202D142-4/42-0 Heat Shrink Boots, 180 , Molded Part Shape Code 202, Lipped, 4, 10, Adhesive Pre- Coat, Operating Temperature Range -55 135 C -67 275 F 202D142-4/42-0 ACTIVE Raychem TE Internal : 814342-000 Heat Shrink Boots, 180 , Molded Part Shape Code 202, Lipped, 4, 10, Adhesive Pre-Coat, Operating Temperature Range -55 135 C -67 275 F View on TE.com> Wire Protection & Management > Heat Shrink Molded Shapes > Heat Shrink Boots > Bulbous Heat Shrink Boots: Lipped, Straight Molded Part Angle: 180 Molded Part Shape Code: 202 Lipped: Yes Material Code: 4 Heat Shrink Boot Material Systems Code: 10 All Bulbous Heat Shrink Boots: Lipped, Straight (487) Features Product Type Features Molded Part Angle 180 Configuration Features Lipped Yes Body Features Material Code 4 Heat Shrink Boot Material Systems Code 10 Adhesive Pre-Coat Yes Material Polyolefin Flexible Modified Dimensions Wire/Cable Outside Diameter .3 in, .31 in, .35 in, .39 in, .43 in, .433 in, .47 in, .55 in, 10 mm, 11 mm, 12 mm, 14 mm, 8 mm, 9 mm Cable Diameter Range 7.1 16 mm 7.1 16 in Usage Conditions Operating Temperature Range -55 135 C -67 275 F Operation/Application Power Cable Accessory No Industry Standards 08/19/2021 10:32PM Page1 For support call+1 800 522 6752 202D142-4/42-0 Heat Shrink Boots, 180 , Molded Part Shape Code 202, Lipped, 4, 10, Adhesive Pre- Coat, Operating Temperature Range -55 135 C -67 275 F Industry Standards Approved Standards SAE AS I 81765/1, Type II, UL 224, File E85381 Government Qualified No Other Molded Part Shape Code 202 Fluid & Chemical Resistance Occasional exposure to fluids Adhesive Type General Purpose Pre-Coat Adhesive Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JAN 2021 (211) Does not contain REACH SVHC Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: