General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar (2.1mm gap) n 1 pole 35A, 1 form A (NO) contact n Contact gap > 2.1mm (suffix T) 1) n 350mW hold power n Ambient temperature up to 85C at 35A n Product in accordance to IEC 60335-1 Typical applications Electrical vehicle loading stations Electrical vehicle Photovoltaic inverter Approvals Insulation Data TUV R50369970 Initial dielectric strength (1 minute) between open contacts 2500V rms between contact and coil 4000V rms Contact Data Initial surge withstand voltage Contact arrangement 1 form A (NO) between contact and coil 6kV (1.2 /50 uS) Contact gap >2.1mm Initial insulation resistance (at 500VDC) 9 Rated voltage 277VAC (2.1mm gap) between open contacts 1x10 2) 9 Rated current 35A between contact and coil 1x10 Switch capacity max. 35A 277VAC Clearance/creepage Contact material Ag alloy (Cd free) between contact and coil 4.2/5.6mm Initial contact resistance 75m max. at 1A 6VDC Material group of insulation parts III 3m max. at 20A Tracking index of relay base PTI 325 -1 Frequency of operation, with/without load 6/300min Flame resistance of plastic parts UL94 V-0 Operate/release time max., incl bounce time 18/15ms 2) Contact ratings Other Data Type Contact Load Cycles Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content TUV refer to the Product Compliance Support Center at 3 T9SV1K18-12T A (NO) 35A, 277VAC, resistive, room Temp. 30x10 www.te.com/customersupport/rohssupportcenter 2) Internal test Ambient temperature -40 to +85C 3 T9SV1K18-12T A (NO) 35A, 250VAC, resistive, 85C 1x10 Category of environmental protection 5 Mechanical endurance, DC coil 5x10 IEC 61810 RTII - flux proof Vibration resistance (functional) 10~50HZ double amplitude 1mm Coil Data Vibration resistance (destructive) 10~50HZ Rated coil voltage 12VDC double amplitude 1.5mm Coil insulation system according UL Class F Shock resistance (functional) 10g Shock resistance (destructive) 100g Coil versions, DC coil Terminal type PCB-THT 2) Coil Rated Operate Release Coil Rated coil Hold Mounting see note Code Voltage Voltage Voltage Resistance Power Voltage Mounting distance 10mm VDC VDC VDC 10% W VDC Weight appr. 30g 1) 4) 12 see note 9.6 0.8 64 2.25 min./ 4.7Min. Resistance to soldering heat THT 4) 0.35 Hold 6.0Min. IEC 60068-2-20 260C/5s All figures are given for coil without pre-energization, at ambient temperature +23C. Packaging unit box/500 pcs. 1) Rated Voltage: 12VDC. After the energization time of 100ms with 12 VDC the coil requires a reduction of the coil voltage to 4.7... 6.0 VDC. 2) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 3) Contact ratings with relay properly vented. 4) The temperature of hold voltage: 4.7 VDC Min. at room temperature, and 6 VDC Min. at 85C. 1 08-2019, Rev. 0819 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar (2.1mm gap) (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins Note: 1) General tolerance Diagram Dimension Tolerance < 1 mm 0.1 1 ~ 3 mm 0.2 > 3 mm 0.3 2) Dimensions of the pins after tin soldering a) +0.4 for the width and the thickness b) +1.0 for the length Product code structure Typical product code T9S V 1 K 1 8 -12 T Type T9S Power Relay T9S Series Enclosure V Flux-proof plastic case S Wash tight Contact arrangement 1 1 Form A (1NO) Coil input K DC coil, 2.25W Mounting and termination 1 PCB mounting PCB terminals for coil and contacts Contact material 8 Ag alloy Coil voltage Coil code: Please refer to coil version table Contact gap T 2.1 mm contact gap Product code Version Contact arrangement Contact material Contact gap Coil Part Number T9SV1K18-12T PCB, flux tight 1 form A (NO) contact Ag alloy >2.1mm 12VDC 2027395-7 Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request. 2 08-2019, Rev. 0819 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company