Catalog 1308242
Issued 3-03 PRODUCTS UNLIMITED
Model 93 - 3100 series
Definite Purpose Contactor
4-pole, 25-40 FLA
AC Coil
File E75492
File EN60947-4-1:1991
IEC 947-4-1
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
Environmental Data
Temperature Range: Storage and Operating: -40C +65C.
4-pole contactors.
Convenient universal mounting plate. Flammability: UL 94-HB housing.
Optional interlock/auxiliary switches available.
Mechanical Data
Contact Termination:
25, 30 FLA Models
Contact Data @ 25C Type: #10-32 Screw with quad 0.250 (6.35 mm) quick connects.
Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.)
Arrangements: 4 Form X (4PST-NO-DM).
Tightening Torque: 25 in.-lbs.
Maximum Ratings: See Contact Ratings Table.
40 FLA Models
Material: Silver Cadmium Oxide.
Type: Box Lug with dual 0.250 (6.35 mm) quick connects.
Wire Size: 14-4 Cu/Al AWG
Tightening Torque: 40 in.-lbs.
Coil Termination: Dual 0.250 (6.35 mm) quick connects, standard.
Coil Data @ 25C
A 0.250 quick connect and a #6-32 screw, optional.
Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below.
Arc Cover: Optional on 25-30 FLA models, standard on 40 FLA models.
Insulation Class: UL Class B (130C).
Weight: 24 oz. (683 g) approximately
Duty Cycle: Continuous.
Contact Ratings
Full Number Line Locked Resistive Maximum Horsepower
Load of Voltage Rotor Amps Voltage Single Three
Amps Poles Amps Rating Phase Phase
240/277 150 35 110/120 2 -
25 3 480 125 35 200/208 - 7.5
600 100 35 240/277 5 10
480 - 15
240/277 180 40 110/120 2 -
30 3 480 150 40 200/208 - 10
600 120 40 240/277 5 10
480 - 15
240/277 240 50 110/120 3 -
40 3 480 200 50 200/208 - 10
600 160 50 240/277 7.5 10
480 - 20
Coil Data
Nominal Coil Voltage 24 120 208/240 277 480
Maximum Pickup Volts 19.2 93 177 220 384
Drop-Out Volts Range 6 -15 20 - 70 40 - 140 50-185 150 - 270
Nominal Inrush VA @ 50 Hz 68 68 68 58 48
Nominal Inrush VA @ 60 Hz 60 60 60 52 52
Nominal Sealed VA @ 50 Hz 14 14 14 11 11
Nominal Sealed VA @ 60 Hz 9 9 9.5 9.5 9
Nominal DC Resistance - Ohms 5 148 520 750 2700
Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com
reference purposes only. (millimeters) unless otherwise subject to change. Technical support:
836
specified. Refer to inside back cover.Catalog 1308242
Issued 3-03 PRODUCTS UNLIMITED
Ordering Information
Typical Part No. B 3100 - 40 Q 9 999
1. Series:
3100 = 4-pole, 25-40 FLA contactor
2.Packaging:
Y = Individual Pack
- = Bulk Pack
A-ZZZ = Customer specific information (assigned by factory)
3.Pole Configuration:
40 = 4 Form X (4PST-NO-DM)
4.Coil Voltage (50/60 Hz.):
Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded
T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded
5.Contact Ratings (Inductive):
8 = 25 FLA 9 = 30 FLA 10 = 40 FLA
6.Customer ID Suffix:
999 = Standard Model 000-998 = Factory assigned customer ID
7. Option Code:
Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options.
Standard part numbers listed below are more likely to be available from stock.
None at present.
Outline Dimensions Termination Options
2.00
3.055 (50.8)
.250
.250
(77.6)
(6.35)
(6.35)
.253
(6.43)
Standard on Special on Standard
3.25
(82.55)
25, 30 FLA 25, 30 FLA on 40 FLA
3.125
3.75 #10-32 Combination #10-32 Sems Lug accepts 14-4
(79.38)
(95.25)
Phillips, Slotted & Screw Cu/Al AWG
5/16 Hex Head with Pressure
#12 Washer Plate
ORDERING NOTE: Standard terminals need not be specified
in the Ordering Information chart above. Special terminals
are offered on a special order basis. Special order items may be
2.493
subject to extended leadtimes and significant minimum order
.203 TYP
(63.3)
.203 TYP
quantities. Your Tyco Electronics sales engineer must consult
(5.156)
(5.156)
2.633
with the factory before providing price and availability
(66.9)
information regarding items with these options.
Shown with Optional Auxiliary Switch
Auxiliary Switches
Equipped with 0.250 (6.35) Quick Connect Terminals
Various interlock / auxiliary switches are available for the Model 93 contactor.
Factory Modifications Field Added Kits
Description Contact Config. Kit Catalog Number of
NO NC Number Kits Required
Single unit interlock 1 0 34220-303N 1
configurations listed. 0 1 34220-331N 1
Maximum of two. Must 1 1 34220-332N 1
be same polarity. 2 0 34220-303N 2
NORMALLY OPEN NORMALLY CLOSED
See footnote (1) for ratings. 0 2 34220-331N 2
-303 STYLE -331 STYLE
2 2 34220-332N 2
SPDT Circuit 1 1 34220-337N 1
See footnote (2) for ratings. 2 2 34220-337N 2
SPDT Dry Circuit, 0.1 amp max. 1 1 34220-341N 1
Gold Flashed Contacts 2 2 34220-340N 1
Equipped with #6-32 Screw Terminals & Saddle Clamps
Factory Modifications Field Added Kits
NORMALLY OPEN & CLOSED SPDT
Description Contact Config. Kit Catalog Number of
-332 STYLE -337 & -341 STYLE
NO NC Number Kits Required
Single unit interlock 1 0 34220-342N 1
configurations listed. 0 1 34220-343N 1
Maximum of two. Must 1 1 34220-344N 1
be same polarity. (note 1)
Footnotes: Ratings of Auxiliary Interlocks / Switches
(1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337):
and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC
W/ #6-32 SCREW & SADDLE CLAMP
120V 240V 480V 600V 1/2A, 125 VDC; 1/4A, 250 VDC:
-344 STYLE
Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load
Make 30A 15A 7.5A 6A
Continuous 10A 10A 10A 10A
Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com
reference purposes only. (millimeters) unless otherwise subject to change. Technical support:
837
specified. Refer to inside back cover.