ASSY USED ON: CODE 54 - BRAID TAIL BACKSHELL 203M116-19B08-L SERIES DASH NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 ENTRY SIZE (TABLE 2) MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-203M116-19B08). 4. WHEN ENTRY SIZE EXCEEDSMAX ENTR, A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-C-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468, CLASS E & L 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406,MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & III, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. WHEN MODIFICATION IS SPECIFIED, COUPLING NUT SHALL HAVE 3 WIRE HOLES, 120 APART. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 20/04/2015 NOT TO CHECKED 20/04/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 27/04/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 02/09/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III N1 21/06/2012 K.YEE REVISED PER ECO-12-011624 P REVISED PER ECO-15-012672 02/09/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 203M1XX P 1 POLAMCO/TE CAGE CODE: U5792152,40 MIN G 152,40 MIN D ASSY USED ON: IF MAX ENTRY IS EXCEEDED ADAPTER WILL BE SUPPLIED AS TYPE 2 16,80 0,50 F C STAINLESS STEEL TEETH VIEW PART MARK NO PART PART MARK MARK HERE HERE TINNED COPPER SHIELD TINNED COPPER SHIELD 45 - TYPE 1 45 - TYPE 2 TABLE 1 ORDER SHELL SIZE B MAX C D A THREAD 0,5 0,5 NUMBER 6 7 MAX ENTRY 03 9/16-24 UNEF 17,0 04 16,8 16,6 3 15,6 16,6 16,4 08 8 & 8S 1/2-20 UNF 04 10 5/8-24 UNEF 18,6 06 16,8 16,7 10 10, 10S, 10SL 21,7 17,3 17,1 12 7 12 & 12S 3/4-20 UNEF 08 24,9 18,1 17,9 14 12 14 & 14S 7/8-20 UNEF 09 16 1-20 UNEF 28,2 11 19,0 18,7 19 16 & 16S 30,9 19,2 19,0 18 27 18 1 1/16-18 UNEF 12 20 1 3/16-18 UNEF 34,1 14 20,1 19,8 37 20 37,3 20,3 20,1 22 22 1 5/16-18 UNEF 16 24 1 7/16-18 UNEF 40,4 18 21,8 21,5 24 50,0 23,3 22,0 28 1 3/4-18UNS 22 28 32 2-18 UNS 56,3 24 25,0 23,7 32 36 2 1/4-16 UN 62,7 28 26,2 24,9 36 69,0 28,6 26,1 40 40 2 1/2-16 UN 28 44 2 3/4-16 UN 75,4 28 30,1 27,8 44 81,7 31,3 29,0 48 48 3-16UN 28 61 1 1/2-18 UNEF 42,0 18 22,1 21,4 61 TABLE 2 F G ENTRY K Z Y SIZE MAX REF REF 0,5 0,5 4,77 13,1 03 NA NA NA 04 6,35 13,1 NA NA NA 05 21,0 7,92 13,1 12,5 14,5 21,0 9,52 17,9 12,5 14,5 06 07 21,0 11,12 17,9 12,5 14,5 24,5 12,70 17,9 13,1 15,1 08 09 24,5 14,27 17,9 13,1 15,1 10 29,0 15,87 24,2 13,5 16,6 29,0 17,47 24,2 13,5 16,6 11 12 32,5 19,05 24,2 14,5 18,3 35,5 20,62 24,2 15,5 18,8 13 14 35,5 22,23 30,6 15,5 18,8 37,0 23,82 30,6 16,1 19,7 15 16 37,0 25,40 30,6 16,1 19,7 40,0 26,98 33,2 16,5 20,0 17 40,0 28,60 33,2 16,5 20,0 18 20 43,5 31,80 42,0 17,0 22,9 48,5 33,34 42,0 18,5 24,8 21 22 48,5 35,00 42,0 18,5 24,8 52,1 38,10 42,0 21,9 25,8 24 28 58,5 44,45 49,0 25,7 26,4 DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 20/04/2015 NOT TO CHECKED 20/04/2015 SCALE BRAID TAIL BACKSHELL (CODE 54) UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 27/04/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 02/09/2015 ANGULAR +/- 1 REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III N1 21/06/2012 K.YEE REVISED PER ECO-12-011624 P REVISED PER ECO-15-012672 02/09/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 203M1XX P 2 POLAMCO/TE CAGE CODE: U5792 Y Z Z Y B A THREAD XXXX K B READ A TH XXXX