202M110-19A TE Connectivity

ASSY USED ON: CODE 41 - LOW PROFILE HEAT SHRINK BOOT BACKSHELL 202M112-19B- SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. ADAPTOR TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-202M112-19B). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER S OPTION. 5. BACKSHELL MATES TO MIL-C-38999 SERIES I & II, CLASS E & T, MS27466, MS27467, MS27468, MS27472, MS27473, MS27474, MS27479, MS27480, MS27481, MS27484, MS27497, MS27652, MS27653, MS27656 CONNECTORS. DATE 3RD ANGLE DRAWN W.RUST TITLE: PROJECTION 15/09/2015 NOT TO CHECKED SCALE 15/09/2015 LOW PROFILE, HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 09/10/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 14/10/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES I & II K 03/06/15 REVISED PER ECO-15-003650 I.MYONG L REVISED PER ECO-15-013980 14/10/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 202M1XX L 1 K.SHEPPARDASSY USED ON: MEDIUM DIAMOND KNURL A-A 18,50 10,50 A 3,50 0,10 SILICONE O-RING PART MARK HERE A TABLE 1 SHELL SIZE B Z BASE PART A X Y 5 NUMBER THREAD 0,2 MIN MAX 0,15 SER 1 SER 2 202M108 9 8 7/16-28UNEF 17,5 1,2 18,0 6,8 10 20,5 1,2 21,5 10,3 202M110 11 9/16-24UNEF 23,5 1,2 24,5 13,1 202M112 13 12 11/16-24UNEF 25,5 1,2 27,5 16,3 202M114 15 14 13/16-20UNEF 30,5 1,2 32,5 19,5 202M116 17 16 15/16-20UNEF 33,5 1,2 35,5 21,9 202M118 19 18 1 1/16-18UNEF 202M120 21 20 1 3/16-18UNEF 36,5 1,8 38,5 25,1 202M122 23 22 1 5/16-18UNEF 40,0 1,8 42,0 28,3 202M124 25 24 1 7/16-18UNEF 43,0 1,8 45,0 31,5 DATE 3RD ANGLE DRAWN W.RUST TITLE: PROJECTION 15/09/2015 NOT TO CHECKED SCALE 15/09/2015 LOW PROFILE, HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 09/10/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 14/10/2015 ANGULAR +/- 1 REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES I & II K 03/06/15 REVISED PER ECO-15-003650 I.MYONG L REVISED PER ECO-15-013980 14/10/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD TE CAGE CODE: 06090 INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. POLAMCO/TE CAGE CODE: U5792 202M1XX L 2 K.SHEPPARD B A THREAD XXXX Z X Y