High Value / High Voltage Resistors Type HB Series Key Features Up to 15kV Element Voltage Unique specification for the most deman- ding applications High Ratio of Size to Power The solution to your PCB population problems 1kW to 1GW Coupled with 1% tolerance gives ultimate design flexibility Established Product with Proven Reliability Low Inductance For the fastest TEConnectivity (TE) is a leading supplier of standard and custom designed high switching speeds value/high voltage resistors for high voltage, industrial, control, medical and general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and Applications 30kV to order. The resistors are made from quality materials for optimum reliability and High Voltage stability. TE can test resistors to conform to relevant international, MIL or customer Voltage Divider specifications. TEis happy to advise on the use of resistors for high frequency Surge applications and to supply information for high voltage use. Filter Characteristics - Electrical Balancing HBA HB1 HB3 Inrush Limiting Power Dissipation - Power 20C (W): 0.8 2.0 4.0 70C: 0.4 1.0 2.0 Ohmic Value - Min (Ohms): 1K 10K 10K Max: 120M 1G 1G Resistance Tolerance (%) (Tighter By Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5% Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV 6 6 6 Insulation Resistance - Epoxy Coated, 500V dc (Ohms): >10 M >10 M >10 M Load Stability - 1000hrs 70C (%): 0.5% 0.5% 0.5% Temp. Rapid Change - -55C to 125C for 5 cycles (R): 0.1% 0.1% 0.1% Endurance - 1000 Hours 200C (R): <=2% <=2% <=2% Resistance to Soldering Heat - 350C for 3.5seconds (R): 0.05% 0.05% 0.05% Temperature Coefficient (ppm/C): 100ppm/C 100ppm/C 100ppm/C (20ppm/C available to special order) Voltage Coefficient: Negligible up to 100K Negligible up to 200K Increasing to Increasing to 0.02ppm/Volt at 800K 0.01ppm/Volt at 1M0 Increasing to Increasing to 1.0ppm/Volt at 5M0 1.0ppm/Volt at 10M Increasing to Increasing to 2.0ppm/Volt at 50M 2.0ppm/Volt at 100M Increasing to Increasing to 8.0ppm/Volt at 1000M 8.0ppm/Volt at 1000M Ambient Temperature Range (C): -55 to 125 -55 to 125 -55 to 125 Long Term Damp Heat (%): 0.25% 0.25% 0.25% (Steady state 56 Days 95% RH at 40C) Noise (Quantech) Dependent -20dB (0.1 V/V) at lower values on Resistor Type and Value: +10dB (3.3 V/V) at higher values Encapsulation: Epoxy coating (Optional) Solvent Resistance: Print will withstand the action of all commonly used industrial solvents. Lead Material: Tinned copper wire Lead Length: Minimum 20mm Lead Diameter: Nominal 0.6 0.05mm 1773310 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change.High Value / High Voltage Resistors Type HB Series Dimensions - Type HBA, HB1 & HB3 (Radial) Type HB1 & HB3 (Axial) C B F A D G H E Type A B C D E F G H I Uncoated 10.2 7 1.75 60.2 5.0 HBA Epoxy Coated 12.5 8 2.6 60.5 5.0 Uncoated 8.4 26 1.5 33.8 22.9 26 66 1.5 8.4 HB1 Epoxy Coated 10.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2 Uncoated 8.4 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4 HB3 Epoxy Coated 10.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6 Derating Curve Surface Temperature Rise 100 4.5 HB3 90 4 HBA HB1 HB3 80 3.5 70 3 60 2.5 50 HB1 2 40 1.5 30 HBA 1 20 0.5 10 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 20 40 60 80 100 120 140 Power Dissipation (Watts) Ambient Temperature (degC) How to Order HB 3 1K0 J Z R E Common Part Power Rating Resistance Value Tolerance Temp. Coefficient Lead Style Coating Styles 70C of Resistance 1Kohm (1000) R - Radial Leads F - 1% HB- High Value / A - 0.4W 1K0 E - Epoxy A - Axial Leads High Voltage G - 2% Blue Coating 1 - 1.0W Z - 100ppm 1Mohm (HB1, HB3 only for Resistor J - 5% (1000000) Axial Leads) 3 - 2.0W 1M0 TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili- ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Power (W) Surface Temp. Rise (C)