TE Connectivity 2-Piece Power Connectors
Quick Reference Guide
2-Piece Power Connectors
THINGS TO CONSIDER WHEN CHOOSING POWER CONNECTORS
Application. Does the application require a board-to-board, wire-to-board, wire-to-wire, bus bar, card edge
or a combination of these types of connectors?
Current and Voltage. Does the connector require power only, or a combination of power and signal?
How much current is required in the application? Keep in mind that power connector performance is
typically measured in amperes (or amps). The voltage is also very important as it defines the spacing
between the contacts.
Hot-Pluggability. Will the application be mated while under electrical load? If so, a hot-pluggable connector
is required. Many of the products in this guide have been approved for use in hot-plug applications.
TYPICAL POWER CONNECTOR APPLICATIONS
AC to DC and DC to DC High Density Power Distribution
Power Supplies Uninterruptible Power Supplies (UPS)
High End Computers Removable Battery Packs
Servers Board Stacking
Data Storage Equipment Power Distribution
Telecommunications Switches
te.com/powerconnectors
te.com/powerconnectorsTE Connectivity 2-Piece Power Connectors
Application: Hot Swappable Power Supplies (500w5KW)
CHARACTERISTICS
Connector MULTI-BEAM XLE FLATPAQ MINIPAK HDL
Current Rating Up to 75 A* 32 Amps* Up to 40 Amps*
Vented Housings l l
Licensed
l l
Second source
Height (mm) 12 mm 14 mm 8 mm - 9 mm
Modular l
Active Guides l
Customizable l l l
* Single contact current rating
te.com/products/multibeamxle te.com/products/minipakhdl
MULTI-BEAM XLE Connector FLATPAQ Connectors MINIPAK HDL Connector
New 6 beam power contact offers up to 32 Amp high-performance High-density, low profile, power/signal,
75 A current rating and delivers more CROWN BAND power contacts blind-mate connector
than 200 Amps/linear inch
True hot-plug power contacts available Developed to meet next generation
New 25A low power contact occupies 1U application by reducing airflow
Versatile modular design allows low
50% less pcb space than MULTI-BEAM XL impedance
volume customized configurations to
power contacts
meet your specific application Hot-pluggable power supplies
New slim guide sockets reduce the requirements
Contacts rated up to 40 amps and
overall PCB footprint
Solder and compliant press-fit deliver more than 150 amps per
Vented housing allows for better heat termination options available linear inch
dissipation
Rugged design features active guide pins Reference Part Numbers*
Hot-plug capable 2-1926732-5
Reference Part Numbers*
2-1926733-5
Reference Part Numbers* 6646597-1
1926845-6
6450830-2 6646722-1
6450850-2
Rechargeable Batteries (for portable/hand-held electronic devices)
RECHARGEABLE BATTERIES
Part Number Pitch (mm) No. of Positions Mount Style
1827684-1 2 7 Vertical Surface Mount Receptacle
1827654-1 2 7 Right Angle Thru-Hole Plug
1-1123688-7 2.5 10 Vertical Surface Mount Receptacle
6123978-1 2.5 4 Right Angle Thru-Hole Plug
120591-1 / 1 Horizontal Thru-Hole Coin Cell
Battery Interconnects 5787430-1 5 / Vertical Solder Right Hand Plug
Current capacity 7 Amps/single 5787441-1 5 / Right Angle Solder Keyless Plug
contact at 30 T-Rise
Choice of right angle or vertical mount
headers with left, right or keyless
polarization
5 mm pitch headers available for 7.2, 10.8
and 12.0 volts rechargeable batteries
*Part numbers listed are examples of some available samples, please visit website for additional and mating part numbers.
te.com/powerconnectors