1SNK516150R0000 TE Connectivity

Technical Datasheet Catalogue Page 1SNK 161 020 D0201 1SNK 161 020 S0201 ZS35-PE Screw Clamp Terminal Block 35 mm 0 AWG Ground 16 mm 0.630 in Spacing Features and Benefits 59 2.32 Reliable electrical and mechanical contact with the rail that exceeds the requirements of IEC 60947-7-2 terminal block standard. 34 1.34 3D CAD outline drawings available onControl Product 3 portal (ing) Ordering Details Type Order Code EAN Code Pack Weight g (1 pce) Green-Yellow ZS35-PE 1SNK 516 150 R0000 3472595161508 20 81.80 Declarations and Certificates Document Part Number UE Directive 1SND 225 094 C1003 CE Third Party Certificate 1SND 161 027 A0200 CB RoHS 1SND 230 491 F0203 RoHS Atex Declaration 1SND 225 085 C1003 1 63.3 2.49 General Information The following information must be strictly adhered to in order to guarantee the terminal block electrical, mechanical and environmental performance. Protection IP 20 NEMA 1 Rail DIN3-TH35 Wire stripping length 17 mm 0.669 in Screw clamp Screw rail contact (Maximum value) Flat screwdriver Operating tool 6.5 mm 0.256 in 5.5 mm 0.217 in 2.65 Nm 23.5 lb.in 1.6 Nm 14.2 lb.in Torque 0.15 Nm 1.33 lb.in 0.15 Nm 1.33 lb.in Mechanical endurance of disconnect system Material Specifications Insulating material Polyamide IRC 600 V Flammability UL94 V0 NF F 16 101 I2F2 Needle flame test IEC 60695-11-5 Compliant Connecting capacity per clamp 1 Rigid conductor 6-35 mm 10-0 AWG 1 Flexible conductor without ferrule 6-35 mm 10-0 AWG 1 Flexible conductor with ferrule Ferrule maximum outer diameter 14 mm 0.551 in Multi Connecting capacity per clamp 2 Rigid conductors 2 Flexible conductors without ferrule 2 Flexible conductors with twin ferrule Don t mix solid and flexible conductors in the same clamp Don t mix solid or flexible conductors of different sizes in the same clamp TheConnecting capacity with ferrule data is guaranteed with ABB crimping tool PS-3 Cross section Rated cross section 35 mm 0 AWG Maximum Cross section Manufacturer data 35 mm Manufacturer data 0 AWG Gauge A9 / 10 mm / 0.394 in / IEC 60947-7-1 Electrical characteristics Current Rated current IEC 60947-7-1 Field and factory wiring Cat.2 UL 1059 Factory wiring Cat.1 UL 1059 CSA-C-22.2 n 158 Rated short-time withstand current 1 s (Icw) 4200 A Short-time withstand current 0.5 s Manufacturer data 5 s Manufacturer data 10 s Manufacturer data 30 s Manufacturer data 1 mn Manufacturer data Rated short circuit withstand CSA-C-22.2 n 158 Max. current (45 temperature increase) / Max. cross section (mm) Manufacturer data 35 mm Maximum short circuit current (1s) Manufacturer data 4200 A 2