202D196-3/86-0
TE Part # F13325-000
TE Internal #: 202D196-3/86-0
202D196-3/86-0 ACTIVE
Raychem
TE Part # F13325-000
TE Internal #: 202D196-3/86-0
View on TE.com>
Harnessing > Heat Shrink Components > Heat Shrink Boots
Molded Part Shape: Straight
Molded Part Shape Code: 202
Lipped: Yes
Material Code: 3
Material Systems Code: 10
Features
Product Type Features
Molded Part Shape Straight
Configuration Features
Lipped Yes
Body Features
Material Code 3
Material Systems Code 10
Adhesive Pre-Coat Yes
Material Semi-Rigid Modified Polyolefin
Dimensions
Inside Diameter as Supplied 81.8 mm[3.22 in]
Usage Conditions
Operating Temperature Range -55 135 C[-67 275 F]
Operation/Application
Power Cable Accessory No
Industry Standards
Approved Standards SAE AS81765/1 Type I
Government Qualified No
Other
Molded Part Shape Code 202
09/01/2019 01:23PM | Page1
For support call+1 800 522 6752
202D196-3/86-0
TE Part # F13325-000
TE Internal #: 202D196-3/86-0
Molded Part Shape Code 202
Fluid/Chemical Resistance Occasional exposure to fluids
Adhesive Type High Performance Pre-Coat Adhesive
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Compliant
EU ELV Directive 2000/53/EC Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2019
(197)
Candidate List Declared Against: JAN 2019
(197)
Halogen Content Not Low Halogen - contains Br or Cl > 900
ppm.
Solder Process Capability Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for
substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
based on the new ECHA Guidance on requirements for substances in articles (June 2017, version 4.0) and will be
updating its statements accordingly.
Compatible Parts
TE Part # CJ2087-000
HL2010E-KIT-120V
09/01/2019 01:23PM | Page2
Customers Also Bought
For support call+1 800 522 6752