General Purpose Relays PCB Relays Potter & Brumfield Miniature PCB Relay T77 Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) n P&B 3 to 10A rating n Small size n Creepage spacings of 6.5mm between coil and contacts T77 series n 4,000Vrms coil to contact dielectric strength 10 Amp Miniature n UL Class F approved insulation system PC Board Relay File E29244 File LR48471 Typical applications Users should thoroughly review the technical data before selecting a product part Appliances, HVAC, industrial control number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. VZ Features Coil Data 20C Small size for high density PC board mounting. Voltage: 3 to 24VDC. Approvals Coil Data 1 Form A contact arrangements. Nominal Coil Power: Contact rating 3 = 200mW. VDE 40010327, UL E29244 Coil voltage range 5 to 48VDC Contact rating 10 = 450mW. Creepage spacings of 6.5mm between contact and coil. Technical data of approved types on request Operative range, IEC 61810 2 Ideal for appliance, office equipment. Coil Temperature Rise: Contact rating 3 = 35C max. Coil insulation system according UL Class E, F Contact rating 10 = 40C max. 4,000VAC dielectric strength between contact and coil. UL Class F (155C) approved insulation system. Max. Coil Power: 120% of nominal. Contact Data Duty Cycle: Continuous. Contact arrangement 1 form A, 1 NO Coil versions, DC coil, sensitive type, 200mW Rated voltage 30VDC, 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 30VDC, 277VAC code voltage voltage voltage resistance power Coil Data 20C Rated current 3 to 10A VDC VDC VDC 10% mW Contact Data 20C Rated Coil Must Must Contact material 3A type: Ag 003 3 2.25 0.15 45 200 Arrangements: 1 Form A (SPST-NO). Coil Resistance Operate Release 10A type: AgCdO 005 5 3.75 0.25 125 200 Material: Contact rating 3 - Silver. Voltage (Ohms) 10% Voltage Voltage Min. recommended contact load 100mA at 5VDC 006 6 4.5 0.3 180 200 Contact rating 10 - Silver alloy. (VDC) (VDC) (VDC) Contact Rating 3 Contact Rating 10 Max. Switching Rate: 300 ops./min. (no load). Frequency of operation 360 ops./h 009 9 6.75 0.45 405 200 3 45 20 2.25 0.15 30 ops./min. (rated load). Operate/release time max. 10ms/4ms 012 12 9 0.6 720 200 5 125 55 3.75 0.25 Expected Mechanical Life: 10 million operations. 12 720 320 9.00 0.60 Electrical endurance 024 24 18 1.2 2880 200 Expected Electrical Life: 100,000 operations. 24 2,800 1,280 18.00 1.20 3 3A type 3A, 250VAC res., -30C to +55C 100x10 ops. 048 48 36 2.4 11520 200 Minimum Contact Load: 10mA 5VDC. 3 All figures are given for coil without pre-energization, at ambient temperature +23C 5A type 5A, 250VAC res., -30C to +40C 100x10 ops. Initial Contact Resistance: 100 milliohms max. 100mA, 6VDC. 3 5A, 250VAC res, -30C to +85C 10x10 ops. 3 10A type 10A, 250VAC res., -30C to +55C 100x10 ops. Coil versions, DC coil, standard type, 450mW Contact Ratings 20C with relay properly vented. Remove vent 3 10A, 250VAC res., -30C to +85C 10x10 ops. Coil Rated Operate Release Coil Rated coil nib after soldering and cleaning. Contact ratings 3A type: 3A 250VAC code voltage voltage voltage resistance power Contact UL/CSA Ratings Type Operations 5A type: 5A 250VAC VDC VDC VDC 10% mW Rating Operate Data 20C 10A type: 10A 250VAC 003 3 2.1 0.15 20 450 3 3A 277VAC Resistive 6,000 Operate Time: 10 ms, max. (excluding bounce). 6 Mechanical endurance, DC coil 10x10 operations 005 5 3.5 0.25 55.6 450 10LRA/1.5FLA 120VAC Motor 30,000** Release Time: 4 ms, max. (excluding bounce). 006 6 4.2 0.3 80 450 5.4LRA/0.9FLA 240VAC Motor 30,000** 009 3LRA/1.5FLA 9 6.3120VAC 0.45Motor 180 100,000* 450 3A 250VAC Resistive 100,000 012 12 8.4 0.6 320 450 3A 250VAC General Purpose 100,000 024 24 16.8 1.2 1280 450 3A 30VDC Resistive 100,000 048 48 33.6 2.4 5120 450 2A 120VAC Gen. Purpose 100,000*** All figures are given for coil without pre-energization, at ambient temperature +23C 3A 120VAC Resistive 100,000*** Catalog 1308242 Catalog 1308242 Catalog 1308242 10 10LRA/1.5FLA 120VAC Motor 30,000** Environmental Data Issued 3-03 (PDF Rev. 11-04) P&B Issued 3-03 (PDF Rev. 11-04) P&B Issued 3-03 (PDF Rev. 11-04) P&B 5.4LRA/0.9FLA 240VAC Motor 30,000** Temperature Range: Storage: -40C to +130C. 10A 250VAC Resistive 100,000 Electrical endurance Operate time Coil temperature rise Figure 1 - Coil Temperature Rise Operate Time Figure 1 - Coil Life Temperature ExpectancyRise Operate Time Life Expectancy Operating: Contact Rating 3: -40C to +105C. Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 10A 30VDC Resistive 100,000 Contact Rating 10: -40C to +85C. 100 100 12 60 12 60 100 10A 250VAC General Purpose 200,00012 60 Vibration: Mechanical: 10 to 55 Hz., 1.5mm double amplitude. Contact Rating 10, Contact Rating 10, Contact Rating 10, Operational: 10 to 55 Hz., 1.5mm double amplitude. 120VAC Res. 120VAC Res. 120VAC Res. *Denotes test at 70C ambient temperature. 10 10 50 50 10 50 Shock: Mechanical: 100g min. **Denotes test at 85C ambient temperature. Operational: 10g min. ***Denotes test at 105C ambient temperature. 8 8 40 40 Operating Humidity: 45 to 85% RH. 40 8 10 10 30 6 30 6 10 30 6 Operate Time Operate Time Operate Time 20 4 20 4 20 4 Initial Dielectric Strength Contact Rating 3, Contact Rating 3, Contact Rating 3, 250VAC Res. Between Open Contacts: 750VAC 50/60 Hz. (1 minute). 250VAC Res. 250VAC Res. 2 2 10 10 2 Between Coil and Contacts: 104,000VAC 50/60 Hz. (1 minute). Mechanical Data Release Time Release Time Release Time 1 1 Termination: Printed circuit board. 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 10.1 2 0.2 0.3 0.4 0.5 8 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 3 45 6 7 9 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Enclosures (94V-0 Flammability Ratings):0.1 0.2 0.3 0.4 0.5 0.6 0.7 1 0 2 3 45 6 7 8 9 10 T77S: Immersion cleanable. Contact Current (A) Contact Current (A) Coil Power (W) Coil Power (W) Coil Power (W) Coil Power (W) Initial Insulation Resistance Coil Power (W) Coil Power (W) Contact Current (A) T77V: Vented, flux-tight, plastic cover. 8 Between Mutually Insulated Elements: 10 ohms, min. 500VDC. Weight: 0.36 oz. (9g). Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 420 specified. Refer to inside back cover. 1 10-2011, Rev. 1011 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- Ordering Information Ordering Information Ordering Information www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. Typical Part Number B T77 V 1 D 10 -24 Typical Part Number B T77 V 1 D 10 -24 Typical Part Number B T77 V 1 D 10 -24 a TE Connectivity Ltd. company Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) P&B Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 100 12 60 Contact Rating 10, 120VAC Res. 10 50 8 40 Catalog 1308242 30 10 6 Issued 3-03 (PDF Rev. 11-04) P&B Operate Time Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 20 4 Contact Rating 3, 100 12 60 250VAC Res. 2 10 Contact Rating 10, 120VAC Res. 10 Release Time 50 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 8 40 Coil Power (W) Coil Power (W) Contact Current (A) 10 30 6 Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only.Operate Time 20 4 Contact Rating 3, 250VAC Res. 2 10 Ordering Information Release Time 1 Typical Part Number B T77 V 1 D 10 -24 0.2 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 Coil Power (W) Contact Current (A) 1. Basic Series: Coil Power (W) T77 = Miniature PCB relay. Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. 2. Enclosure: V = Vented (Flux-tight)* Catalog 1308242 S = Immersion cleanable case Issued 3-03 (PDF Rev. 11-04) P&B Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 3. Contact Arrangement: 100 Ordering Information 12 60 1 = (SPST-NO) Contact Rating 10, 120VAC Res. 10 Typical Part Number B50 T77 V 1 D 10 -24 4. Coil Input: D = DC Voltage 8 1. Basic Series: 40 T77 = Miniature PCB relay. 5. Contact Rating: 10 30 6 3 = 3A 10 = 10A Operate Time 2. Enclosure: 20 4 6. Coil Voltage: V = Vented (Flux-tight)* Contact Rating 3, 250VAC Res. 03 = 3VDC 05 = 5VDC 12 = 12VDC 24 = 24VDC S = Immersion cleanable case 2 10 Release Time 3. Contact Arrangement: *Not suitable for immersion cleaning processes. 1 0.2 1 = (SPST-NO) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 3 45 6 7 8 9 10 Coil Power (W) Contact Current (A) Coil Power (W) 4. Coil Input: D = DC Voltage Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 5. Contact Rating: T77V1D3-12 T77V1D10-12 T77S1D3-12 T77S1D10-12 3 = 3A 10 = 10A T77V1D3-24 T77V1D10-24 T77S1D3-24 T77S1D10-24 Ordering Information 6. Coil Voltage: 03 = 3VDC 05 = 5VDC 12 = 12VDC 24 = 24VDC Typical Part Number B T77 V 1 D 10 -24 Outline Dimensions 1. Basic Series: Wiring Diagram (Bottom View) *Not suitable for immersion cleaning processes. T77 = Miniature PCB relay. 1 Form A 2. Enclosure: General Purpose Relays .40 .716 V = Vented (Flux-tight)* (18.20) (10.20) S = Immersion cleanable case PCB Relays Potter & Brumfield Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 3. Contact Arrangement: T77V1D3-12 1 = (SPST-NO) T77V1D10-12 T77S1D3-12 T77S1D10-12 .57 (14.70) T77V1D3-24 T77V1D10-24 T77S1D3-24 T77S1D10-24 4. Coil Input: Miniature PCB Relay T77 (Continued) D = DC Voltage 2 PLACES .16 2 PLACES 5. Contact Rating: .017 X .017 (4.0) .04 X .011 3 = 3A 10 = 10A (.45 X .45) (1.0 X .30) Outline DimensionsInsulation Data Terminal assignmentWiring Diagram (Bottom View)PCB layout Suggested PC Board Layout (Bottom View) 6. Coil Voltage: Initial dielectric strength Bottom view on solder pins Bottom view on solder pins 1 Form A 03 = 3VDC 05 = 5VDC 12 = 12VDC 24 = 24VDC between open contacts 750Vrms 4 - .051(1.3) between contact and coil 4000Vrms *Not suitable for immersion cleaning processes. .40 .716 Clearance/creepage (18.20) (10.20) between contact and coil >3.2/6.4mm .30 (7.6) .57 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. (14.70) Other Data T77V1D3-12 .100 T77V1D10-12 T77S1D3-12 T77S1D10-12 .50 T77V1D3-24 T77V1D10-24 T77S1D3-24 (2.54)T77S1D10-24 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content (12.7) refer to the Product Compliance Support Center at 2 PLACES 2 PLACES .16 www.te.com/customersupport/rohssupportcenter .017 X .017 (4.0) .04 X .011 Ambient temperature 3A type: -30C to +105C (.45 X .45) (1.0 X .30) Outline Dimensions Wiring Diagram (Bottom View) Suggested PC Board Layout (Bottom View) 5A and 10A type: -30C to +85C Dimensions 1 Form A Category of environmental protection IEC 61810 RTII - dust protected .716 .40 4 - .051(1.3) RTIII - wash tight (18.20) (10.20) Shock resistance (functional) 10g Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Shock resistance (destructive) reference purposes only.100g (millimeters) unless otherwise subject to change. Technical support: .30 421 .57 specified. Refer to inside back cover. Weight 9g (7.6) (14.70) Resistance to soldering heat THT IEC 60068-2-20 RTII: 270C/10s .100 2 PLACES 2 PLACES .16 RTIII: 260C/5s .50 (2.54) .017 X .017 (4.0) .04 X .011 Packaging/unit Tray/100, carton box/1000 (.45 X .45) (12.7) (1.0 X .30) Suggested PC Board Layout (Bottom View) 4 - .051(1.3) .30 (7.6) Product code structure Typical product code T77 V 1 D 10 -12 .100 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com .50 (2.54) Type reference purposes only. (millimeters) unless otherwise subject to change. Technical support: (12.7) 421 T77 Miniature PCB Relay T77specified. Refer to inside back cover. Category of protection V Flux proof S Wash tight Contact arrangement 1 1 Form A, 1NO Coil input Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com D DC coil reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 421 Contact rating and coil power specified. Refer to inside back cover. 450 mWcoil power 200mW coil power 5 5A type, coil power 450mW 3 3A type, coil power 200mW 10 10A type, coil power 450mW Coil voltage Coil code: please refer to coil versions table (e.g. 12 = 12VDC) Insulation system Blank UL Class 155 (F) A UL Class 120 (E) Special types Blank Standard Product code Enclosure Contact rating Cont.material Coil voltage Coil power Part number T77S1D3-05 Wash tight 3A Ag 5VDC 200mW 1-1393194-3 T77V1D3-12 Flux proof 3A Ag 12VDC 200mW 2-1393194-6 T77S1D3-12 Wash tight 3A Ag 12VDC 200mW 1-1393194-5 T77V1D3-24 Flux proof 3A Ag 24VDC 200mW 2-1393194-7 T77S1D3-24 Wash tight 3A Ag 24VDC 200mW 1-1393194-6 T77V1D10-05 Flux proof 10A AgCdO 5VDC 450mW 1-1393194-8 T77S1D10-05 Wash tight 10A AgCdO 5VDC 450mW 1393194-7 T77V1D10-09 Flux proof 10A AgCdO 9VDC 450mW 1440005-1 T77S1D10-03 Wash tight 10A AgCdO 3VDC 450mW 1393194-6 T77V1D10-12 Flux proof 10A AgCdO 12VDC 450mW 1-1393194-9 T77S1D10-12 Wash tight 10A AgCdO 12VDC 450mW 1393194-9 T77V1D10-24 Flux proof 10A AgCdO 24VDC 450mW 2-1393194-1 T77S1D10-24 Wash tight 10A AgCdO 24VDC 450mW 1-1393194-0 2 10-2011, Rev. 1011 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2011 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company