RTY Series Hall-Effect Rotary Position Sensors DESCRIPTION The RTY Series Hall-Effect Rotary Position Sensors provide Eight operating ranges (50, 60, 70, 90, 120, 180, 270 angle monitoring in harsh transportation and industrial and 360) are tolerant to over-travel and allow use in most applications at a competitive cost. common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator Most applications require no lever, and no brackets are shaft over a set operating range. Rotation of the actuator shaft necessary. changes a magnets position relative to the IC. The resulting flux density change is converted to a linear output. Honeywells industry-leading capabilities in research and development provide the customer with known quality and The IC, together with conditioning and protection circuitry, and support. the permanent magnet, is sealed in an IP67-qualified rugged package for durability in most harsh environments. FEATURES AND BENEFITS ( =competitive differentiator) POTENTIAL APPLICATIONS 15 M cycle product life: Provides long life in the Transportation: application Position and movement detection of pedals, throttles, gear Solid-state Hall-effect technology: Provides non-contact shift, levers, steering, linkages, and hitches (trucks, buses, operation, long service life, low torque actuation and off-road vehicles, industrial/construction/agricultural reduces worn-out mechanisms vehicles and equipment, cranes) Rugged IP67-sealed package with integral connector: Suspension displacement/kneeling (buses, trucks) Allows for use in harsh environments Tilt/trim position (boat engines, tilling equipment) Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit: Provides protection against Industrial: installation errors and frequencies in the environment Valve control Industry-standard AMP termination, 32 mm mounting HVAC damper control pitch, North American and European pinout styles, and Irrigation pivot control compact package: Provide drop-in replacement Eight operating ranges up to 360: Provides flexibility in multiple applications, allowing OEMs the range of travel needed for the application RTY Series Table 1. Specifications Characteristic Parameter LV (Low Voltage) HV (High Voltage) Supply voltage 5 0.5 Vdc 10 Vdc to 30 Vdc Supply current 20 mA max. 32 mA max. Supply current (during output to ground short) 25 mA max. 47 mA max. Output 0.5 V to 4.5 V ratiometric 0.5 V to 4.5 V non-ratiometric Output signal delay 4 ms typ. Overvoltage protection 10 Vdc Reverse polarity protection -10 Vdc -30 Vdc Output to ground short circuit protection continuous Output load resistance (pull down to ground) 10 kOhm EMI: radiated immunity 100 V/m from 200 MHz to 1000 MHz per ISO11452-2 conducted immunity 100 mA BCI per ISO11452-4 100 mA BCI per ISO11452-4 from 1 MHz to 200 MHz from 1 MHz to 400 MHz EMC exceeds CE requirements Operating temperature range -40 C to 125 C -40 F to 257 F Storage temperature range -40 C to 125 C -40 F to 257 F Ingress protection IP67 according to DIN 40050 Expected life 15 M cycles Media compatibility heavy transportation fluids Housing material PBT plastic Shock 50 G peak Vibration 20 G peak tested from 10 Hz to 2000 Hz Salt fog concentration 5% 1% for 240 hr per SAE M1455 Section 4.3.3.1 (at 5.0 Vdc. 38 C 100 F ) Resolution 12 bit Mating connector AMP Superseal 282087-1 Mechanical end stop no Approvals CE 2 www.honeywell.com/sensing