154BC SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0 - 100mV Output Gage and Absolute Wide Compensated Temperature Range The 154BC is a 19mm small profile, media compatible, FEATURES piezoresistive silicon pressure sensor packaged in a 316L stainless steel or ASTM Grade 2 CP titanium housing. The O-Ring Mount 154BC is a low-cost unit designed without a header for O-ring -20C to +85C Compensated Temperature mounting and OEM applications where compatibility with 1.0% Interchangeable Span corrosive media is required. The titanium option offers greater (provided by gain set resistor) resistance to corrosive materials and harsh cleaning chemicals, Solid State Reliability opening the range of its application use to things such as dialysis 0.3% Pressure Non Linearity machines and salt/brackish water measurements. Titanium Option The sensing package utilizes silicone oil to transfer pressure from either a 316L stainless steel or titanium diaphragm to the sensing element. A ceramic substrate is attached to the package that APPLICATIONS contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is Medical Instruments (Dialysis Machines) included which can be used to adjust an external differential Process Control amplifier and provide span interchangeability to within 1%. Fresh, Waste, Salt and Brackish Water Measurements Please refer to the 154N uncompensated and constant voltage Refrigeration/Compressors datasheets for more information on different features of the 154. Pressure Transmitters Hydraulic Controls STANDARD RANGES SENSOR SOLUTIONS ///154BC 04/2018 Page 1 15 4B C Range (psi) Gage Range (Bar) Absolute 0 to 015 0 to 030 0 to 050 0 to 100 0 to 007 0 to 012 0 to 018 0 to 300 0 to 028 PERFORMANCE SPECIFICATIONS Unless otherwise specified: Supply Current: 1.5 mA, Ambient Temperature: 25C PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Zero Pressure Output -1.0 0 1.0 mV 2 Pressure Non Linearity -0.30 0.30 %Span 3 Pressure Hysteresis -0.20 0.20 %Span Repeatability 0.02 %Span Input Resistance 2.0 3.5 5.8 k 3 Output Resistance 3.0 6.0 k Temperature Error Span -1.0 1.0 %Span 4 Temperature Error Offset -1.0 1.0 %Span 4 Thermal Hysteresis Span -0.25 0.05 0.25 %Span 4 Thermal Hysteresis Offset -0.25 0.05 0.25 %Span 4 Long Term Stability Span 0.10 %Span/Year Long Term Stability Offset 0.25 %Span/Year Supply Current 0.5 1.5 2.0 mA 5 Output Load Resistance 5 M 6 Insulation Resistance (50V ) DC 50 M 7 Output Noise (10Hz to 1kHz) 1.0 V p-p Response Time (10% to 90%) 0.1 ms Overload Pressure 2X Rated 8 Burst Pressure 3X Rated 9 Compensated Temperature -20 +85 C Operating Temperature -40 +125 C 10 Storage Temperature -50 +125 C 10 Media Pressure Port Liquids and Gases compatible with 316L Stainless Steel or ASTM Grade 2 CP Titanium Notes 1. For amplified output circuits, 3.012V 1% interchangeability with gain set resistor. See application schematic. 2. Measured at vacuum for absolute (A), ambient for gage (G). 3. Best fit straight line. 4. Over the compensated temperature range with respect to 25C. 5. Guarantees output/input ratiometricity. 6. Load resistance to reduce measurement errors due to output loading. 7. Between case and sensing element. 8. 2X or 500psi, whichever is less. The maximum pressure that can be applied without changing the transducers performance or accuracy. 9. 3X or 600psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 10. Maximum temperature range for product with standard cable and connector is -20C to +105C. 11. Marking: Part marked with Model Number, Pressure Range, Type, Lot Number, Serial Number and Date Code 12. Shipping: The stainless steel diaphragm is protected by a plastic cap. Each unit will be packaged individually in a plastic vial with antistatic foam. DIMENSIONS SENSOR SOLUTIONS ///154BC 04/2018 Page 2