ASSY USED ON: CODE 54 - LOW PROFILE HEAT SHRINK BOOT BACKSHELL 201M916-19C SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-201M916-19B YYWW). 4. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 5. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 6. THIS PRODUCT IS A FUNCTIONAL EQUIVALENT OF SAE-AS85049/60-2. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 18/02/2015 NOT TO CHECKED 18/02/2015 SCALE LOW PROFILE HEAT SHRINK BOOT UNLESS OTHERWISE SPECIFIED APPROVED BACKSHELL(CODE 54) K.SHEPPARD 25/02/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 20/08/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III K 03/06/2015 I.MYONG REVISED PER ECO-15-003652 L REVISED PER ECO-15-012000 20/08/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 201M9XX L 1 POLAMCO/TE CAGE CODE: U5792ASSY USED ON: MEDIUM DIAMOND KNURL A-A 13,70 MAX A STAINLESS STEEL & BRONZE TEETH VIEW PART MARK 3,56 HERE 3,30 0,00 + 3,17 A - 0,50 TABLE 1 X BASE PART SHELL SIZE A B Z Y +0,20/-0,00 NUMBER 4 5 THREAD MAX MIN MAX 201M903 3 9/16 -24UNEF 18,0 6,5 19,1 1,12 16,6 6,6 17,4 1,12 201M908 8 & 8S 1/2 -20UNF 201M910 5/8 -24UNEF 19,6 9,3 20,4 1,12 10, 10S & 10SL 22,7 12,8 23,8 1,12 201M912 7 3/4 -20UNEF 12 & 12S 201M914 12 7/8 -20UNEF 25,9 14,7 27,0 1,12 14 & 14S 201M916 19 1 -20UNEF 29,2 17,8 31,4 1,75 16 & 16S 31,5 19,8 33,2 1,75 201M918 27 18 1 1/16 -18UNEF 201M920 37 1 3/16 -18UNEF 34,7 23,0 36,4 1,75 20 36,6 26,2 39,6 1,75 201M922 22 1 5/16 -18UNEF 201M924 1 7/16 -18UNEF 41,0 29,1 42,8 1,75 24 50,0 34,9 52,4 2,18 201M928 1 3/4 -18UNS 28 201M932 2 -18UNS 56,4 41,4 58,3 2,18 32 201M936 2 1/4 -16UN 62,7 46,6 65,1 2,18 36 69,1 52,1 71,4 2,18 201M940 40 2 1/2 -16UN 201M944 2 3/4 -16UN 75,4 58,6 77,4 2,18 44 81,8 64,9 84,1 2,18 201M948 3 -16UN 48 201M961 61 1 1/2 -18UNEF 42,0 30,0 44,4 1,75 DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 18/02/2015 NOT TO CHECKED 18/02/2015 SCALE LOW PROFILE HEAT SHRINK BOOT UNLESS OTHERWISE SPECIFIED APPROVED BACKSHELL(CODE 54) K.SHEPPARD 25/02/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 20/08/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III K 03/06/2015 I.MYONG REVISED PER ECO-15-003652 L REVISED PER ECO-15-012000 20/08/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 201M9XX L 2 POLAMCO/TE CAGE CODE: U5792 B A THREAD XXXX Z X Y