202D142-12-0 TE Part 811108-000 TE Internal : 202D142-12-0 202D142-12-0 ACTIVE Raychem TE Part 811108-000 TE Internal : 202D142-12-0 View on TE.com> Harnessing > Heat Shrink Components > Heat Shrink Boots Molded Part Shape: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 12 Material Systems Code: 200 Features Product Type Features Molded Part Shape Straight Configuration Features Lipped Yes Body Features Material Code 12 Material Systems Code 200 Adhesive Pre-Coat No Material Modified Fluoro-Elastomer Dimensions Wire/Cable Outside Diameter .3 in, .31 in, .35 in, .39 in, .43 in, .433 in, 10 mm, 11 mm, 8 mm, 9 mm Cable Diameter Range 7.1 16 mm 7.1 17 in Usage Conditions Operating Temperature Range -55 200 C -67 392 F Operation/Application Power Cable Accessory No Industry Standards Approved Standards BS-G-198-5-DD, DEF Std 59-97 Issue 3 Type DD, SAE AS I 81765/4 Government Qualified No 09/01/2019 08:02AM Page1 For support call+1 800 522 6752 202D142-12-0 TE Part 811108-000 TE Internal : 202D142-12-0 Government Qualified No Other Molded Part Shape Code 202 Fluid/Chemical Resistance Long-Term Immersion at High Temperature Adhesive Options S1255-04 Separate Adhesive Adhesive Type Adhesive Purchased Separately Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2019 (197) Candidate List Declared Against: JAN 2019 (197) Halogen Content Low Bromine/Chlorine - Br and Cl < 900 ppm per homogenous material. Also BFR /CFR/PVC Free Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be updating its statements accordingly. Compatible Parts 09/01/2019 08:02AM Page2 For support call+1 800 522 6752