202C653-51/164-0
Heat Shrink Boots, Straight, Molded Part Shape Code 202, Lipped, 51, 20, Adhesive
Pre-Coat, Operating Temperature Range -55 135 C [-67 275 F]
202C653-51/164-0 ACTIVE
Raychem
TE Internal #: 631937-000
Heat Shrink Boots, Straight, Molded Part Shape Code 202, Lipped,
51, 20, Adhesive Pre-Coat, Operating Temperature Range -55 135
C [-67 275 F]
View on TE.com>
Harnessing > Heat Shrink Components > Heat Shrink Boots
Molded Part Shape: Straight
Molded Part Shape Code: 202
Lipped: Yes
Material Code: 51
Heat Shrink Boot Material Systems Code: 20
Features
Product Type Features
Molded Part Shape Straight
Configuration Features
Lipped Yes
Body Features
Material Code 51
Heat Shrink Boot Material Systems Code 20
Adhesive Pre-Coat Yes
Material Modified Fluoro-Elastomer
Dimensions
Wire/Cable Outside Diameter 1 in, 1.02 in, 1.1 in, 1.18 in, 1.26 in, 1.34 in,
1.42 in, 26 mm, 28 mm, 30 mm, 32 mm, 34
mm, 36 mm
Cable Diameter Range 22.4 43 mm[.882 1.693 in]
Usage Conditions
Operating Temperature Range -55 135 C[-67 275 F]
Operation/Application
Power Cable Accessory No
Industry Standards
Approved Standards SC-X-15112
01/31/2021 06:08PM | Page1
For support call+1 800 522 6752
202C653-51/164-0
Heat Shrink Boots, Straight, Molded Part Shape Code 202, Lipped, 51, 20, Adhesive
Pre-Coat, Operating Temperature Range -55 135 C [-67 275 F]
Approved Standards SC-X-15112
Government Qualified No
Other
Molded Part Shape Code 202
Fluid/Chemical Resistance Suitable for long term fluid immersion &
elevated temperatures including fuel
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Compliant
EU ELV Directive 2000/53/EC Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUN 2020
(209)
Candidate List Declared Against: JUN 2020
(209)
Does not contain REACH SVHC
Halogen Content Not Low Halogen - contains Br or Cl > 900
ppm.
Solder Process Capability Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides
on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on
requirements for substances in articles posted at this URL: