2-1393136-9 TE Connectivity

Catalog 1308242 Issued 3-03 P&B CB series CMOS IC Time Delay Relay Choice of timing modes Delay on operate Delay on release Interval on with or without control switch Knob adjustable 10A output relay with SPDT or DPDT contacts Various models time from 0.1 sec. to 100 min. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Contact Data 25C Delay on operate Delay period begins when input voltage is applied. At Arrangements: 2 Form C (DPDT), except 8-pin delay on release model the end of the delay period, the relay will operate and will not release until has 1 Form C (SPDT). input voltage is removed. Reset occurs when input voltage is reapplied. Material: Silver-cadmium oxide alloy. Rating: 10A 30VDC or 277VAC, resistive 1/2 HP 250VAC INPUT ON 1/3 HP 120VAC. VOLTAGE OFF Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. N.O. RELAY ON TIME CONTACTS OFF Delay on release Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. Initial Dielectric Strength When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during Between Open Contacts: 500V rms, 60 Hz. timing by closing the control switch. Between All Other Conductors: 500V rms, 60 Hz. CONTROL ON SWITCH OFF N.O. RELAY ON TIME CONTACTS OFF Input Data 25C Interval on (without control switch) The relay energizes and timing begins when input voltage is applied. At the end of the time delay period Voltage: 24 and 120VAC, and 12 and 24VDC. the relay will de-energize. Reset is accomplished by removing, then Power Requirement: AC Types: Typically less than 3 VA. reapplying, the input voltage. DC Types: Typically less than 3 W. Transient Protection: Yes. INPUT ON Reverse Voltage Protection: Yes. VOLTAGE OFF Input Voltages & Limits 25C Voltage Nominal Minimum Maximum N.O. RELAY ON TIME CONTACTS OFF Type Voltage Voltage Voltage Interval on (with control switch) Input voltage must be applied AC 24 20 28 continuously to operate the internal relay. The relay energizes and timing 120 105 130 begins when the external switch is closed. At the end of the time delay DC 12 11 13 period the relay will de-energize. Reset is accomplished by opening and 24 20 32 reclosing the control switch. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). CONTROL ON AC models will operate on 50 or 60 Hz. SWITCH OFF N.O. RELAY ON TIME CONTACTS OFF Environmental Data Temperature Range: Storage: -55C to +85C. Timing Specifications Operating: -10C to +55C. Timing Ranges: From 0.1 to 1.0 sec. through 10 to 100 min. Timing Adjustment: Knob adjustable. Tolerance (for AC units add 1/2 cycle 60 Hz.): Knob Adj. Types: 0, +30% of max. specified at high end of timing range Mechanical Data min. specified, or less, at low end. Fixed Types: 10%. Termination: 8- or 11-pin octal style plug. Res. Adj. Types: 10% at high end of timing range min. specified, or less, Enclosure: White plastic case. Knob adjustable types have dial scale for at low end. reference only. Delta Time (for AC units add 1 cycle 60 Hz.): 10%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) Repeatability (for AC units add 1 cycle 60 Hz.): 2%. screw terminal sockets. 11-pin types fit either 27E123 or Release Time: 60 ms, typ. 100 ms, max. 27E892 (snap-on) screw terminal sockets. Recycle Time: 60 ms, typ. 100 ms, max. Weight: 6 oz. (170g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1228 specified. Refer to inside back cover.Catalog 1308242 Issued 3-03 P&B Ordering Information Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Delay on Release Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 24VAC 0.1 to 10 Sec. Knob 1 CB-1041B-30 24VAC 0.1 to 10 Sec. Knob 3 CB-1045B-38 1.8 to 180 Sec CB-1042B-30 1.8 to 180 Sec CB-1046B-38 0.1 to 1 Sec. CB-1001B-70 0.1 to 10 Sec. 3 CB-1021B-78 0.1 to 5 Sec. CB-1002B-70 120VAC 0.1 to 10 Sec. Knob 5 CB-1022B-78 0.1 to 10 Sec. CB-1003B-70 0.6 to 60 Sec. 3 CB-1023B-78 120VAC 0.6 to 60 Sec. Knob 1 CB-1004B-70 1.8 to 180 Sec. 3 CB-1024B-78 1.8 to 180 Sec. CB-1005B-70 24VDC 0.1 to 10 Sec. Knob 3 CB-1038D-38 1 to 10 Min. CB-1006B-70 1.8 to 180 Sec. CB-1039D-38 10 to 100 Min. CB-1007B-70 Interval on Models 12VDC 0.1 to 10 Sec. Knob 1 CB-1047D-20 Voltage Time Adjustment Wiring Dia. Part Number 0.1 to 1 Sec. CB-1026D-30 24VDC 0.1 to 10 Sec. Knob 1 CB-1028D-30 24VAC 0.1 to 10 Sec. Knob 1 CB-1043B-39 0.6 to 60 Sec. CB-1029D-30 0.1 to 5 Sec. 1 CB-1011B-79 1.8 to 180 Sec. CB-1030D-30 120VAC 0.1 to 10 Sec. Knob 1 CB-1014B-79 1 to 10 Min. 1 CB-1018B-79 24VDC 0.1 to 5 Sec. Knob 1 CB-1034D-39 1.8 to 180 Sec. CB-1036D-39 Outline Dimensions 2.406 MAX. (61.1) .60 2.937 MAX. 1.781 MAX56 (15.2) (74.6) (45.2) (14.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXTERNAL EXTERNAL CONTROL CONTROL SWITCH* SWITCH* + + CONTINUOUS CONTINUOUS + SUPPLY SUPPLY INPUT (DC POLARITY INPUT INPUT INDICATED)** (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** Fig. 3 Fig. 5 Fig. 1 11 Pin 8 Pin 8 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A dry circuit switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to + and low side to . Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1229 specified. Refer to inside back cover.