211M914-19B TE Connectivity

ASSY USED ON: CODE 30 - HEAT SHRINK BOOT BACKSHELL 211M914-19C-D SERIES SHELL SIZE (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 MODIFICATION CODE REFER TO CH00-0250-004 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004. 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-211M914-19C). 4. KNURL INSIDE BOOT GROOVE MAY BE SUPPLIED AT MANUFACTURER S OPTION. 5. BACKSHELL MATES TO MIL-C-28840, CLASS A, B, C, & E: M28840/10, /11, /14 & /16 CONNECTORS. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 07/05/2015 NOT TO CHECKED 07/05/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 08/05/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 24/06/2015 ANGULAR +/- 1 REVISIONS MIL-C-28840, CLASS A, B. C, & E: M28840/10, /11, /14 & /16 LTR DATE APPROVED DESCRIPTION F CONNECTORS REVISED PER ECN AD93049 G REVISED PER ECO-15-009385 24/06/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 211M9XX G 1 POLAMCO/TE CAGE CODE: U5792ASSY USED ON: 30,00 10,50 3,50 MEDIUM DIAMOND KNURL 4 PART MARK HERE 4 DRAIN HOLES WHEN D MODIFICATION IS SPECIFIED TABLE 1 E BASE PART SHELL SIZE A C D G NUMBER COM L / MIL THREAD MAX MAX +0,20/-0,00 MIN 29,7 18,9 1,12 13,8 211M912 13 / B 7/8 - 20UNEF 211M914 15 / C 1 - 20UNEF 31,3 22,0 1,12 16,9 211M916 17 / D 1 1/8 - 18 UNEF 35,5 24,1 1,12 19,0 38,7 28,0 1,75 22,4 211M918 19 / E 1 1/4 - 18UNEF 211M922 23 / F 1 7/16 -18UNEF 43,6 34,5 1,75 28,4 47,2 36,8 1,75 30,7 211M924 25 / G 1 9/16 -18UNEF 211M928 29 / H 1 7/8 - 16UN 55,2 42,9 1,75 36,8 60,5 47,9 2,20 41,7 211M932 33 / J 2 1/16 -16UN DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 07/05/2015 NOT TO CHECKED 07/05/2015 SCALE HEAT SHRINK BOOT BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 08/05/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 24/06/2015 ANGULAR +/- 1 REVISIONS MIL-C-28840, CLASS A, B. C, & E: M28840/10, /11, /14 & /16 LTR DATE APPROVED DESCRIPTION F CONNECTORS REVISED PER ECN AD93049 G REVISED PER ECO-15-009385 24/06/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 211M9XX G 2 POLAMCO/TE CAGE CODE: U5792 C A THREAD XXXX G E D