.3) .012 .047
(.3) .012 .047 .047 (.3)
.047 (.60) .012 .047
(.60) .012 (.60) .047
.012
(.3) .012
(.3) (1.2) Rated current (1.2) (1.2) 16A VDC VDC VDC 10% mW
(1.2) (.3) (1.2)
(.3) (1.2)
(.3)
.165 .012 (.3)
.165 .012
.165 .012
1.15 .02
1.15 .02 Switching power 3840VA, 380W Standard coil, 720mW(4.2 .3)
(4.2 .3) .024 .004 1.15 .02
.024 .004 (4.2 .3)
.047 .024 .004
.047 (29.2 .5)
(29.2 .5) OZF .047
OZF (0.6 .1) (29.2 .5)
(0.6 .1) OZF
(1.2) .047 (0.6 .1)
(1.2) .047 .047Contact material AgSnO 05 .0475 3.5 0.25 2 .047 DI36 A 2 .059 DI720A
2 .047 DIA 2 .059 DIA (1.2) .047 .047 2 .059 DIA
2 .047 DIA
(1.2)
(1.2) 1.14 .02 (1.2) (1.5)
1.14 .02 (1.2) (1.5) (1.2) (1.2) (1.2)
(1.2) .504 .02 1.14 .02 (1.5)
.504 .02 (1.2)
Min. recommended contact load 100mA, 5VDC 06 6 4.2 0.3 48.5 720.504 .02
(29.0 .5) .394
(29.0 .5) .394
(12.8 .5) (29.0 .5) .394
(12.8 .5)
(12.8 .5)
(10.0)
(10.0)
.295 .012 (10.0)
.295 .012 Initial contact resistance 100m at 1A, 6VDC 09 9 6.3 0.45 115 720
.295 .012
(7.5 .3)
(7.5 .3)
(7.5 .3)
-1
Frequency of operation, with/without load 1800/18000h 12 12 8.4 0.6 200 720
.300 .004 .394 .006
.300 .004 .394 .006 .394 .006 .300 .004 .394 .006
.394 .006 .300 .004
.300 .004 .394 .006
.300 .004
(7.6 .1) (10.0 .15)
(7.6 .1) (10.0 .15) (10.0 .15)
(10.0 .15) (7.6 .1) (7.6 .1) (10.0 .15)
(7.6 .1) Operate/release time max. .085 .012 24 24 16.8 1.2 820 720 (10.0 .15)
.085 .012 .59 .012 (7.6 .1)
.59 .012 .59 .012 .085 .012
(2.15 .3)
(2.15 .3) (15.0 .3)
(15.0 .3) (2.15 .3)
(15.0 .3)
standard version: 15/8ms 48 48 33.6 2.4 3300 720
.197 .012 .197 .012
.197 .012
.073 .012
.073 .012 .197 .012
.197 .012 .073 .012
(5.0 .3) .197 .012
(5.0 .3) (5.0 .3)
sensitive version: (1.85 .3) 20/8ms 1.02 .02Sensitive coil, 540mW
(1.85 .3) 1.02 .02 (5.0 .3) 1.02 .008 1.02 .02
(5.0 .3) 1.02 .008 (1.85 .3)
.098 .004 (5.0 .3) 1.02 .008
.098 .004 .073
.073 (26.0 .5) .098 .004
(26.0 .5) .073
(26.0 .2) (26.0 .5)
(26.0 .2) (2.5 .1)
(2.5 .1) Electrical endurance (1.85) 05 5 3.8 0.25 48.5 540 (26.0 .2)
(1.85) (2.5 .1)
(1.85)
3
NO 16A, 240VAC, resistive, 100x10 ops. 06 6 4.5 0.3 68 540
Wiring Diagrams
Wiring Diagrams
Wiring Diagrams
3
NC 8A, 240VAC, resistive, 100x10 ops. 09 9 6.8 0.45 155 540
OZ OZF
OZ OZF
OZ OZF
Contact ratings 16A, 240VAC/30VDC 12 12 9.0 0.6 270 540
*
* 6
*
Mechanical endurance 10x10 operations 24 24 18.0 1.2 1100 540
48 48 36.0 2.4 4400 540
* No electrical connection,
* No electrical connection,
* No electrical connection,
All figures are given for coil without pre-energization, at ambient temperature +23C.
(Bottom View) (Bottom View) (Top View) for board attachment only.
(Bottom View) (Bottom View) (Top View) for board attachment only.
(Bottom View) (Bottom View) (Top View) for board attachment only.
Reference Data
Reference Data
Reference Data
Operating Voltage Operate Time Life Expectancy
Operating Voltage Operate Time Electrical enduranceLife Expectancy Operate time Coil operative range
Operating Voltage Operate Time Life Expectancy
180
180 12 100
12 100 180
12 100
13A
13A
8A 13A
8A
160 8A
160
160
Maximum
Maximum 10
10 Maximum
240VAC Resistive 10
16A240VAC Resistive
16A 240VAC Resistive
Allowable 16A
Allowable 140
140 140 Allowable
Operate Time
Operate Time Coil Voltage Operate Time
Coil Voltage
Coil Voltage
Operating
Operating 8 Operating
8 120
120 8
120
Votage Range
Votage Range Votage Range
100
100
100
13A/16A
13A/16A
13A/16A
6 10
6 10
6 10
80
80
80
8A Cool Coil
8A Cool Coil
8A Cool Coil
60
60
4 60
4 4
Hot Coil Applied
Hot Coil Applied
Hot Coil Applied
40
40
40
Pick-Up Voltage
Pick-Up Voltage
2 Pick-Up Voltage
2 2
20 Release Time
20 Release Time
20 Release Time
1
1 0
0 1
0
-40 -20 0 20 40 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 14 16 18 20
-40 -20 0 20 40 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120 140
0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 14 16 18 20
Ambient Temp. (C) Coil Power (W) Contact Current (A)
Ambient Temp. (C) Coil Power (W) Contact Current (A)
Ambient Temp. (C) Coil Power (W) Contact Current (A)
Note: This data is based on the max. allowable
Note: This data is based on the max. allowable
Note: This data is based on the max. allowable
temperature for E type insulation coil (115 C).
temperature for E type insulation coil (115 C). temperature for E type insulation coil (115 C).
Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com
Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com
Dimensions are shown for Dimensions are in inches over Specications and availability www.tycoelectronics.com
reference purposes only. (millimeters) unless otherwise subject to change. Technical support:
reference purposes only. (millimeters) unless otherwise subject to change. Technical support:
reference purposes only. (millimeters) unless otherwise463 subject to change. Technical support:
463 463
specied. Refer to inside back cover.
specied. Refer to inside back cover.
specied. Refer to inside back cover.
1
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
a TE Connectivity Ltd. company Catalog 1308242
Issued 3-03 (PDF Rev. 11-04) OEG
Ordering Information
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
1. Basic Series:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZT = TV-8 Rating PC Board Terminals
2. Enclosure:
S = Vent (Flux-tight)* plastic cover (only available with OZF)
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
General Purpose Relays 06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
PCB Relays
OEG
D = Standard (720mW) L = Sensitive (540mW)
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
Power PCB Relay OZ/OZT (Continued)
7. Contact Material:
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
Catalog 1308242
8. Mounting and Termination:
Insulation Data Other Data
Issued 3-03 (PDF Rev. 11-04) OEG
Initial dielectric strength Material compliance: EU RoHS/ELBlank = PC Board TerminalsV, China RoHS, REACH, Halogen contentP = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
Ordering Information
between open contacts 1000Vrms refer to the Product Compliance Support Center at
9. Insulation System:
between contact and coil 5000Vrms www.te.com/customersupport/rohssupportcenter
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation
Initial surge withstand voltage Ambient temperature
1. Basic Series:
10. Sufx:
between contact and coil 10000V standard coil: -30 to 60C
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
Initial insulation resistance 1000M sensitive coil: -30 to 70C
OZT = TV-8 Rating PC Board Terminals
Clearance/creepage Category of environmental protection
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
2. Enclosure:
between contact and coil 5.5/8mm IEC 61810 RTII - flux proof,
* Not suitable for immersion cleaning processes.
S = Vent (Flux-tight)* plastic cover (only available with OZF)
RTIII - wash tight
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.Vibration resistance (functional) 10 to 50Hz, 1.5mm double amplitude
Shock resistance (functional)
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
3. Termination:
2
IEC 60068-2-27 (half sine) 98m/s , 11ms
1 = 1 pole
OZ-SH-124D,294 OZ-SH-112LM1,294 OZ-SH-105L,294 OZ-SH-124L,294
OZ-SH-105D,294
Terminal type PCB-THT
4. Coil Voltage: OZ-SH-112L,294
OZ-SH-112D,294 OZ-SH-105LM1,294 OZ-SH-124LM1,294
Weight 13g
05 = 5VDC 09 = 9VDC 24 = 24VDC
Resistance to soldering heat THT
06 = 6VDC 12 = 12VDC 48 = 48VDC
Catalog 1308242 Outline Dimensions
IEC 60068-2-20 260C/5s PC Board Layouts (Bottom View)
.061 DIA
.092 .012
.266 .012
Issued 3-03 (PDF Rev. 11-04) OEG
5. Coil Input: (1.55)
Packaging/unit box/1000 pcs. (2.35 .3)
(6.75 .3)
OZF .224
OZ
D = Standard (720mW) L = Sensitive (540mW) (5.7)
Ordering Information .2 .002
.187
OZ
(.5 .05)
8 .059 DIA
(4.75)
6. Contact Arrangement:
.134 .25
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
(1.5)
(3.4) (6.35)
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
1. Basic Series:
.811 .02 .126
7. Contact Material:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
(20.6 .5) (3.2) .295 .012
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) (7.5 .3)
OZT = TV-8 Rating PC Board Terminals
8. Mounting and Termination:
2. Enclosure:
.945 .08 .197 .012
S = Vent (Flux-tight)* plastic cover (only available with OZF)Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
(24.0 .2)
(5.0 .3)
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. .197 .012
9. Insulation System:
(5.0 .3)
.157 .012 .600 .012
3. Termination:
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation
(4.0 .3)
(15.24 .3)
.012
.024 c
1 = 1 pole
(.3) .012
.047 .047
10. Sufx: (.60)
.012
(.3) (1.2) (1.2)
4. Coil Voltage:
(.3)
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
.165 .012
05 = 5VDC 09 = 9VDC 24 = 24VDC
1.15 .02
(4.2 .3)
.024 .004
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
.047
(29.2 .5)
06 = 6VDC 12 = 12VDC 48 = 48VDC OZF
(0.6 .1)
(1.2) .047
.047 2 .047 DIA 2 .059 DIA
* Not suitable for immersion cleaning processes.
(1.2)
5. Coil Input: 1.14 .02 (1.2) (1.5)
(1.2)
.504 .02
(29.0 .5) .394
D = Standard (720mW) L = Sensitive (540mW) (12.8 .5)
(10.0)
.295 .012
6. Contact Arrangement: Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
(7.5 .3)
.300 .004 .394 .006
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
.394 .006
OZ-SH-124D,294 OZ-SH-112LM1,294 OZ-SH-105L,294 OZ-SH-124L,294.300 .004
OZ-SH-105D,294
(7.6 .1) (10.0 .15)
(10.0 .15)
(7.6 .1)
.085 .012
7. Contact Material: .59 .012
OZ-SH-112L,294
OZ-SH-112D,294 OZ-SH-105LM1,294 OZ-SH-124LM1,294
(15.0 .3) (2.15 .3)
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
.197 .012
.073 .012
.197 .012
(5.0 .3)
8. Mounting and Termination:
Outline Dimensions (1.85 .3) PC Board Layouts (Bottom View)1.02 .02
(5.0 .3) 1.02 .008
.061 DIA
Dimensions Terminal assignment .092 .012
.266 .012 .098 .004
.073
(26.0 .5)
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). (1.55)
(26.0 .2)
(6.75 .3) (2.35 .3)
(2.5 .1)
.224 (1.85)
OZ OZF Bottom view on solder pins
9. Insulation System: (5.7)
.2 .002
.187
OZ
(.5 .05) 8 .059 DIA
(4.75)
Blank = Class A (105 C) Insulation F= Class F (155 C) Insulation Wiring Diagrams
.25
.134
(1.5)
(3.4) (6.35)
10. Sufx:
OZ OZF
,200 = Standard model forS enclosure on OZ and OZT ,000 = Standard model for coil input on OZF Other Sufx = Custom mode l
.811 .02 .126
.295 .012
(20.6 .5) (3.2)
*
,294 = Standard model forS enclosure on OZ and OZT ,300 = Standard model for coil input on OZF
(7.5 .3)
* Not suitable for immersion cleaning processes.
* No electrical connection,
.945 .08 .197 .012
(Bott(24.0 om .2V)iew) (Bottom View) (Top View) for board attachment only.
(5.0 .3)
.197 .012
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
(5.0 .3)
.157 .012 .600 .012
OZ-SH-105L,294 OZ-SH-124L,294
OZ-SH-105D,294 OZ-SH-124D,294 OZ-SH-112LM1,294
(4.0 .3)
.012 (15.24 .3)
Reference Data
.024 c
OZ-SH-112D,294 OZ-SH-105LM1,294 (.3) OZ-SH-124LM1,294 OZ-SH-112L,294
.012 .047 .047
(.60)
.012
(.3) (1.2) Operating Voltage Operate Time Life Expectancy
(1.2)
(.3)
.165 .012
1.15 .02
Outline Dimensions (4.2 .3)
.024 .00418PC Board Layouts (Bottom View)0
.061 DIPCB layoutA 12 100
.047
(29.2 .5) .266 .012 .092 .012
OZF
(1.55) (0.6 .1)
(6.75 .3) (2.35 .3) (1.2) 1.0473A .047 2 .059 DIA
2 .047 DIA
OZF Bottom view on solder pins.224
OZ 8A
1.14 160 .02 (1.2) (1.2)
(5.7) (1.2) (1.5)
.2 .002 .504 .02
.187
(29.0 O .5)Z .394Maximum
(.5 .05)
(12.8 .5) (4.75) 8 .059 DIA 10
240VAC Resistive
.134 .25 16A (10.0)
(1.5) Allowable
.295 .012 140
(3.4) (6.35)
(7.5 .3) Operate Time
Coil Voltage
Operating .300 .004 .394 .006
.811 .02 .126
.394 .006 8
.300 .004 120
(20.6 .5) (3.2) .295 .012 (7.6 .1) (10.0 .15)
Votag(10.0 e Ran .15)ge
.085 .012 (7.6 .1)
.59 .012
(7.5 .3)
(2.15 .3)
(15.0 .3)
100
.197 .012 13A/16A
.073 .012 6
.197 .012 10
(5.0 .3) .945 .08 .197 .012
(1.85 .3) 1.02 .02
(5.0 .3)
80 1.02 .008
(24.0 .2) (5.0 .3)
.098 .004
.073 (26.0 .5)
.197 .012
(26.0 .2)
(2.5 .1)
(1.85) 8A Cool Coil
(5.0 .3)
.157 .012 .600 .012
60
4
(4.0 .3)
.012 (15.24 .3)
.024 c
Hot Coil Applied
(.3) Wiring Diagrams
.012 .047
(.60) .047
.012
(.3) (1.2) 40
(1.2)
(.3)
.165 .012 Pick-Up Voltage
OZ OZF 2
1.15 .02
(4.2 .3)
.024 .004
.047
(29.2 .5) 20 Release Time
OZF
(0.6 .1)
*
(1.2) .047 .047 2 .059 DIA
2 .047 DIA
(1.2) (1.2)
1.14 .02 (1.5)
(1.2) 1
.504 .02
0
(29.0 .5) .394
(12.8 .5)
-40 -20 0 20 40 60 80 100 120 140 0 2 4 6 8 10 12 14 16 18 20
* No electrical connection, 0.2 0.4 0.6 0.8 1.0 1.2 1.4
(10.0)
.295 .012
Ambient Temp. (C) Coil Power (W) Contact Current (A)
(7.5 .3)
(Bottom View) (Bottom View) (Top View) for board attachment only.
.300 .004 .394 .006
.394 .006
.300 .004
Note: This data is based on the max. allowable
(7.6 .1) (10.0 .15)
(10.0 .15)
(7.6 .1)
.59 .012 .085 .012
temperature for E type insulation coil (115 C).
(2.15 R .3e) ference Data
(15.0 .3)
.197 .012
.073 .012
.197 .012
(5.0 .3) Operating Voltage Operate TimDimensions are shown fore Life Dimensions are in inches overExpectancy Specications and availability www.tycoelectronics.com
1.02 .02
(1.85 .3)
(5.0 .3) 1.02 .008
.098 .004
.073
(26.0 .5) reference purposes only. (millimeters) unless otherwise subject to change. Technical support:
180 (26.0 .2) 463
(2.5 .1) 12 100
(1.85)
2
specied. Refer to inside back cover.
13A
8A
04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec -
160
Wiring Diagrams
Maximum
www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications
10
16A 240VAC Resistive
Allowable
OZ 140OZF
2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change.
Operate Time
Coil Voltage
*
a TE Connectivity Ltd. company Operating