203M018-19A12-CS8061 TE Connectivity

AAAASSSSSSSSYYYY UUUUSSSSEEEEDDDD OOOONNNN:::: CODE 54 - BRAID TAIL BACKSHELL 203M016-19B08-L SERIES ORDER NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 ENTRY SIZE (TABLE 2) MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M016-19B08). 4. WHEN ENTRY SIZE EXCEEDSMAX ENTR, A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. WHEN MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 WIRE HOLES, 120 APART. DATE 3RD ANGLE DDRRAAWWNN K.WINCZURA DDRRAAWWNN TTIITTLLEE:: PROJECTION TTIITTLLEE:: 19/01/2015 NOT TO CCCCHHHHEEEECCCCKKKKEEEEDDDD 19/01/2015 SCALE BRAID TAIL BACKSHELL (CODE 54) UNLESS OTHERWISE SPECIFIED AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD K.SHEPPARD 29/01/2015 ALL DIMENSIONS IN MILLIMETRES GGGGEEEENNNNEEEERRRRAAAALLLL TTTTOOOOLLLL LINEAR +/-0,25MM AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD H.SMITH 01/10/2015 ANGULAR +/- 1 RRRREEEEVVVVIIIISSSSIIIIOOOONNNNSSSS LLLLTTTTRRRR DDAATTEE DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN DDAATTEE AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III RRRR 11119999////00002222////2222000011115555 HH..SSMMIITTHH RRRREEEEVVVVIIIISSSSEEEEDDDD PPPPEEEERRRR EEEECCCCOOOO----11115555----000000002222222222225555 HH..SSMMIITTHH SSSS RRRREEEEVVVVIIIISSSSEEEEDDDD PPPPEEEERRRR EEEECCCCOOOO----11115555----000011113333999988880000 00001111////11110000////2222000011115555 HHHH....SSSSMMMMIIIITTTTHHHH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 203M0XX S 1 POLAMCO/TE CAGE CODE: U5792AAAASSSSSSSSYYYY UUUUSSSSEEEEDDDD OOOONNNN:::: IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 16,80 0,50 23,50 MAX 152,40 MIN STAINLESS STEEL TEETH VIEW 25,50 152,40 MIN TINNED COPPER PART MARK 4 SHIELD HERE TINNED COPPER PART MARK SHIELD HERE STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 TABLE 2 TABLE 1 ENTRY K Z Y ORDER SHELL SIZE B MAX A THREAD SIZE MAX REF REF NUMBER 6 7 MAX ENTRY 03 NA 4,77 13,1 03 3 9/16-24 UNEF 17,0 04 15,6 04 NA 6,35 13,1 08 8 & 8S 1/2-20 UNF 04 21,0 7,92 13,1 10 10 10, 10S, 10SL 5/8-24 UNEF 18,6 06 05 06 21,0 9,52 17,9 12 7 12 & 12S 3/4-20 UNEF 21,7 08 21,0 11,12 17,9 24,9 07 14 12 14 & 14S 7/8-20 UNEF 09 08 24,5 12,70 17,9 16 19 16 & 16S 1-20 UNEF 28,2 11 24,5 14,27 17,9 30,9 09 18 27 18 1 1/16-18 UNEF 12 10 29,0 15,87 24,2 20 37 20 1 3/16-18 UNEF 34,1 14 37,3 11 29,0 17,47 24,2 22 22 1 5/16-18 UNEF 16 32,5 19,05 24,2 24 1 7/16-18 UNEF 40,4 18 12 24 13 35,5 20,62 24,2 28 28 1 3/4-18UNS 50,0 22 35,5 22,23 30,6 56,3 14 32 32 2-18 UNS 24 15 37,0 23,82 30,6 36 36 2 1/4-16 UN 62,7 28 37,0 25,40 30,6 69,0 16 40 40 2 1/2-16 UN 28 17 40,0 26,98 33,2 44 44 2 3/4-16 UN 75,4 28 81,7 18 40,0 28,60 33,2 48 48 3-16UN 28 43,5 31,80 42,0 61 1 1/2-18 UNEF 42,0 18 20 61 21 48,5 33,34 42,0 48,5 35,00 42,0 22 24 52,1 38,10 42,0 58,5 44,45 49,0 28 DATE 3RD ANGLE DDRRAAWWNN K.WINCZURA DDRRAAWWNN TTIITTLLEE:: PROJECTION TTIITTLLEE:: 19/01/2015 NOT TO CCCCHHHHEEEECCCCKKKKEEEEDDDD 19/01/2015 SCALE BRAID TAIL BACKSHELL (CODE 54) UNLESS OTHERWISE SPECIFIED AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD K.SHEPPARD 29/01/2015 ALL DIMENSIONS IN MILLIMETRES GGGGEEEENNNNEEEERRRRAAAALLLL TTTTOOOOLLLL LINEAR +/-0,25MM AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD H.SMITH 01/10/2015 ANGULAR +/- 1 RRRREEEEVVVVIIIISSSSIIIIOOOONNNNSSSS LLLLTTTTRRRR DDAATTEE DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN DDAATTEE AAAAPPPPPPPPRRRROOOOVVVVEEEEDDDD MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III RRRR 11119999////00002222////2222000011115555 HH..SSMMIITTHH RRRREEEEVVVVIIIISSSSEEEEDDDD PPPPEEEERRRR EEEECCCCOOOO----11115555----000000002222222222225555 HH..SSMMIITTHH SSSS RRRREEEEVVVVIIIISSSSEEEEDDDD PPPPEEEERRRR EEEECCCCOOOO----11115555----000011113333999988880000 00001111////11110000////2222000011115555 HHHH....SSSSMMMMIIIITTTTHHHH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 203M0XX S 2 POLAMCO/TE CAGE CODE: U5792 B THREAD A XXXX Z Y K B A THREAD XXXX Y Z