RNF-150
High-performance, thin-wall, flexible,
fluoropolymer heat-shrinkable tubing
RNF-150 is a highly flame-resistant A very thin wall gives RNF-150 of components. RNF-150 is not
thin-wall heat-shrinkable tubing excellent flexibility. recommended for use in direct
that has excellent durability. contact with ketones.
It is manufactured from a modified Applications include insulation,
fluoropolymer whose properties jacketing, and identification of wire RNF-150 is UL-recognized at 150C,
include toughness, chemical bundles; light-duty harnesses; 600 V, with a UL VW-1 flame retardance
resistance, and high-temperature insulation and protection of terminals rating and meets the requirements of
performance. and wire connections; and packaging AMS-DTL-23053/18, Class 2.
Temperature rating
Full recovery temperature: 150C
Continuous operating temperature: 55C to 155C
Recommended maximum temperature for use as a primary insulator: 135C
Specifications*
Type Raychem Military UL
RNF-150 RT-370 AMS-DTL-23053/18, Class 2 E85381 VW-1
*When ordering, always specify latest issue.
Dimensions (millimeters/inches)
W
Expanded as supplied
Fully recovered after heating
D d
Weight as
Inside diameter Wall thickness supplied (max.)
D (min.) d (max.) W
Expanded Recovered Recovered lb./
kg./
Size as supplied after heating after heating** 100 ft. 100 m
3/64 1.2 0.046 0.6 0.023 0.25 0.05 0.010 0.002 0.10 0.15
1/16 1.6 0.063 0.8 0.031 0.25 0.05 0.010 0.002 0.13 0.19
3/32 2.4 0.093 1.2 0.046 0.25 0.05 0.010 0.002 0.17 0.25
1/8 3.2 0.125 1.6 0.062 0.25 0.05 0.010 0.002 0.22 0.33
3/16 4.8 0.187 2.4 0.093 0.25 0.05 0.010 0.002 0.31 0.46
1/4 6.4 0.250 3.2 0.125 0.30 0.08 0.012 0.003 0.40 0.60
3/8 9.5 0.375 4.8 0.187 0.30 0.08 0.012 0.003 0.73 1.09
1/2 12.7 0.500 6.4 0.250 0.30 0.08 0.012 0.003 0.96 1.43
3/4 19.1 0.750 9.5 0.375 0.43 0.08 0.017 0.003 1.92 2.85
1 25.4 1.000 12.7 0.500 0.48 0.08 0.019 0.003 2.78 4.14
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering information
Colors Standard Black
Nonstandard White
Size selection Always order the largest size that will shrink snugly over the component being covered.
Special order sizes may be made available upon request.
Standard packaging On spools
Ordering description Specify product name, size, and color; for example, RNF-150 1/4-0 (0=Black).Specification values
Property Unit Requirement Method of test
Physical Dimensions mm (inches) See reverse ASTM D 2671
Longitudinal change percent +0, -10 ASTM D 2671
Concentricity as supplied percent 70% minimum ASTM D 2671
Weight per length as supplied lb./100 ft. (kg./100 m) max. See reverse See note below
Recovery angle degrees 5 maximum See note below
Tensile strength psi (Mpa) 4000 (27.6) minimum ASTM D 2671
Ultimate elongation percent 300 minimum ASTM D 2671
Secant modulus (as supplied) psi (Mpa) 25,000 to 100,000 (172 to 690) ASTM D 2671
Low-temperature flexibility No cracking AMS-DTL-23053
(4 hours at -55C/-67F)
Heat shock No dripping, flowing, ASTM D 2671
(4 hours at 250C/482F) or cracking
Dynamic cut-through lb. (kg.) 5 (2.3) minimum ASTM D 3032
(135C/275F) See note below
Heat resistance ASTM D 2671
(336 hours at 225C/437F)
Followed by test for:
Ultimate Elongation percent 250 minimum ASTM D 2671
Color MIL-STD-104, Class I MIL-STD-104
Electrical Dielectric strength volts/mil (kV/mm) 500 (19.7) minimum ASTM D 2671
11
Volume resistivity ohm-cm 10 minimum ASTM D 2671
Chemical Corrosive effect Noncorrosive ASTM D 2671
Copper mirror corrosion Copper removal ASTM D 2671
(16 hours at 160C/320F) 5% maximum Procedure A
Copper contact corrosion No blackening or pitting ASTM D 2671
(16 hours at 175C/347F) of copper Procedure B
Copper stability No brittleness, glazing, or severe ASTM D 2671
(168 hours at 180C/356F) discoloration of tubing. No pitting Procedure B
or blackening of copper.
Followed by test for:
Ultimate elongation percent 250 minimum ASTM D 2671
Flammability 25% maximum flag burn; no UL 224, VW-1
burning of cotton; no flaming or ASTM D 2671
glowing longer than 60 seconds Procedure C
Fungus resistance ISO 846
Method B
Followed by tests for:
Tensile strength psi (Mpa) 4000 (27.6) minimum ASTM D 2671
Ultimate elongation percent 300 minimum ASTM D 2671
Dielectric strength volts/mil (kV/mm) 500 (19.7) minimum ASTM D 2671
Water absorption percent 0.5 maximum ASTM D 2671
(24 hours at 23C/73F)
Fluid resistance ASTM D 2671
(24 hours at 50C/122F) in:
JP-8 fuel (MIL-T-5624)
Hydraulic fluid (MIL-H-5606)
Aviation gasoline100/300
(MIL-G-5572)
Water
Lubricating oil (MIL-L-23699)
Followed by tests for:
Dielectric strength volts/mil (kV/mm) 400 (15.8) minimum ASTM D 2671
Tensile strength psi (Mpa) 2000 (13.8) minimum ASTM D 2671
Note: Consult RT-370 for specific details about test procedures.
Raychem is a trademark of Tyco Electronics Corporation.
Users should independently evaluate the suitability of the product for their application.
Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporations only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporations Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
For more information about this product visit www.tycoelectronics.com
1988, 1990, 1995, 2002 Tyco Electronics Corporation Printed in USA 1654068 6/02