2057004-2 TE Connectivity

Quick Reference Guide RJ point five Connector System The RJ point five connector system is the next generation Ethernet link, offering a higher density cabling solution for Original Equipment Manufacturers (OEMs) who desire a lower cost per port while maintaining the convenience of a single connector per channel. The port spacing is on a 7mm centerline, occupying half the space than that of traditional RJ45 Ethernet link. In addition to the high density receptacle, Tyco Electronics offers the mating cable assembly, as well as cable management solutions for single box and rack configurations. The receptacle and cable assembly were redesigned to eliminate the undesirable RJ45 split pair configuration, resulting in heightened electrical performance. Additionally, the latching feature incorporates an easy-to-use lanyard that will facilitate up to 96 ports on a single line card. Due to the density on the receptacle face, the light from the LEDs is transferred out through the cable boot, bringing the port indicator light closer to the end user. FEATURES AND BENEFITS Approximately double the density offered Product family will support Gigabit speeds of over the standard RJ45 Ethernet link Cat5e UTP cable, and roadmap supports PoE+ Same footprint to support both integrated and 10Gig over Cat6a magnetic and non-integrated solutions Receptacle is a modular design to allow for easy Cable assemblies capable of field termination and rapid deployment of product extensions Cable management features available from Tyco Electronics for higher density configurations www.tycoelectronics.com/products/rjpointfiveRJ point five Connector System Product Applications Mechanical High density Ethenet switching/routing products Port center-on-center spacing at 7mm for Cat5e cabling Data center switching applications: Overall height is 25.25mm Top of rack High density cabling consists of ergonomically friendly End of row lanyard for easy extraction Mid-row Port indicator LEDs conveniently located on the cable Server I/O applications boot to facilitate easy viewing Wiring closet switching products Electrical/Optical Product meets category 5e performance for Magnetic product performs for 10/100/1000BASE-T applications 10/100/1000BASE-T applications Insertion loss 0.4 dB maximum at 100 MHz Insertion loss 1.5 dB maximum at 100 MHz Return loss 20 dB minimum at 100 MHz Return loss 10 dB minimum at 100 MHz NEXT loss 43 dB minimum at 100 MHz Crosstalk 31 dB minimum at 100 MHz FEXT loss 35.1 dB minimum at 100 MHz Common Mode Rejection Ratio 17 dB minimum at 100 MHz Isolation voltage complies with IEEE 802.3 RJ point five Connector Comparison to RJ45* *Drawing not shown to scale 58.5 MM 115.06 mm RJ Point Five Connector RJ45 RJ point five Board Mount Receptacles and Plug Kit Part Number Description Integrated Magnetics LEDs Customer Drawings Product Available 2007669-1 2x8 Receptacle Yes Yes (R/G) Yes Yes 2007669-2 2x8 Receptacle Yes Yes (Y/G) Yes Yes 2057133-1 2x8 Receptacle No Yes (R/G) Yes Yes 2057133-2 2x8 Receptacle No Yes (Y/G) Yes Yes 2007311-1 2x6 Receptacle Yes Yes (R/G) Yes No 2007311-2 2x6 Receptacle Yes Yes (Y/G) Yes No 2057132-1 2x6 Receptacle No Yes (R/G) Yes No 2057132-2 2x6 Receptacle No Yes (Y/G) Yes No 2057004-1 2x12 Receptacle Yes Yes (R/G) Yes Yes 2057004-2 2x12 Receptacle Yes Yes (Y/G) Yes Yes 2057134-1 2x12 Receptacle No Yes (R/G) Yes Yes 2057134-2 2x12 Receptacle No Yes (Y/G) Yes Yes 2057014-1 2x1 Receptacle Yes Yes (R/G) Yes No 2057014-2 2x1 Receptacle Yes Yes (Y/G) Yes No 2057131-1 2x1 Receptacle No Yes (R/G) Yes No 2057131-2 2x1 Receptacle No Yes (R/G) Yes No 2007312-1 Plug Kit -- -- Yes Yes www.tycoelectronics.com/products/rjpointfive RJ point five Connector System I Tyco Electronics