ASSY USED ON:
CODE 54 - LOW PROFILE
HEAT SHRINK BOOT BACKSHELL
201M916-19C
SERIES
ORDER NUMBER (TABLE 1)
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004
MODIFICATION CODE
REFER TO CH00-0250-004 2
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-201M916-19B YYWW).
4. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L
5. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W,
MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472,
MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723,
SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13,
/14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69,
/70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98,
(MS3155 CONTROLLED INTERFACE).
6. THIS PRODUCT IS A FUNCTIONAL EQUIVALENT OF SAE-AS85049/60-2.
DATE
3RD ANGLE
DRAWN K.WINCZURA
TITLE:
PROJECTION
18/02/2015
NOT TO
CHECKED 18/02/2015 SCALE LOW PROFILE HEAT SHRINK BOOT
UNLESS OTHERWISE SPECIFIED
APPROVED BACKSHELL(CODE 54)
K.SHEPPARD 25/02/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 20/08/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III
K 03/06/2015 I.MYONG
REVISED PER ECO-15-003652
L REVISED PER ECO-15-012000 20/08/2015
H.SMITH
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
201M9XX L 1
POLAMCO/TE CAGE CODE: U5792ASSY USED ON:
MEDIUM DIAMOND
KNURL
A-A
13,70 MAX
A
STAINLESS
STEEL & BRONZE
TEETH VIEW
PART MARK
3,56
HERE
3,30
0,00
+
3,17
A - 0,50
TABLE 1
X
BASE PART SHELL SIZE A B Z Y
+0,20/-0,00
NUMBER 4 5 THREAD MAX MIN MAX
201M903 3 9/16 -24UNEF 18,0 6,5 19,1 1,12
16,6 6,6 17,4 1,12
201M908 8 & 8S 1/2 -20UNF
201M910 5/8 -24UNEF 19,6 9,3 20,4 1,12
10, 10S & 10SL
22,7 12,8 23,8 1,12
201M912 7 3/4 -20UNEF
12 & 12S
201M914 12 7/8 -20UNEF 25,9 14,7 27,0 1,12
14 & 14S
201M916 19 1 -20UNEF 29,2 17,8 31,4 1,75
16 & 16S
31,5 19,8 33,2 1,75
201M918 27 18 1 1/16 -18UNEF
201M920 37 1 3/16 -18UNEF 34,7 23,0 36,4 1,75
20
36,6 26,2 39,6 1,75
201M922 22 1 5/16 -18UNEF
201M924 1 7/16 -18UNEF 41,0 29,1 42,8 1,75
24
50,0 34,9 52,4 2,18
201M928 1 3/4 -18UNS
28
201M932 2 -18UNS 56,4 41,4 58,3 2,18
32
201M936 2 1/4 -16UN 62,7 46,6 65,1 2,18
36
69,1 52,1 71,4 2,18
201M940 40 2 1/2 -16UN
201M944 2 3/4 -16UN 75,4 58,6 77,4 2,18
44
81,8 64,9 84,1 2,18
201M948 3 -16UN
48
201M961 61 1 1/2 -18UNEF 42,0 30,0 44,4 1,75
DATE
3RD ANGLE
DRAWN K.WINCZURA
TITLE:
PROJECTION
18/02/2015
NOT TO
CHECKED 18/02/2015 SCALE LOW PROFILE HEAT SHRINK BOOT
UNLESS OTHERWISE SPECIFIED
APPROVED BACKSHELL(CODE 54)
K.SHEPPARD 25/02/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 20/08/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-26482 SERIES II, MIL-DTL-83723 SERIES I & III
K 03/06/2015 I.MYONG
REVISED PER ECO-15-003652
L REVISED PER ECO-15-012000 20/08/2015
H.SMITH
TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
201M9XX L 2
POLAMCO/TE CAGE CODE: U5792
B
A THREAD
XXXX
Z
X
Y