RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 16,66 0,656 PCB EDGE LP 15,88 0,625 1 8 L.E.D. 2 L.E.D. 1 10,89 0,429 11,43 0,13 0,450 0,005 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5) NOTE 3: PIN 7 PAD TO BE UNDERSIZED TO MEET ISOLATION REQUIREMENT NOTE 4: RoHS COMPLIANT PRINTR WITH DATE CODE LED 1 RIGHT LED 2 LEFT LED PART NO. LED 1 RECHTE IDENT. NR. LED 2 LINK CODE YELLOW GREEN L1 203318 GREEN YELLOW L2 203319 GREEN GREEN L3 203320 GREEN RED L4 203321 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK ORANGE/GREEN ORANGE/GREEN L9 203322 SHIELDING: Cu ALLOY, PLATED WITH Ni Information: Tolerances Scale 2:1 CONTACTS: PHOSPHOR BRONZE SCHEMATIC NUMBER: M6A01 All Dimensions CONTACT FINISH: Au, 0.8 m (30 in), OVER Ni in mm in TERMINAL FINISH: Sn MATTE Designation All rights reserved. Only for Information. Subject to modification without LED LENS: EPOXY MOD JACK - MJIM To insure that this is the latest prior notice. MECHANICAL CHARACTERISTICS version of this drawing, please Drawing will not be updated. 8C10T, 1x1, INT. MAG., LED ALIGNED DURABILITY: 1000 MATING CYCLES contact one of the ERNI companies before using. ELECTRICAL CHARACTERISTICS I (1/2) www.ERNI.com 203317 OPERATING TEMPERATURE: 0C TO 55C D 11.01.2008 A3 Index Date Class MJIM Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 21,59 0,850 MAX 3,05 0,50 0,120 0,020 0,38 0,10 0,015 0,004 14,72 0,580 13,63 0,537ELECTRICAL SCHEMATIC - M6A01 10/100 BASE TX WITH REMOTE POWER ELEKTRISCHER SCHALTPLAN PCB CABLE TD+ P1 J1 TX+ CT P4 TD- P2 J2 TX- RD+ P3 J3 RX+ CT P5 RD- P6 J6 RX- 2X 1000pF/2KV GND P7 2X 75 N/C P8 PW+ P9 PW- P10 J4,5 J7,8 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL 0.05 .002 UNLESS NOTED 1,27 0,050 0,64 0,025 2,54 0,100 1 0,89 0,07 0,035 0,003 x10 10 1,60 0,07 0,063 0,003 x2 3,25 0,07 0,128 0,003 x2 13 14 11 12 1,02 0,07 0,040 0,003 x4 8,18 0,322 11,43 0,450 13,26 0,522 15,49 0,610 LED SPECIFICATIONS LED ANWEISUNG V V I COLOR CIRCUIT DIAGRAM ff f MAGNETICS SPECIFICATIONS 25C FARBE mA SCHALTSKIZZE TYP MAX TURNS RATIO: 1CT : 1CT 3% 11 12 13 14 (P1-P2 : J1-J2) YELLOW 2.1 2.5 20 (P3-P6 : J3-J6) 11 12 13 14 OCL(100 KHz, 0.1 Vrms, 8 mA) GREEN 2.2 2.5 20 (P1-P2 : P3-P6) 350H MIN 11 12 13 14 DCR (P1-P2, P3-P6) 0.9 OHMS MAX RED 2.25 2.5 20 INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX 11 12 13 14 ORANGE/GREEN 2.05/2.2 2.5 20 G G RETURN LOSS: 0.5 - 30 MHz -18 dB MIN N N 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN Information: Tolerances Scale 2:1 60 - 80 MHz -12 dB MIN All Dimensions CROSSTALK: in mm in 1-100 MHz -38 dB TYP Designation All rights reserved. CMR: Only for Information. Subject to modification without MOD JACK - MJIM To insure that this is the latest prior notice. 0.1 - 30 MHz -50 dB TYP version of this drawing, please Drawing will not be updated. 30 - 60 MHz -40 dB TYP 8C10T, 1x1, INT. MAG., LED ALIGNED contact one of the ERNI companies 60 - 100 MHz -30 dB TYP before using. I (2/2) ISOLATION 1500 Vrms www.ERNI.com 203317 A3 Class MJIM Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4,06 0,160 3,05 0,120 2,54 0,100 8,89 0,350