Moulded Chip Inductor 18:12 Type 3613C Series Type 3613C Series Characteristics - Style Opening Nominal Value Inductance Self Resonant DC Allowance Measuring Q Inductance Coding Tolerance Frequency Resistance DC Frequency (min) (H) Marking (%) (MHz) (min) (ohms max) (mA) (MHz) 0.10 R10M 20% 35 300 0.18 800 25.2 0.12 R12M 20% 35 280 0.20 770 25.2 0.15 R15M 20% 35 250 0.22 730 25.2 0.18 R18M 20% 35 220 0.24 700 25.2 0.22 R22M 20% 40 200 0.25 665 25.2 0.27 R27M 20% 40 180 0.26 635 25.2 0.33 R33M 20% 40 165 0.28 605 25.2 Specially developed for automatic 0.39 R39M 20% 40 150 0.30 575 25.2 mounting applications, this exciting 0.47 R47M 20% 40 145 0.32 545 25.2 range of chip inductors are ferrite 0.56 R56M 20% 40 140 0.36 520 25.2 based and sealed in a thermoset 0.68 R68M 20% 40 135 0.40 500 25.2 plastic body. They employ solder 0.82 R82M 20% 40 130 0.45 475 25.2 coated copper terminations with 1.0 1R0K 10% 50 100 0.50 450 7.96 barrier layer. Customers can therefore 1.2 1R2K 10% 50 80 0.55 430 7.96 expect consistent quality, performance 1.5 1R5K 10% 50 70 0.60 410 7.96 and reliability. Its smooth top surface 1.8 1R8K 10% 50 60 0.65 390 7.96 makes it particularly well suited to pick 2.2 2R2K 10% 50 55 0.70 380 7.96 and place equipments. 2.7 2R7K 10% 50 50 0.75 370 7.96 3.3 3R3K 10% 50 45 0.80 355 7.96 Truly the last word in 1812 chip 3.9 3R9K 10% 50 40 0.90 330 7.96 inductors. 4.7 4R7K 10% 50 35 1.00 315 7.96 5.6 5R6K 10% 50 33 1.10 300 7.96 Key Features 6.8 6R8K 10% 50 27 1.20 285 7.96 8.2 8R2K 10% 50 25 1.40 270 7.96 High Reliability 10.0 100K 10% 50 20 1.60 250 2.52 Small Versatile Size - 12.0 120K 10% 50 18 2.00 225 2.52 3.2 x 4.5 mm 15.0 150K 10% 50 17 2.50 200 2.52 Temperature Range 18.0 180K 10% 50 15 2.80 190 2.52 -30C to +100C 22.0 22OK 10% 50 13 3.20 180 2.52 Supplied in Standard 27.0 270K 10% 50 12 3.60 170 2.52 Carrier Tape 33.0 330K 10% 50 11 4.00 160 2.52 39.0 390K 10% 50 10 4.50 150 2.52 Suitable for Dip and Wave 47.0 470K 10% 50 10 5.00 140 2.52 Solder 56.0 560K 10% 50 9.0 5.50 135 2.52 Insulation 1000M R min 68.0 680K 10% 50 9.0 6.00 130 2.52 Available from Stock 82.0 820K 10% 50 8.0 7.00 120 2.52 100 101K 10% 40 8.0 8.00 110 0.796 120 121K 10% 40 6.0 8.00 110 0.796 150 151K 10% 40 5.0 9.00 105 0.796 180 181K 10% 40 5.0 9.50 102 0.796 220 221K 10% 40 4.0 10.0 100 0.796 270 271K 10% 40 4.0 12.0 92 0.796 330 331K 10% 40 3.5 14.0 85 0.796 390 391K 10% 40 3.0 18.0 80 0.796 470 471K 10% 40 3.0 26.0 62 0.796 560 561K 10% 30 3.0 30.0 50 0.796 680 681K 10% 30 3.0 30.0 50 0.796 820 821K 10% 30 2.5 35.0 30 0.796 1000 102K 10% 20 2.5 40.0 30 0.252 5% Tolerance available on selected value ranges. Please enquire Characteristics - Environmental Insulation: 1000 M ohms Temperature Range: -30C to +100C Humidity Load life: L/L within 10% Vibration (see test method): L/L within 5% Literature No. 1773143 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 01-07 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.comMoulded Chip Inductor 18:12 Type 3613C Series Dimensions Test Methods Item Standard Test Method DC Superposition L/L Within -10% When the allowable current was applied, the inductance was measured Characteristics with a YHP 4262A and compared with the initial value. Temperature Within 20C When the allowable current was applied, the amount of temperature rise Rise was measured by the change in resistance. Temperature L/L Within 5% Measurements were taken in a temperature range of -25C to 85C and Rise the value at +20C was used as the standard value. Overcurrent No smoke and no fire Twice the allowable current was applied for a period of five minutes. Test Insulation Not less than 1000 M 0.3mm diameter copper wires were wound around the coils three times and Resistance measurements were taken after 250VDC was applied between the wire and the terminals for a period of 1 minute. Tensile No separation from substrate After the inductors were soldered to substrates, a force of 1.0kg was applied in both Strength Test the x and y directions for a period of 5 seconds. Stress Test No breakage After the inductors were mounted on substrates, 1-mins. 10-55-10 cycle per seconds sweeps 1.5mm stroke vibrations were applied for 2 hrs. each in the X, Y and Z directions. Drop Test No pronounced abnormality in The inductors were dropped 10 times from a height of 1.0 metre onto a concrete floor. appearance Vibration Test L/L Within 10% After the inductors were mounted on substrates, 1-mins. 10-55-10 cycle per seconds Q Not less than 30 sweeps 1.5mm stroke vibrations were applied for 2 hours each in the X, Y and Z directions Humidity Resistance L/L Within 10% Measurements were taken after the allowable current was applied while the inductors Load Test Q Not less than 30 were stored at 60C 2C in 90 to 95% RH for a period of 500 hours. Low Temperature L/L Within 10% Measurements were taken after the inductors were stored at -40C 2C for period Resistance Test Q Not less than 30 1000 hours Temperature L/L Within 10% Measurements were taken after the inductors were stored for 30 minutes, during which Cycle Test Q Not less than 30 they were subjected to 20 temperature cycles of between -25C and +85C. High Temperature L/L Within 10% Measurements were taken after the allowable was applied while the inductors were stored Resistance Load Test Q Not less than 30 at 85C for a period of 1000 hours. Test Notes The measuring method for the test data given overpage are as follows: Inductance: Direct reading from Q-meter (equivalent to YHP 4342A, jig used) Q: Direct reading from Q-meter (equivalent to YHP 4342A, jig used) Self resonant frequency: Grid Dipo Meter (equivalent to Measurement M159) DC resistance: Wheatstone bridge (equivalent to YEW 2755) Unless otherwise specified, the temperature is 20C 5C and the humidity is 65% 20% How to Order 3613C 1R5 K Common Part Inductance Tolerance J - 5% 3613C - 18:12 Value Code K - 10% Inductor (see table) M - 20% Literature No. 1773143 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 01-07 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com