Z-PACK TinMan 85 ohm High Speed Backplane Connector Z-PACK TinMan 85 ohm Connector Overview Product Facts 10+ Gbps performance 85 ohm impedance for differential pair configuration 5 pair version offers 26 pairs/10mm 66 differential pairs/inch fitting within a 25.40 1.00 card slot pitch 3 pair version offers 16 pairs/10mm 40 differential pairs/inch fitting within a 16.25 .625 card slot pitch Right angle pin headers (coplanar) in 3 pair and 5 pair versions Vertical receptacles (mezzanine) in 5 pair Increasing system perform- As part of the complete Technical Documents version ance is a continuous chal- Z-PACK TinMan connector Product Specification 108-2303-1 lenge within the product family, the 85 ohm High speed cable Application Specification interconnection channel. version offers protected assemblies and hardware 114-13243 One design approach gain- right-angle and vertical Routing Guide Report 27GC001-1 Reliable, redundant ing momentum in the indus- receptacles for use on contact design on every Material and Finish try is the reduction of the daughtercards and mezza- signal contact Signal Contact High Strength system characteristic nine boards where handling Copper Alloy Modular system offered in impedance from 100 ohm to damage can be a concern various column versions Ground Contact High Strength 85 ohm. Such a reduction of when plugging to a mating Copper Alloy impedance from 100 ohm to header. Ground contacts Meets industry reliability Housing Liquid Crystal Polymer, 85 ohm can improve overall strategically positioned requirements of UL 94V-0 Rated system performance by within each column of the Bellcore/Telcordia Platings Telcordia compliant incorporating thinner PC connector, combined with Sequencing for ground interface, Nickel underplate boards, increasing density unique contact lead frame and signal contacts Compliant Pin Plating with same board thickness arrangements, enable the RoHS Compliant and making it easier to Z-PACK TinMan 85 ohm RoHS compliant match the system imped- connector to achieve low Ratings ance to the connector foot- crosstalk and high through- Temperature Range print impedance. put performance levels. -65C to +90C A dual point of contact Tyco Electronics is leading Current Rating 0.5 A/contact mating interface and the way in providing a com- < 30C T-Rise compliant pin interface to plete interconnect solution Durability 200 cycles printed circuit board help for this emerging market. Dielectric Withstanding Voltage provide reliability. The suite of Z-PACK TinMan 560 VAC 85 ohm connectors pro- Operating Voltage 250 VAC max. vides the same industry Industry Applications Signal Integrity leading performance and Characteristic Impedance features and benefits The Z-PACK TinMan 85 ohm Differential 85 ohms 10% designed into the standard connector family is designed Crosstalk Multi-pair differential 100 ohm Z-PACK TinMan for the cost pressured, high crosstalk: 2.1% 50ps connector system but in an performance, high signal Insertion Loss -2 dB 10 GHz 85 ohm impedance pack- density, blade and rack age. This connector was mount server applications designed to provide 85 ohm implementing an 85 ohm nominal characteristic system impedance. impedance through the entire connector, from PCB footprint to PCB footprint. Note: All part numbers are For additional information visit: TELCORDIA is a trademark of Telcordia RoHS compliant. Z-PACK TinMan 85 Ohm High Speed, High Density Backplane Connector 5 Pair Right Angle Receptacle Assemblies (85 ohm) Dimension Application Column Part Number Mates With Tooling A B 15.35 13.30 1934947-1, 2065053-1, 2065305-1, 8 1934954-1 * .604 .524 2065307-1, 1934948-1, 1934985-1, 2065739-1, 2065738-1 19.15 17.10 1934822-1, 2065027-1, 2065309-1 10 1934932-1 * .754 .673 2065311-1, 1934937-1, 2065025-1, 2065740-1, 2065741-1 30.55 28.50 2065054-1, 2065055-1, 2065329-1, 16 2065042-1 * 1.203 1.122 2065331-1, 1934986-1, 1934987-1 2065748-1, 2065749-1 * Custom tooling not required. Utilizes flat-rock insertion tooling. Reference Application Specification 114-13243. 0.05 .002 Note: For additional information * Finished Hole Diameter = 0.46 .018 0.02 .001 on pcb routing guidelines, Drilled Hole Diameter = 0.55 .022 0.013 .0005 reference the Z-PACK TinMan Copper Thickness = 0.038 .0015 0.004 .0002 Connector Routing Guide Tin-Lead Thickness = 0.008 .0003 Report 27GC001-1. Finishes other than Tin-Lead, See Appl. Spec. 114-13243 Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in press-fit connectors. 2 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 06-09 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208